Categories

Best Hex Indexing Plungers

Plumb Craft Universal Plunger Holder Drip Tray, White (1 Pack)

  • Keeps Floors Sanitary, Clean, and Dry - universal tray has a lower footprint and is lightweight, easily tucked into corners when not in use..
  • Quick Drying, Secure Fit - The spoke design at the bottom of the tray dries quicker and holds plungers securely in place..
  • Wide Openings For Quicker Storage - Insert your plunger from the top, or through the opening in the front..
  • Fits Nearly All Plungers - From bellows plungers to regular rubber cups most any plunger will fit..
  • Pack Includes: (1) universal plunger drip tray, 7 1/2" diameter, white.
Check Stock

Hand Tools EPX PLUS II APPLICTR 2:1 AND 1:1 PLUNGER

  • This is a special MixPac DMA50 Dispensing Kit with all plungers included to use 1:1, 2:1 and 3:1 ratio 3M adhesive cartridges, as well as all standard “square-back” cartridges.
  • Works with 3M’s 1:1 ratio 50ml cartridge AND their special 2:1 ratio 37ml cartridge.
  • Also works with all standard 50ml “Square-Back” design cartridges with 1:1 and 2:1 ratios.
  • Kit Includes 3 different plungers: 1) a 2:1 ratio unique to 3M 2:1 ratio 47ml cartridges, 2) a uiversal 1:1 and 2:1 plungers for all standard “Square-Back” cartridges, 3) a universal 10:1 ratio plunger for all standard “Square-Back” cartridges.
  • Consistent and precise metering: Full Squeeze dispenses 4.1 grams (2 plunger clicks).
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

20 ton Ultra-Thin Hydraulic Lifting Cylinders 20 Ton Stroke 0.52\ Hydraulic Cylinder Industrial Lifting Jack Ram Low Height

  • *Low height:20 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 13 mm（0.52"） provide the maximum power to height ratio. A compact, low height cylinder design is ideal for confined spaces where other cylinders will not fit..
  • *Stopping ring: protect the cylinder when the stroke get to top, absorbing heaviness from the other side.
  • *Plated steel plungers:hard chrome plated high quality steel plungers plunger avoid break ing when it is overloaded.
  • *Single-acting spring return: provides fast and complete retraction.
  • * Corrosion resistance:hard chrome plated high quality steel plungers and cylinder wall for increased corrosion resistance.
Check Stock

Meadow Lane Mini Sink Plunger with Ergonomic Handle, Kitchen Drain Plunger, 4.5" x 4.5" x 7.5", Strong Suction Power to Unclog Slow Sinks, Drains, Tubs, Showers, Yellow 1-Pack

  • NONSLIP HANDLE: Our plunger features a slip-resistant, ergonomic handle for quick and easy unclogging. Unlike plungers with flimsy handles that cause hand cramping, our mini plunger unclog your sinks easily so you don’t have to break a sweat.
  • COMPACT: 4.5"x4.5"x7.5" mini plunger is ideal for bathroom or kitchen sinks. Whenever you need to quickly and effectively unclog a drain, simply pull out your compact plunger and enjoy a smooth flowing drain.
  • HIGH-GRADE RUBBER GASKET: Featuring a durable rubber gasket to effectively unclog drains. Small plungers typically lack suction. Our innovative, multi-layer rubber gasket design provides strong suction and effective unclogging on standard-sized drains.
  • FITS MOST SINKS: Our small plunger fits most sinks where standard-sized plungers are inconvenient to use. Use the mini plunger for sinks and keep your toilet and sink plungers separate. Small plunger is ideal for the sink, kitchen, bathtub, shower, office, and more.
  • ACCORDION DESIGN: Mini accordion plunger design for easy suction.
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • ...ed, jig or fixture more strength and stability and it won’t bend or warp..
  • When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..
  • Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well..
  • The bar is approximately 18 inches long and will fi....
Check Stock

A-Line It Basic Kit with Dial Indicator For Aligning and Calibrating Work Shop Machinery Like Table Saws, Band Saws and Drill Presses

  • Quickly set-up, tune up, and check the accuracy of your shop's tools with this system. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, out-feed table alignment.
  • router/shaper spindle run-out, or any other set up or alignment measurement you desire..
  • The A-LINE-IT Basic Kit is the perfect starter kit for hobbyists and small shops..
  • The 1" capacity dial indicator reads in .001" increments for absolute precision. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot..
  • Dial indicator mounting bar measures 3/4” x 3/4” x 5-1/2”, miter groove bar measures 3/8” x 3/4" x 6-1/4"..
  • Comes with hardware and hex wrench for assembly, instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines..
Check Stock

POPLOCK 3 Piece Pry Bar Set/Adjustable Pry Bar Mechanic Tools Set/Indexing Pry Bars Set Heavy Duty/Index 11 Angles/Two Joint 17 Inch Prybar/Automotive Car Auto Body Tools 8 12 17 Inch

  • 3 Piece Pry Bar Set - 3 piece Indexing Pry Bars including 8, 12 and Double Joint 17 inch. Adjustable pribar Ideal for serpentine belt remove, automotive heavy duty work, grind blade prying tip head..
  • Adjustable Mechanic Tool Set Prybar Heavy Duty Mechanism Design - Patented Innovative Unique Double Gear Indexing Pro Bar Tool Design with 2 sides Push Locking mechanism design for Car Auto Body Tools.
  • 11 Position Indexing Pry Bars - Adjustable Mechanics Pro Bar Prying head with incremental angles 18 degrees allows the prybars choose up to 11 Indexable prying angles for different tight spaces.
  • Double Joint for Index Pry Bar 17" - 17 Inch Pribar with extra Index Joint locking feature which creates additional 11 Index positions and great automotive, industrial machinery jobs.
  • Prying Remover Men Gifts - Precise forged head and body with sharp prybar blade edge allows user to easily break apart the tight components. Indexing pry bar design Torque exceed ANSI over 3 times.
Check Stock

MR.PUNG Kitchen Washbasin Sink Plungers & Co2 Cylinders 1Box (10 pcs) & Simple English User Guide

  • MR PUNG forms an air-tight seal around the pipe before a single blast of compressed air instantly dislodges and clears the blockage..
  • MR PUNG will clear even the most stubborn blockages standard plungers or rods cannot shift..
  • MR. PUNG can also be used regularly to keep pipes perfectly clear..
  • Contains no chemicals, makes no mess, simple, safe and highly effective!.
  • Composition :Toilet Plungers Main Body 1 PCS,Co2 Cylinders 1Box (10 pcs).
Check Stock

Jergens 10974 Metric Steel Ball Plunger, Low Carbon Steel, M5 x 0.8 Thread, With Locking Element

  • 10 PIECES:There are total 10 pieces of ball plungers in one set that you may use for many projects..
  • WIDELY APPLICABLE :Widely applicable for mechanical devices, clamps, molds, automatic machines, etc..
  • THREAD: Screw thread has the function of fastening, the spiral section is smooth, no residual, no burr, the thread is neat and clear..
  • CARBON STEEL MATERIAL:Made of carbon steel material, these ball plungers are sturdy and durable..
  • GREAT PARTS:They are great parts for providing pressure and accurate positioning..
Check Stock

Starrett S579GZ Self Centering Telescoping Gauge With 2 Telescoping Arms Set, 5/16\ - 2-1/8\ Range, 2-3/8\ Handle Length (4 Pieces)

  • Set of four telescoping gauges for measuring holes, slots, and recesses in woodworking, metalworking, machining, layout, and pattern-making applications.
  • Two spring-tensioned telescoping plungers for uniform contact pressure.
  • Self-centering handles are rigidly attached to contact plungers.
Check Stock

Speakman S-3018 Rainier Anystream High Pressure Adjustable Shower Head, Polished Chrome

  • 5 plungers with 50 sprays, 8 massage jets, 3 spray patterns.
  • Patented Anystream plungers resist scale build-up.
  • Products with flow rates over 1. 8GPM cannot ship into the state of California.
  • Features patented Anystream 360° technology.
  • Equipped with 5 adjustable jets producing 40 individual sprays with 8 massage spray jets.
  • Constructed of lightweight Speakman engineered plastic.
  • 2.5 gpm flow control, fits standard U.S. plumbing connections.
  • Limited lifetime warranty, same quality grade used in hotels.
  • Self-cleaning nozzles offer consistent powerful spray performance even under low water pressure.
  • The Rainier Collection includes faucets, valves & trim, tub spouts and shower combinations.
Check Stock

Speakman S-2255-PB Anystream Showerhead, 2.5 GPM, Polished Brass

  • Equipped with the patented Anystream 360° technology that allows users to effortlessly transition through diverse spray settings and evenly distributes water for perfect coverage.
  • Patented plungers control the spread of water as it leaves the nozzle, allowing pressure to build and intensify, resulting in a remarkably powerful performance even with low water pressure.
  • Self-cleaning plungers resist hard-water buildup and sediment, making it easy to clean and maintain.
  • Spray settings include intense, rain and full flood.
  • Features patented Anystream 360° technology.
  • Constructed of durable, solid brass ensuring quality and longevity.
  • Equipped with 6 adjustable jets producing 48 individual sprays.
  • 2.5 gpm flow control, fits standard U.S. plumbing connections.
Check Stock