Categories

Best Hex Socket Wrenches

Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome

  • ... (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

APOLLO TOOLS 95 Piece Mechanics Tool Set with SAE and Metric Socket Sets and Mechanic Tools Needed for Boats Bikes Car Maintenance - DT1241,Gray

  • This 95 Piece Mechanics tool kit contains all the sockets, wrenches and pliers needed for small engine and other mechanical repairs such as replacing spark plugs, stripping wires, cleaning battery terminals etc. The tools are conveniently organized in a sturdy blow-molded case to avoid loss or damages in transport. This well-organized and self-contained with all the tools easy to find at a glance. The case is easy to transport and store..
  • METRIC AND SAE SOCKET SET: Be prepared for garage, workshop and household repairs with this set of the most reached for 1/4" and 3/8" Sockets and a selection of the most popular garage tools..
  • SOCKETS, WRENCHES & MORE: Contains the most popular sized sockets, wrenches and useful hand tools, including pliers, adjustable wrenches, ratcheting bit driver, SAE and metric hex keys, wire brush, wire stripper and more..
  • MOST NEEDED MECHANICS TOOLS: Including sockets, combination wrenches, hex keys, wire stripper, pliers, adjustable wrenches, tire gauge, voltage tester and more..
Check Stock

TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017

  • ... (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

DISEN 7 Piece 3/8\ Drive Extra Long Allen Wrench Hex Bit Socket Set with Portable Storage Case, Hex Head in Metric Size: 3-10mm, Chrome Vanadium Steel & S2 Alloy Steel

  • ...l Case】Each hex bit socket is tightly packed in a portable and well-packaged storage tool case, convenient for carrying. Sizes are stamped permanently on each socket so that you can easily get the size you need.
  • 【Precise Tightening】These must-have long shaft allen wrench sockets can be inserted into any torque wrenches or impact driver tightly and precisely with the chamfered bit ends. You can use them for auto repair, and household appliance maintenance.
  • 【Quality Guarantee】Each hex bit socket has been tested strictly to meet the industry standard of hardness, torque and surface. They are durable and should last for lifetime with normal use.
Check Stock

Milwaukee 48-32-5033 Power Drill Bit Extensions Shockwave Socket Adapter Set, 1/4\

  • ...gon shank bits.Apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces..
  • ☆☆ 3Pcs Colorful Socket adapter impact set - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket adapter set .Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
  • ☆☆ 1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • ☆☆ 1 Pack include 3 different most useful tools,used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool ..
Check Stock

BOXO USA Heavy Duty Toolbox 103 Piece MotoBox Tool Box with Locking System - Black

  • ...p pliers. 6" Long nose pliers. 7" Heavy-duty diagonal side cutter. 5-1/2" Scissors. 4" Flush cutter. 6-Piece 1/4" Drive screwdriver set (SL3, SL4, SL5.5, SL6.5, PH1 & PH2)..
  • 15-Piece Metric combination wrench set (6, 7, 8, 9, 10, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 27mm). 1/4" and 3/8" Drive 90-Tooth ratchet wrenches. 3-Piece 1/4" Drive socket extension bars (2", 4", 7" lengths). 2-Piece 3/8" Drive socket extension bar (4", 7" lengths). 1/2" Drive socket extension (3" length). 1/4" Drive Universal joint. 3/8" Drive to 1/4" Drive adapter. 3/8" Drive to 1/2" Drive adapter. 1/2" Drive Swivel handle (15" length)..
  • 7-Piece ¼” Drive hex bit and torx sockets (H3, H4, H5, H6, T15, T20, T25). 11-Piece 3/8" drive hex bit and torx sockets (H5, H8, H9, H10, H12, T27, T30, T40, T45, T50, T55). 2-Piece 1/2" Drive hex bit sockets (H14, H17). 7-Piece foldable hex key wrench set (1.5, 2, 2.5, 3, 4, 5, 6mm). 12" Engineers hammer. 5M SAE/Metric tape measure. Digital tire gauge. 9” Reversible wire twist pliers. 1/4" Drive slide T-handle. 4-Piece 3/8" drive slide T-handle. Spoke wrench (1, 3, 5 and 2, 4, 6)..
  • 3/8" Drive hex axle tool (17, 19, 22, 24mm). 10mm and 13mm Spoon wrench. 32mm Spoon wrench with 22mm and 27mm insert keys..
Check Stock

18 Pc SAE & Metric T-Handle Ball End Hex Key Set by USATNM

  • Forged from high-quality chrome vanadium steel, with advanced heat treatment process, our hex wrenches set is made to last with performance in anti-corrosion and rust resistance for your long time use..
  • Our allen key set is designed with a ball end to access socket cap screws up to a 25° entry angle, allowing easier access to those hard-to-reach places and making it easy for adjusting in all angles..
  • 27 pcs long arm ball end allen wrenches sets include: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8 inch.
  • 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm. Featuring the most common inch and metric allen wrenches set sizes, this allen wrenches sets can easily remove and install most socket cap screws found in cars, furniture, equipment and more..
  • Each allen key with heat treated & chrome plated also has a different highly visible color to make for easy distinction of different sizes. A textured slip resistant surface for an easy grip even with oily & dirty hands..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock

Park Multi-Tool 9-Function Tool, MT-1C

  • The MT-1 features 3mm, 4mm, 5mm, 6mm, and 8mm hex wrenches.
  • Each of the nine tools is carefully positioned so the MT-1 can be effectively used on those "tough to get to" nuts, bolts, and screws..
  • The tool is nominally 110mm long, 35mm wide, and 8mm thick..
Check Stock

CruzTOOLS EKH2 EconoKIT H2 Tool Kit for Harley-Davidson Motorcycles , black

  • Don't let the H2's diminutive stature deter you, because considerable capability is packed into a compact package, and at a budget price too.
  • The most common fasteners are covered with five combination wrenches, plus a stout 6-in-1 screwdriver, tire gauge, hex and star keys, 2-in-1 spark plug socket, and more.
  • Light weight and very compact for road-side repairs and quick adjustments.
  • Kit Contents: Combination Wrenches: 3/8, 7/16, 1/2, 9/16″, & 10mm, Hex Keys: 1/8, 5/32, 3/16, 1/4, 5/16″, Star Keys: T25, T27, T40, 6-in-1 Screwdriver, 5/8″ & 13/16” spark plug sockets, Cable Ties (5 pcs.), Mechanics Wire, Tire Pressure Gauge, Shop Towel & Heavy-duty zip-up pouch.
Check Stock

.050 Short Arm Hex Key L-Wrench 2 Pack (.050)

  • .050 x 1-3/4" Long Hexagon Drive Hex Key Wrenches.
  • Used to Tighten-Loosen Socket Head Screws Including Set, Button, Cap and Flat Bolts.
  • Made out of High Quality Heat Treated Black Alloy Steel..
  • You Will Receive 2 matching Hex Keys for Miniature Fasteners.
Check Stock

7Pcs Drill Adapter Impact Grade Power Hand Tools 1/4in Magnetic Socket Hex Shank Extension Rod Drill Adapter

  • Excellent Material: super heat-treated chrome vanadium steel, suitable for ordinary and impact drives, easy to use, light in weight, and can be quickly connected to standard hex nut drivers, impact hole saws, spade bits, etc..
  • Good Conversion Accessories: 3 different utility tools for installing hexagonal tools, such as pneumatic screwdrivers, electric screwdrivers, pneumatic drills and manual screwdrivers..
  • Compatible with Quick-change: 105°angle 1/4in hex bit adapter is compatible with quick-change, suitable for most electric drills, cordless drills, manual wrenches and screwdriver chucks..
  • Quick Release Rod: 1/4in hex handle magnetic extension chuck adapter quick release rod hex socket screwdriver drill chuck suitable for electric and pneumatic screwdrivers and other electric tools..
  • Color Adapter Kit: 3 pieces of color socket adapter impact kit includes 1/4 inch drive adapter, 3/8 inch drive adapter, 1/2 inch drive adapter..
Check Stock

HORUSDY Hex Bit Socket Set wich Case, 32-Piece Premium Hex Socket Set S2 Alloy Steel, SAE and Metric Set

  • Each hex bit is corrosion- and rust-resistant ,can replaces allen wrenches include hand wrenches and ratchet handles..
  • This set is easy to insert smoothly with precision chamfered bit ends.protect the bits and fasteners from damaged edges and stripping..
  • 32-Piece Allen socket set are made of S2 alloy Steel and chrome vanadium steel(CR-V) can increase torque and hardness..
  • This allen bits socket set comes with a convenient durable secure case for easy organization..
  • Widely use in auto repair,home tool and more..
Check Stock

Klein Tools 70591 Folding Hex Key Set, 9-Key, SAE Sizes & EKLIND 20511 Steel Handle Fold-up Hex Key allen wrench - 5pc set SAE Inch Sizes 3/16-3/8

  • Product 1: Folding Hex Keys with two key positions (straight-out or right angle) for extra leverage.
  • Product 1: Hex ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket.
  • Product 1: Handy sets fit in your pocket or tool box easily and help eliminate the lost key problem.
  • Product 1: Includes nine-key set sizes: 5/64-Inch, 3/32-Inch, 7/64-Inch, 1/8-Inch, 9/64-Inch, 5/32-Inch, 3/16-Inch, 7/32-Inch and 1/4-Inch.
  • Product 2: MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A..
  • Product 2: Contains INCH Sizes: 3/16, 7/32, 1/4 , 5/16, & 3/8.
  • Product 2: EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners.
  • Product 2: OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish.
Check Stock