Categories

Best Hex Shaft Pneumatic Coupling

2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【Package Include】Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw..
Check Stock

Sydien 4 Pcs 8mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector with Set Screws & Wrench

  • Metal: Fine plating metal, hardened by heat treatment, and then electroplated..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily..
  • Package: 4Pcs Flange Shaft Coupling + 1Pc Mini Hex Wrench + 10Pcs Fastening Screw..
Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

CENTAURUS 4Pcs Universal Motor Joint Shaft Coupling 4mm to 4mm with Screws

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade Universal Motor Joint Shaft Coupling 4mm to 4mm is 100% brand new,wearproof, durable and widely used for motor etc..
  • 【HIGH QUALITY】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is made of high quality wearproof steel material which can use for a long time..
  • 【WIDE APPLICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is widely used for shaft connection,produced based on International Flange Standard..
  • 【MAIN SPECIFICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm ,Inner Diameter: 4mm to 4mm. Outer Diameter is 9mm. Height is 23mm. Color: Silver.
  • 【PACKAGE & SERVICE】Package Include: 4Pcsx 4mm to 4mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

uxcell Flexible Extension Screwdriver Bit Holder Magnetic Extention Hex Shaft Screw Drill Connection Tip,6.7-inch Flex Shaft,1/4''-Hexagon Drill

  • Features -- Total Size: 170x13mm/6.7 x 0.51-inch(L*Max. Dia.).
  • Size -- Connection hex shank drill site size (6.35mm) (1/4) 0.25-inch.
  • Connecting parts of the batch Hex size (6.35mm) (1/4) 0.25-inch..
  • Material -- This flexible shaft is made of carbon steel and plastic which make it practical and durable..
  • Widely compatible -- This extension shaft is for Small wrench, cordless screwdriver, low speed DC hand drill, pneumatic screwdriver, torque drill, electric screwdriver..
  • Widely used -- Bends,twist and turns to use drill into tight and confined spaces. Suitable for ordinary hand drill and electric drill with perfect performance. Applied to hardware maintenance and repair, including computer chassis, electrical cabinets, furniture, electrical appliances, etc..
Check Stock

1/2-13X1 3/4 Hex Rod Coupling Nut 3/4 inch Across Flats Grade 5 Zinc (Pack of 5)

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: toppros offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

Star 1/2 HP Submersible Well Pump with Carbon Steel Shell (3 Wire) 4 Inch, 230 Volt, 10 GPM, 4H10G05301

  • 1/2HP 4 Inch submersible well pump with powder-coated and corrosion resistant carbon-steel shell and 1-1/4 Inch discharge that has a built-in check valve that is removable, internal, and positive-sealing.
  • Rated at 7 GPM water pumping capacity - Great for small homes, cottages and light water usage applications - requires a 4" (10 cm) minimum inside well diameter.
  • Quiet and economical operation with no priming required - Features a stainless steel motor shell and drive shaft for quiet operation and stainless steel hex drive shaft with one-piece stainless steel motor-to-shaft coupling.
  • NEMA standard 3 wire motor with ground wire - this 230 Volt well pump requires a control box (sold separately) and comes with a splice kit for completing all electrical connections.
  • 100% Factory Tested - Will pump water from 100 feet.
Check Stock

TOPPROS Pack of 4 M8 X 1.25-Pitch 40 mm Length Metric Hex Coupling Nut 304 Stainless Steel Rod Coupling Nuts

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: TOPPROS offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

TOPPROS Pack of 6 M8 X 1.25-Pitch 24mm Length Metric Hex Coupling Nut 304 Stainless Steel Rod Coupling Nuts

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: toppros offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

26Pcs Flexible Drill Bit Extension Set,Drill Bit Holder Extension,105° Right Angle Drill Attachmentt,1/4 3/8 1/2"Impact Driver Rotatable Socket Adapter,Bits Holder,Bendable Drill Bit Extension

  • ...quickly.The inner shaft has a wide rotation range and is stable in mass. As the shaft rotates inside, the flexible black sleeve protects your hand from damage and completes your job perfectly.2Pcs suit that is easy to replace. The Flexible Drill Bit Extension is compatible with a small wrench, cordless screwdriver, pneumatic screwdriver, torque drill, and electric screwdriver..
  • [Quick Release Magnetic Drill Bit Extension] ---- Include 3 x 1/4 Inch hex shank magnetic extension chuck adapter quick release bar socket screwdriver bit holders, the lengths of which are 60 mm/100 mm/150 mm respectively. Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended etc. Great tools for conversion and extension..
Check Stock

Heyiarbeit 5pcs 4mm to 4mm 2 Section Rotatable Universal Joint Coupling Shaft Stepper Motor L52xD12 U Joint Coupler Connector with Screw for RC Model Motor, RC Robot, DIY Encoder, CNC Machine

  • [Total Size] - Outer Diameter: 12mm / 0.47".
  • Connection Diameter: 4mm to 4mm / 0.16" to 0.16".
  • [Material] - This universal coupling is made of premium iron metal material, which is durable and has a long service life, fine workmanship.
  • [Feature] - The universal joint of the purpose is to firmly connect the driving shaft and the driven shaft to rotate together and transmit motion and torque, cost effective coupling design, which is very flexible and easy for use, and is great replacement for your old or broken one.
  • [Design] - Rotatable design. Allow the angle between the two axes within a limited range vary with operational needs, and easy to set up the items on the shaft and control the holding capacity of the coupling.
  • [Wide Application] - Universal joint coupling are used in servo motor systems, 3D printer, cnc machine, diy encoder, spindle transmissions, stepping motors, lifting platforms, machine tool transmissions, stepping motors, encoders, screw drives, machine platforms or gearboxes, etc.
  • Great suitable for short support shaft, bushing model, miniature Shaft, model airplane/ boat/ car.
Check Stock

TOPPROS Pack of 8 M6 X 1.0-Pitch 30mm Length Hex Width 10mm Metric Hex Coupling Nut 304 Stainless Steel Rod Coupling Nuts

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: toppros offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

10 x 12.7mm 1/2 Flexible Shaft Coupling Stepper Motor Coupler D25 L30

  • Zero backlash. One-piece metallic spring coupling. For little torque shaft connect..
  • Absorption of parallel, angular misalignments and shaft end-play by spring action..
  • Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required..
Check Stock