Categories

Best Hex Head Stud Extractor

Hanson 53205 Extractor 1/4 Multi Spline for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors are ideal for high-torque applications.
  • Each IRWIN screw extractor has an aggressive left-hand spiral design for extra gripping power.
Check Stock

Lisle 68500 Manifold Drill Template for Ford 2V & 3V

  • Interchangeable plates and alignment pins ensure drill is centered on the broken stud.
  • Depth gauge for drilling is marked on the template. Designed to remove broken exhaust manifold studs on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford Triton engines without damaging the cylinder head..
  • The stripped screw extractor is then used to remove the broken stud.
Check Stock

Hanson 52207 Screw Ext Multi Spline 5/16 for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors are ideal for high-torque applications.
  • Each IRWIN screw extractor has an aggressive left-hand spiral design for extra gripping power.
  • 5/16-inch recommended drill bit diameter.
  • 1/2" hex head and 9/16" bolt diameter.Item # 53225 shown.
Check Stock

Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001

  • ❤️This kit has 14 long studs, 4 medium length, and 16 short studs..
  • ❤️ This listing is for the sbc head stud kit. We have used this kit on all of our sbc engine buildups, and the fitment is perfect. You will receive every stud needed to install both cylinder heads on your engine..
  • ❤️These head studs are made from aircraft quality 8740 high tensile strength chrome moly steel. They are twice as strong (190,000 psi steel alloy) as the stock head bolts. Kit that comes complete with 12 point hex nuts and washers. Very similar or rather identical in design and function to the ARP kits..
  • ❤️Studs make head installation a lot easier as the studs align the head and hold the head gasket in place.
  • ❤️ They clamp much better since the stud is loosely threaded into the block and the clamping torque is generated at the stud-nut interface rather than the block-bolt interface.
Check Stock

Segomo Tools 13 Piece Lug Nut and Bolt Extractor Removal Metric and SAE Socket Tool Set 8-19mm | Lug Nut Remover | Bolt Remover | Lug Nut Extractor | Extractor Set | Lug Nut Removal Tool - NBE13819MM

  • [ Easy To Use ] Our lug nut remover is designed with left-hand spiral for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
  • [ Every Size You Need ] This nut extractor set comes in sizes: 1/4, 5/16(8mm), 3/8, 10mm, 7/16(11mm), 12mm, 1/2, 13mm, 9/16(14mm), 5/8(16mm), 17mm, 11/16, 3/4(19mm). Can be used on SAE and Metric sizes.
  • [ Will Last In Time ] The lug nut extractor set is made from black chrome molybdenum that provides greater strength and durability and prevents corrosion. Our extractor socket set will be with you for years..
  • [ Versatile Design ] The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws. You can use this bolt extractor set on different projects..
  • [ Used With Multiple Tools ] 3/8 square drive of each bolt extractor tool can be used with flat wrench, pliers, socket wrench, adjustable wrench, Vise-Grip locking pliers, hand ratchets or impact wrench guns and air ratchets. Lifetime warranty.
Check Stock

Eapele Impact Bolt Nut Removal Extractor Socket Tool Set for 1/2 inch drive 6pcs

  • Eapele lug remove set with Easy-Out technology and a left-hand spiral design for superior gripping power to remove broken bolts, screws, and studs.The....
  • High-strength 40Cr--- Each socket is made of heat-treated 40Cr vanadium steel and coated in Manganese Phosphate for industrial or mechanical use and....
  • Handy to use---To remove the bolt, simply attach the extractor to a ratchet and place over the damaged head. You can tap it on using a hammer or....
  • Center Punch Bar---A hex top on the extractor makes it easy to use a wrench instead of a ratchet. Once removed, use the center punch to knock the bolt....
  • Portable Case---Each spline extractor has the size etched on for quick reference. A heavy-duty carrying case is included to help ensure a longer life....
Check Stock

HORUSDY 25-Pieces Screw Extractor Set, Hex Head Multi-Spline Easy Out Bolt Extractor Set, Chrome Molybdenum Alloy Steel Rounded Bolt Remover

  • 【High-Quality】Hex head multi-Spline screw and bolt extractor set is made of heat-treated high-quality high-carbon steel ..
  • 【Convenient application】Precision made with left hand spiral design provides more gripping power and faster tapping..
  • 【Widely Applicable】The extractor set is suitable for removing broken studs, bolts, threaded pipes , pins,hexagon socket screws , fittings and more..
  • 【Unique Design】Unique hexagon head provides maximum torque with wrenches and sockets ..
  • 【Portable Storage Box】Includes 25 pieces of extractors with obvious size marked on each one (from 1/8 inch (3.5 mm) to 7/8 inch (23 mm).all collected in a heavy duty carrying case ,easy storage and organization..
Check Stock

Damaged Screw Extractor Set, 12Pcs Screw Extractor Kit, Easy Out Bolt Extractor Set and Drill Bits Guide Set for for Broken Bolts Removing Hand Tools, 4-25mm(1/8-1") Broken Screws

  • Damaged Screw Extractor: These extractors kit will remove most kinds of damaged, rusted, broken or stuck screws from any wood or metal surface. The easy-to-remove extractor set is made from premium steel, high temperature quenching, surface anti-rust treatment, strong and durable. Easily remove damaged or broken screws, bolts, studs, threaded pipe fittings and so on..
Check Stock

ARES 70016 - Damaged Bolt and Stud Extractor Tool - Grips and Removes 1/4-Inch to 1/2-Inch Studs - Ideal for Broken, Rounded Off, Painted Over, and Rusted Tight Bolts

  • ABOUT THE TOOL: This damaged bolt and stud extractor tool is 3/8-inch drive and can be used with manual or pneumatic impact wrenches and ratchets. The hexagonal flat can also be used with flat wrenches, adjustable wrenches, sockets, and locking pliers. Manufactured with high-grade Heat-Treated Alloy Steel for maximum durability, this tool also features a chrome finish for additional rust protection..
  • MULTIPLE USES: This bolt extractor will save hours of frustration on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, rusted tight bolts and more..
  • TRADITIONAL BOLT EXTRACTORS: Traditional bolt extractors force the user to guess which size the damaged stud is. They have a tendency to strip the screw even more and shave metal off without budging the screw, leaving you worse off than when you started. The design of this bolt extractor allows you to clamp down on the damaged stud, eliminating the guess work..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you ha....
Check Stock

for sbc Valve Covers Gorgeri Cover Bolt Set,8 PCS Stainless Steel Cover Bolt Set Fits for 283 302 305 307 327 350 383 400 SBC Engine

  • Small Block Chrome Hex Valve Cover Bolts Set For CHEVY 283 305 327 350 383 SBC STUD KIT 8PCS/SET,Chrome Steel With Black Oxide Finish.
  • FITS 283 302 305 307 327 350 383 400 ENGINES..
  • SIZE - Bolts are 1/4" - 20 Thread Pitch. Bolts Measure 1 3/8" IN Length studs measure 1 1/4" IN Length..
  • EASY INSTALLATION - Direct replacement, fitment tested before shipping, no extra adjustment needed..
  • WHAT YOU'LL GET - Set of 8 CHROMED STEEL HEX HEAD BOLT KIT & 12 Months Warranty, If the chromed steel hex head bolt ever fails on your vehicle, or you got any problem with our products, feel free to contact us, we will sort things out together..
Check Stock

Loboo Idea Speed Out Screw Extractor Drill Bits Tool Set Broken Damaged Bolt Remover Guide Set Broken Easy Out Fastener Kit (5 Pieces, HSS 4341# Silver)

  • ...ting: Each bit has dual head designs, one is used to drill a hole in the middle of the the damaged screws or bolt with the drill end, the other is used to extracting it. The special design helps you grab and remove the screws precisely and easily in 10 seconds or less..
  • H.S.S 4341 Material: Loboo Idea stripped screw extractor is made of high quality H.S.S 4341 material, has 63-65 HRC hardness which is harder than most of other similar products. Durable and solid, suitable to removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts. Best gift for any craftsman..
  • Multi Purpose: 5 different sizes of bits (#0, #1, #2, #3, #4) are included in package of stripped screw remover kit and #0 is a gift provided for extra using. All is for ensuring that the screw extractor kit can meet all of your needs. Great for removing stripped, broken head, rusted, unscrew, free-spinning and deck screws or bolts..
  • Easy to Use: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
  • Wide Application: The screw and bolt extractor can work on Allen bolt....
Check Stock

IRWIN Screw Extractor Set, Hex Head, Multi-Spline, 25-Piece (53227)

  • VERSATILE: Remove broken studs, bolts, socket screws and fittings for high torque applications.
  • GRIPPING POWER: Aggressive left hand spiral design for extra gripping power.
  • EASY-OUT STYLE: Spiral flutes embed themselves to increase grip as resistance increases.
  • ETCHED SIZES: Extractor size and recommended drill bit size are etched on each tool.
  • 25-PIECE SET: Hex head multi-spline extractors from 1/8"-7/8" in heavy-duty carrying case.
Check Stock

Concrete Sleeve Anchors 1/2 x 4 - 25 Pcs Hex Head Sleeve Anchors Concrete Bolts Hex Nut Sleeve Anchor Concrete Sleeve Anchor Hex Sleeve Anchors Zinc Plated

  • CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
  • CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
  • SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
  • Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.
Check Stock