Categories

Best Hex Shaft Mini Coupling

uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

BENLIUDH 4 Pcs Universal Joint Shaft Coupling 4mm to 6mm Inner Dia U Joint Coupler with Screws for Motor

  • Material：Universal joint shaft coupling is made of nickel-coated iron，much stronger, wearproof, Long service life。.
  • Dimensions：Inner Diameter: 4mm to 6mm，Outer Diameter: 11mm/0.43”；Height: 24mm/0.94”。.
  • Package Include：4 x universal joint shaft coupling, 1x hex wrench, 8 x fastening screws。.
  • Application: The universal joint is suitable for the use of the straight shaft of the motor, and is suitable for the use of various metals such as model cars, model boats, and robots，It is suitable for various general machinery occasions。.
  • It Can be bent at any angle (rotation angle is 45 degrees), and the universal joint can change the transmission direction at any angle。.
Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

CENTAURUS 4Pcs Universal Motor Joint Shaft Coupling 4mm to 4mm with Screws

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade Universal Motor Joint Shaft Coupling 4mm to 4mm is 100% brand new,wearproof, durable and widely used for motor etc..
  • 【HIGH QUALITY】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is made of high quality wearproof steel material which can use for a long time..
  • 【WIDE APPLICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is widely used for shaft connection,produced based on International Flange Standard..
  • 【MAIN SPECIFICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm ,Inner Diameter: 4mm to 4mm. Outer Diameter is 9mm. Height is 23mm. Color: Silver.
  • 【PACKAGE & SERVICE】Package Include: 4Pcsx 4mm to 4mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

1/2-13X1 3/4 Hex Rod Coupling Nut 3/4 inch Across Flats Grade 5 Zinc (Pack of 5)

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: toppros offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

Star 1/2 HP Submersible Well Pump with Carbon Steel Shell (3 Wire) 4 Inch, 230 Volt, 10 GPM, 4H10G05301

  • 1/2HP 4 Inch submersible well pump with powder-coated and corrosion resistant carbon-steel shell and 1-1/4 Inch discharge that has a built-in check valve that is removable, internal, and positive-sealing.
  • Rated at 7 GPM water pumping capacity - Great for small homes, cottages and light water usage applications - requires a 4" (10 cm) minimum inside well diameter.
  • Quiet and economical operation with no priming required - Features a stainless steel motor shell and drive shaft for quiet operation and stainless steel hex drive shaft with one-piece stainless steel motor-to-shaft coupling.
  • NEMA standard 3 wire motor with ground wire - this 230 Volt well pump requires a control box (sold separately) and comes with a splice kit for completing all electrical connections.
  • 100% Factory Tested - Will pump water from 100 feet.
Check Stock

TOPPROS Pack of 4 M8 X 1.25-Pitch 40 mm Length Metric Hex Coupling Nut 304 Stainless Steel Rod Coupling Nuts

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: TOPPROS offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

TOPPROS Pack of 6 M8 X 1.25-Pitch 24mm Length Metric Hex Coupling Nut 304 Stainless Steel Rod Coupling Nuts

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: toppros offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

Heyiarbeit 5pcs 4mm to 4mm 2 Section Rotatable Universal Joint Coupling Shaft Stepper Motor L52xD12 U Joint Coupler Connector with Screw for RC Model Motor, RC Robot, DIY Encoder, CNC Machine

  • [Total Size] - Outer Diameter: 12mm / 0.47".
  • Connection Diameter: 4mm to 4mm / 0.16" to 0.16".
  • [Material] - This universal coupling is made of premium iron metal material, which is durable and has a long service life, fine workmanship.
  • [Feature] - The universal joint of the purpose is to firmly connect the driving shaft and the driven shaft to rotate together and transmit motion and torque, cost effective coupling design, which is very flexible and easy for use, and is great replacement for your old or broken one.
  • [Design] - Rotatable design. Allow the angle between the two axes within a limited range vary with operational needs, and easy to set up the items on the shaft and control the holding capacity of the coupling.
  • [Wide Application] - Universal joint coupling are used in servo motor systems, 3D printer, cnc machine, diy encoder, spindle transmissions, stepping motors, lifting platforms, machine tool transmissions, stepping motors, encoders, screw drives, machine platforms or gearboxes, etc.
  • Great suitable for short support shaft, bushing model, miniature Shaft, model airplane/ boat/ car.
Check Stock

TOPPROS Pack of 8 M6 X 1.0-Pitch 30mm Length Hex Width 10mm Metric Hex Coupling Nut 304 Stainless Steel Rod Coupling Nuts

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: toppros offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

10 x 12.7mm 1/2 Flexible Shaft Coupling Stepper Motor Coupler D25 L30

  • Zero backlash. One-piece metallic spring coupling. For little torque shaft connect..
  • Absorption of parallel, angular misalignments and shaft end-play by spring action..
  • Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required..
Check Stock

1/2\ to 1\ L095 Flexible 3-Piece L-Jaw Coupling Coupler Set & Rubber Spider

  • Zero backlash. One-piece metallic spring coupling. For little torque shaft connect..
  • Absorption of parallel, angular misalignments and shaft end-play by spring action..
  • Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required..
Check Stock

uxcell 2 Pcs 5mm to 4mm Aluminum Alloy Shaft Coupling Flexible Coupler L25xD20 Blue

  • Zero backlash. One-piece metallic spring coupling. For little torque shaft connect..
  • Absorption of parallel, angular misalignments and shaft end-play by spring action..
  • Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required..
Check Stock