Categories

Best Hex Shaft Coupling Set

2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【Package Include】Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw..
Check Stock

Sydien 4 Pcs 8mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector with Set Screws & Wrench

  • Metal: Fine plating metal, hardened by heat treatment, and then electroplated..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily..
  • Package: 4Pcs Flange Shaft Coupling + 1Pc Mini Hex Wrench + 10Pcs Fastening Screw..
Check Stock

Heyiarbeit 5pcs 4mm to 4mm 2 Section Rotatable Universal Joint Coupling Shaft Stepper Motor L52xD12 U Joint Coupler Connector with Screw for RC Model Motor, RC Robot, DIY Encoder, CNC Machine

  • [Total Size] - Outer Diameter: 12mm / 0.47".
  • Connection Diameter: 4mm to 4mm / 0.16" to 0.16".
  • [Material] - This universal coupling is made of premium iron metal material, which is durable and has a long service life, fine workmanship.
  • [Feature] - The universal joint of the purpose is to firmly connect the driving shaft and the driven shaft to rotate together and transmit motion and torque, cost effective coupling design, which is very flexible and easy for use, and is great replacement for your old or broken one.
  • [Design] - Rotatable design. Allow the angle between the two axes within a limited range vary with operational needs, and easy to set up the items on the shaft and control the holding capacity of the coupling.
  • [Wide Application] - Universal joint coupling are used in servo motor systems, 3D printer, cnc machine, diy encoder, spindle transmissions, stepping motors, lifting platforms, machine tool transmissions, stepping motors, encoders, screw drives, machine platforms or gearboxes, etc.
  • Great suitable for short support shaft, bushing model, miniature Shaft, model airplane/ boat/ car.
Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

CENTAURUS 4Pcs Universal Motor Joint Shaft Coupling 4mm to 4mm with Screws

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade Universal Motor Joint Shaft Coupling 4mm to 4mm is 100% brand new,wearproof, durable and widely used for motor etc..
  • 【HIGH QUALITY】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is made of high quality wearproof steel material which can use for a long time..
  • 【WIDE APPLICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is widely used for shaft connection,produced based on International Flange Standard..
  • 【MAIN SPECIFICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm ,Inner Diameter: 4mm to 4mm. Outer Diameter is 9mm. Height is 23mm. Color: Silver.
  • 【PACKAGE & SERVICE】Package Include: 4Pcsx 4mm to 4mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 7mm to 7mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories

  • Total Length: 22mm/0.87 inch, Outside Diameter : 14mm/0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 4mm to 4mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 4mm to 4mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 5mm to 6mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories,2pcs

  • Connection Diameter: 5mm to 6mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 1/8 inch to 5mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 1/8 inch to 5mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue

  • Connection Diameter: 5mm to 5mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 6mm to 10mm Bore Rigid Coupling Set Screw L22XD16 Stainless Steel,Shaft Coupler Connector,Motor Accessories,2pcs

  • Connection Diameter: 6mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock