Categories

Best Hex Flange Shoulder Screw

4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【High cost performance】Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm..
  • 【100% Satisfaction Guarantee】 If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised..
Check Stock

2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【Package Include】Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw..
Check Stock

Sydien 4 Pcs 8mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector with Set Screws & Wrench

  • Metal: Fine plating metal, hardened by heat treatment, and then electroplated..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily..
  • Package: 4Pcs Flange Shaft Coupling + 1Pc Mini Hex Wrench + 10Pcs Fastening Screw..
Check Stock

Stander Security Pole, Floor to Ceiling Transfer Pole, Elderly Grab Bar and Bathroom Rail with Padded Handle, Iceberg White

  • HIGH QUALITY MATERIAL: Made of 304 stainless steel with non-slip black rubber grip for a lasting strength and quality.This shower grab bars can safely support up to 500 lbs of pull force to provide a stable handhold..
  • MULTI-PURPOSE USE: The grab bars for bathroom suitable for use as a bathtub shower handrail, and fixing clothes, towels. Of course, use safety rails in bathrooms, laundry rooms, stairs, and kitchens to prevent falls, especially for the elderly, pregnant women, disabled and children..
  • ANTI-SLIP GRAB BARS: ZEALFOXE grab bars are upgraded with non-slip soft silicone grips, which can fit five fingers perfectly, enhance non-slip factor. We provide a anti-slip silastic soft circle around the non-slip grab bars, which safe and comfortable to use..
  • HIDDEN SCREW DESIGN: Our grab bars for bathroom are designed with hidden screws, allowing easy and safe installation at any angle, covering any unsightly screw holes, keeping your bathtub and shower room clean and looking more beautiful..
  • PRODUCT PACKAGING: - Includes 2×16 Inch anti-slip shower grab bars with rubber grip, 4×three-hole flange, 4×hidden stainless steel flange cower, 12×lengthen scews, 12×wall anchor, 4×short screw. Extra Gift: 1×hex wrench, 1×screwdriver, 2×hook..
Check Stock

Shoulder Screw, 1/2 x 1-1/4, PK5

  • Price For: Each Drive Type: Hex Socket Meets/Exceeds: ASME B18.3 Finish: Plain Item: Shoulder Screw Type: Imperial Head Style: Knurled System of Measurement: Inch Class: 3A Drive Size: 1/4" Thread Size: 3/8-16 Shoulder Length: 1-1/4" Material: Alloy Steel Screw Head Height: 1/2" Head Height: 0.302" to 0.312" Head Dia.: 0.729" to 0.750".
  • Shoulder Dia.: 1/2" Min. Tensile Strength (PSI): 140, 000 Rockwell Hardness: 32 to 43 HRC Thread Length: 5/8" Shear Strength (PSI): 84000 Country of Origin (subject to change): Multiple.
Check Stock

(20 PCS) 3/8-16 Stainless Steel Serrated Flange Nuts,Flange Lock Nut,by Fullerkreg

  • 【】 Package Content: 60pcs * M8 Hex Flange Nuts.
  • 【】Name: M8 Serrated Hex Flange Lock Nuts.
  • 【】 Mostly used on pipes that are connected or that require additional nut contact surfaces..
Check Stock

MTD 712-0417A Hex Flange Nut 5/8-18- 3 Pack

  • Known as Hex Flange Nuts, Flange Lock Nuts, Spindle Nuts, Blade Lock Nuts, this nuts are used to secure a blade to the spindle.
  • Work with MTD, Craftsman, Troy Bilt lawn mowers & tractors. Had been tested and confirmed to work with LT1040 LT1042 LT1046 LTX1040 mower deck spindles.
  • Replace the part# 712-0417, 712-0417A, 912-0417, 912-0417A, 753-05549, 112-0330.
Check Stock

18-8 Stainless Steel Hex Flange Nut, Plain Finish, Self-Locking Serrated Flange, ASME B18.2.2, 3/8\-24 Threads, 9/16\ Width Across Flats, 11/32\ Overall Height (Pack of 10)

  • ☛Package Content: 26Pcs x Hex Flange Nut.
Check Stock

Multi-function 7mm-19mm Ratchet Universal Sockets Metric Wrench Power Drill Adapter Set and 105 Degree Right Angle Extension Power Screwdriver Drill Attachment 1/4\ Drive 6mm Hex Magnetic Bit

  • ...cordless screwdriver, max torque: 10n/m.105 degree right angle head, designs for tight spaces, extends the power of a cordless screwdriver.Extends power of cordless screwdrivers-100 in/lbs. torque, 400 RPM..
  • 105 degrees angle extension, in which you use when you have hard places to get to,360 degree adjustable thumb flange.It can connect hand drill and manual wrench.The function head is equipped with a locking and magnetic device, to ensure that the sleeve does not fall.Built-in strong magnet for good holding power, accepts all 1/4" standard hexagon shank bits.Apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces..
Check Stock

Toolly 180PCS M6 Bolts Nuts Kit Furniture Bolt Crib Screws Kit Hex Socket Head Cap Screws Nuts Barrel Bolt Nuts for Crib Bunk Bed Cot (M6×20mm - M6×80mm)

  • 【Package includes】 Including 66 M6 bolts (7 sizes) and 120 M6 nuts (30 insert nuts, 60 barrel nuts, 30 flange nuts) and 2 hex wrench..
  • 【Wide application】 Suitable for cribs, bunk beds, cabinets, tables, chairs, cribs and other furniture. It is also the perfect choice for connecting wooden boards, workbenches, headboards, cabinets and other furniture.
  • 【High quality】 This crib screw set is made of high-speed galvanized metal, which is abrasion-resistant, rust-resistant..
  • 【Easy to Install】 This kit are packed in a portable transparent storage box. Convenient for your storage and carrying on..
  • 【Hexagon Wrench Is Included】 Hexagon socket screw nut thread m6 set conforms to the standard metric system, and the complimentary hex wrench is convenient for you to complete the work excellently..
Check Stock

Shoulder Screw, 1/2\X2\

  • Price For: Each Head Height: 1/4" System of Measurement: Inch Shoulder Length Tolerance: +/-0.005" Drive Size: 3/4" Head Dia.: 3/4" Thread Size: 3/8-16 Thread Length: 3/4" Item: Shoulder Screw Shoulder Dia.: 1/2" Head Style: Hex Class: 2A Shoulder Length: 2" Min. Tensile Strength (PSI): 57, 000 Rockwell Hardness: B68 to B71 Material: Steel.
  • Finish: Zinc Plated Country of Origin (subject to change): United States.
Check Stock

Metric Class 8.8 Hex Cap Flange Frame Bolts & Flange Nuts Assortment Kit - 383 Pieces!

  • 383 Pieces - High Quality Class 8.8 Flange Bolt & Nut Assortment!.
  • Bolts: Metric Class 8.8 Hex Flange Bolts Zinc Yellow.
  • Nuts: Matching Hex Flange Nuts CL8 Zinc Yellow.
  • Heavy Duty Locking Steel 24 Hole Compartment Tray (Dim: 13-3/8" Width x 2" Height x 9-1/4" Depth).
  • M6", M8" M10", & M12" Coarse Diameters Included (See photos for specific sizes).
Check Stock

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, 1/4\-20 Thread Size, 1\ Length (Pack of 10)

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.
  • 18-8 stainless steel provides good corrosion resistance and strength.
  • Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side.
Check Stock