Best Hex Locknut

Prime-Line 9074800 Nylon Insert Lock Nuts, #4-40, Grade 2 Zinc Plated Steel, (50-pack)

  • Nut Type: Hex Locknut with Blue Nylon Insert.
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
  • Made of 304 stainless steel (no coating outside), provides good strength and corrosion resistance in bad environments..
Check Stock

Ideal Tridon 300300356051 Stainless Steel 30030 Series 201/301 T-Bolt Spring Loaded Hose Clamp, Heavy Duty, 86 SAE Size, 90.5 mm - 98.4 mm Hose OD Range

  • Band/Bridge: 3/4" width, 201/301 stainless steel.
  • Spring: Plated steel. Nut: 7/16" hex, nylon insert, plated steel locknut.
  • Installation torque is 75.0 in.-lbs. or 8.5 Nm.
Check Stock

OTC 1909 3-1/4" 8-Point Octagon Locknut Wrench

  • 3-1/4 inch 8-point octagon locknut wrench.
  • High strength steel resists rounding out.
  • For use with 3/4 inch square-drive manual tools only.
  • Measure from flat to flat to determine size of locknut.
Check Stock

Innovative Components ANH3-HEX5S3A 1.75\ Snap Lock Star knob hex hole to accept 3/8\ nuts and bolts, black pp (Pack of 10)

  • Add your own hexnut, locknut, head head bolt or capscrew to make the knobs you need for your specific application. Versatile , quick, easy solution that reduces sku's and allows for use of fasteners in varying materials , lenghts and thread pitches.
  • Contemporary Satin Textured Finish ,Scratch and Dirt resistant.
Check Stock

KiWAV Tappet Valve Adjustment Wrench Tool Set Timing Chrome Vanadium Steel

  • The hand tool allows micro adjustment without disturbing the locknut which can be tightened when the correct clearance is achieved..
  • Use a 12mm wrench to hold the locknut socket while using square type driver to loosen or tighten the valve adjustment screw..
  • 8, 9mm locknut sockets and 3mm square type driver included..
  • Fits most motorcycles and ATVs with screw-type tappet adjustments..
Check Stock

NOVINO 14-1/2Dia X 19Pitch Boat Outboard Propeller for Mercruiser Alpha One Prop/Mercury Engine 135 150 175 200 220 225 250 300HP,3-Blade Aluminum 14.5dia x 19 Pitch Propeller,Replace OEM#48-832830A45

  • ... pitch Mercury/Mercruiser propeller,lower fuel consumption and great speed acceleration or rmps,,reduce the wear and tear on engine.
  • Easy Install: The propeller with hub kit Includes Flo-Torque hub kit (hub, splined hub, thrust washer, prop nut and keeper),Just remove prop locknut&locknut retainer& forward thrust washer.Then Install forward thrust washer---Insert drive sleeve into prop---Slide prop on prop shaft---Insert drive sleeve adapter--Slide locknut retainer---Install prop locknut---Insert sth to prevent spinning--Tighten prop locknut.
  • Fitment:perfect propeller replacement for 14.5x19pitch Mercury Engines 135 150 175 200 220 225 250 300HP&Mercruiser Alpha One Bravo One,detail information pls see below.
Check Stock

Innovative Components - ANH7-HEX4P7---- ANH7-HEX4P7- 2.50\ Snap Lock 4 Prong Knob hex hole to accept 1/2\ nuts and bolts, black pp (Pack of 10)

  • Add your own hexnut, locknut, head head bolt or capscrew to make the knobs you need for your specific application. Versatile , quick, easy solution that reduces sku's and allows for use of fasteners in varying materials , lenghts and thread pitches.
  • Contemporary Satin Textured Finish ,Scratch and Dirt resistant.
  • Package dimensions:9.0" (L) x 9.0" (W) x 9.0" (H).
Check Stock

Jonard Tools AHC-10 Professional Grade Round Hole Saw Cutter Includes Dust Shield and Case Cuts Plywood Plasterboard Sheetrock Acrylic Up to 1 1/16” Thick Adjustable Hole Size 2.2” to 10”

  • WHAT’S IN IT: Adjustable hole saw cutter, polycarbonate dust shield, rugged case.
  • VERSATILE USE: Cuts round holes in plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16” (2. 7 cm) thick and can be used with any....
  • ADJUSTABLE SIZE: Cuts hole sizes from 2. 2” to 10” (55 mm to 254 mm) and cutting depth is up to 1 1/16” (27 mm) with adjustable hex locknut and....
  • SAFE OPERATION: Tool has a compression spring that absorbs vibrations while cutting and polycarbonate transparent dust shield collects dust and....
  • HIGH DURABILITY: Rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris.
Check Stock

Sigma Electric ProConnex C-560 Snap Lock AC/MC Connector 3/8-Inch, 25-Pack

  • Terminates AC or MC to a 1/2" knockout without a locknut.
  • For aluminum or steel 14/2 - 10/3 AC or MC.
  • No locknut assembly for faster installation.
Check Stock

Valterra RF850 1/4\ MPT x 3/8\ Barb Adapter

  • Right Angle Nylon Cable Glands NPT Thread - These Right Angle Cable Glands are corrosion resistant..
  • Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
  • Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation.
  • Threads into your panel for clearance, locknut included.
Check Stock

Gardner Bender LNW-3PC LNW locknut wrench, Assorted

  • Locknut wrench solves the problem of tight spaces and fits the majority of UL locknuts.
  • Etched markings allow for easy identification.
  • clearly marked tighten and loosen ends make usage a breeze.
  • each tool is a different color for easy size identification.
  • Thin design allows easy maneuvering in tight locations.
  • Hooked tip latches onto locknut and maximizes turning leverage.
  • 3-piece kit includes the 1/2 in. , 3/4 in. and 1 in. sizes.
Check Stock

Morris 21816 Liquid Tight Connector Straight Non-Metallic 1-1/4 Thread Size 1-Pack

  • Non-Metallic Liquid Tight Wire Connectors Straight With Steel Locknut - Our Liquid Tight Straight Connectors are weather and corrosion-proof..
  • For use with Non-Metallica Liquid Tight conduit.
  • Type B - Nylon construction with Zinc Die Cast Locknut - resists saltwater, gasoline, alcohol, oil and grease.
Check Stock

Whittet-Higgins CNM-08 Threaded Clampnut/Shaft & Bearing Locknut Collar, Metric M40 x 1.5 Right-Hand Thread, Self-Locking,

  • Slit locknut design with socket head cap screw provides single-point tangential locking.
  • Self-Locking. Prevents assemblies from loosening from large forces of vibration, shock and torque.
  • Easier and faster to install than traditional locknut & lockwasher.
  • Black oxide coating with wax finish to inhibit corrosion.
Check Stock