Categories

Best Hex Stud Extractor

ARES 70016 - Damaged Bolt and Stud Extractor Tool - Grips and Removes 1/4-Inch to 1/2-Inch Studs - Ideal for Broken, Rounded Off, Painted Over, and Rusted Tight Bolts

  • ABOUT THE TOOL: This damaged bolt and stud extractor tool is 3/8-inch drive and can be used with manual or pneumatic impact wrenches and ratchets. The hexagonal flat can also be used with flat wrenches, adjustable wrenches, sockets, and locking pliers. Manufactured with high-grade Heat-Treated Alloy Steel for maximum durability, this tool also features a chrome finish for additional rust protection..
  • MULTIPLE USES: This bolt extractor will save hours of frustration on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, rusted tight bolts and more..
  • TRADITIONAL BOLT EXTRACTORS: Traditional bolt extractors force the user to guess which size the damaged stud is. They have a tendency to strip the screw even more and shave metal off without budging the screw, leaving you worse off than when you started. The design of this bolt extractor allows you to clamp down on the damaged stud, eliminating the guess work..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you ha....
Check Stock

8Pcs Screw Extractor Set, Easy Out Damaged Screw Extractor Kit, Bolt Water Pipe Remover Set, with Storage Case.

  • 8 piece Screw Extractor -can Easy Out Damaged Bolt Extractor Kit Stripped Broken Screw Remover Set, different sizes of screw extractor to meet different needs..
  • Screw Extractor Kit Made from carbon steel and are tempered twice for extra hardness and durability. Screw Extractor Works on wood and machine screws, as well as flat, hex, or painted over screws..
  • Remove Damaged Screws Bolts And Water Pipes – These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes..
  • Screw Extractor can remove some of the common screwdriver can not be disassembled, damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings..
  • Screw extractor size includes #1 for 1/8″-5/32″ , #2 for 5/32″-3/16″, #3 for 3/16″-1/4″, #4 for 1/4″-5/16″, #5 for 5/16″-7/16″, #6 for 7/16″-9/16″, 7# for9/16″-3/4″, 8# for 3/4″-1″..
Check Stock

BTSHUB 8pcs Damaged and Stripped Screw Extractor Set, Broken Bolt Extractor & Broken Water Pipe Remover Set

  • ☂FUNCTION: These extractors will easily and quickly remove most kinds of damaged, stripped, rusted, broken, or stuck screws, bolts from any wood or metal surface. The new two water pipe extractors, designed for the broken water pipes..
  • ☂RELIABLE QUALITY: Made from carbon steel and are tempered twice for extra hardness and durability. Black oxide finished for durability. It is rustproof and sturdy. Works on wood and machine screws, as well as flat, hex, or painted over screws..
  • ☂THREAD DESIGN: The damaged screw extractor is designed with deep and wide threads for longer service life. 8 screw extractor size includes #1 for 1/8″-5/32″.
  • ☂STORAGE CASE: The broken screw extractor set comes with a durable box to keep these extractors organized, clean, secure, and easy to find..
  • ☂SCREW REMOVING TOOL: 8-piece heavy-duty steel extractor，different sizes of screw extractor to meet different needs. The extractor set is an ideal screw removing tool for household use and professional electrician..
Check Stock

ACROTOL 26 Pieces Bolt Extractor Set, Spiral Screw Extractor Set and Drill Bits, Extraction Socket Set for Removing Damaged, Rusted, Rounded Bolts, Nuts and Screws

  • [Specifications] 26 PCS Screw&Bolt Extractors/Drill Bit Set includes 6 easy out style spiral flute extractors, 13 PCS bolt&nut extractors, 1 PC 1/4" hex adapter and 6 PCS drill bits..
  • [Size] Nut&Bolt Extractor Size: 1/4inch, 5/16inch (8mm), 3/8 inch, 10mm, 7/16 inch (11mm), 12mm, 1/2inch, 13mm, 9/16inch (14mm), 5/8 inch (16mm), 17mm, 11/16 inch, 3/4 inch (19mm), included 3/8"-1/4" hex adapter. Spiral Flute Extractors Size: 1#, 2#, 3#, 4#, 5#, 6#. Drill Bits Size: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8"..
  • [Material] Every screw & bolt extractor is made from high hardness chrome-molybdenum steel, the cobalt drill bit is made from HHS..
  • [Note] Cobalt drill bits should not used for stainless steel. The bolt extractor with unique plum-shaped internal thread design provides excellent torque and can be used to rotate fasteners with deep bolts..
  • [Function] Spiral flute extractors are perfect for common fasteners, the bolt extractors are for freeing partly-exposed fasteners. The kit also includes right hand cobalt drill bits for fasteners, which can be used to help drill these fasteners..
Check Stock

Hanson 53205 Extractor 1/4 Multi Spline for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors are ideal for high-torque applications.
  • Each IRWIN screw extractor has an aggressive left-hand spiral design for extra gripping power.
Check Stock

Werkzeug Damaged Stripped Screw Extractor Set for Broken Screw, All-Purpose HSS Broken Bolt Extractor Screw Remover Set with Magnetic Extension Bit Holder & Socket Adapter (22 PCS )

  • Damaged Screw ExtractorWerkzeug screw extractor is made of high quality High-Speed Steel 4241. High hardness, durable and easily remove damaged screws.
  • In one stepThe stripped screw extractor set is included two extension bit holder. Can remove in one step, do not need to conversion the extractor or adjust the chuck.
  • Extremely VersatileThe stripped screw extractor kit is includes 20 pieces of stripped screw extractor in 10 different sizes to satisfy all you demand. Suitable for any sizes screw or bolt.
  • MultipurposeSuitable for allen bolts, machine screws, lag bolts, wood screws, hex bolts, sheet metal screws and other screws.
  • ImportantIt is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use!.
Check Stock

Lisle 68500 Manifold Drill Template for Ford 2V & 3V

  • Interchangeable plates and alignment pins ensure drill is centered on the broken stud.
  • Depth gauge for drilling is marked on the template. Designed to remove broken exhaust manifold studs on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford Triton engines without damaging the cylinder head..
  • The stripped screw extractor is then used to remove the broken stud.
Check Stock

[Gulfcoast Robotics] HEX EPCOS Thermistor Upgrade for Creality Ender 3 Ender 5 CR10 3D Printers 1 Meter Extension Cable

  • EPCOS Thermistors are the ideal choice for the official Creality firmware. Provides more accurate temperature readings than traditional 100K NTC3950....
  • Creality 1M extension cable includes a 2-pin JST-XH connector that mates perfectly with the board..
  • Fiberglass insulated leads and brass hex stud provide safe usage at high temperatures up to 300° Celsius..
  • M3x0.5 HEX stud threads in to the heater block for quick, secure installation..
  • Silicone insulation ring shields the brass stud from external airflow (e.g. ceiling fans) for stable temperature readings..
Check Stock

Hanson 52207 Screw Ext Multi Spline 5/16 for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors are ideal for high-torque applications.
  • Each IRWIN screw extractor has an aggressive left-hand spiral design for extra gripping power.
  • 5/16-inch recommended drill bit diameter.
  • 1/2" hex head and 9/16" bolt diameter.Item # 53225 shown.
Check Stock

Powerbuilt 12 Volt Lug Nut Impact Wrench 2 Sockets, Cigarette Lighter Plug with Carry Case, LED Light for Night - 240067

  • ⚙️⚙️⚙️Drill bit is made of cobalt, nut and screw extractor kit is made of high-hardness chromium-molybdenum steel material, and the reverse spiral groove is designed to buckle downward to provide maximum grip..
  • The extractor kit is a 3-in-1 screw & nut removal kit and drill bit kit. Whether it‘s for car maintenance or daily use, it can provide you with great convenience..
  • Nut extractor Size: 1/4 inch, 5/16 inch (8 mm), 3/8 inch, 10 mm, 7/16 inch (11 mm), 12 mm, 1/2 inch, 13 mm, 9/16 inch (14 mm), 5/8 inch (16 mm), 17 mm, 11/16 inch, 3/4 inch (19 mm), included 3/8" to 1/4 "hex Impact adapter..
  • ️️️Screw extractor and drill bit kit Easy out rusty or damaged screws. Screw extractor kit:1-6#, Drill bit kit: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8", each precision tool has a clear mark..
  • XEWEA promises that customers can enjoy our friendly customer service (just send us an email via Amazon), and a free warranty within 90 days. If you have any questions, please contact us..
Check Stock

2 Packs Thumb Stud for Buck 110 Folding Knife, Universal Replacement Thumb Button for Folding Hunting Knives Blade Thickness 2.5mm to 3mm, with Hex Wrench (Black)

  • 2 Packs Thumb Stud for Buck 110 Folding Knife, Universal Replacement Thumb Button for Folding Hunting Knives Blade Thickness 2.5mm to 3mm, with Hex Wrench (Black).
  • [WHAT YOU GET] - You will get 2 Packs Thumb Studs, completed with 1/16" Hex Key Wrench. Color: Black..
  • [DURABLE AND STURDY] - Made of brass and Hardened stainless steel, durable and sturdy for long time usage..
  • [EASY TO INSTALL] – Completed with hex wrench, the replacement thumb buttons can be easily screwed on to most any folder knife blade..
  • [COMPATIBILITY] – The great replacement thumb studs fit for Buck 110 Knife and most any folder knife blade thickness ranges from 0.1" to 0.118" (2.5mm to 3mm)..
  • [GREAT REPLACEMENT THUMB STUD] – The thumb stud 0.40" long and 0.28" Dia with .130" blade slot. The useful EDC gadgets can help you to use your knife more comfortable and safely..
Check Stock

Solary Aluminum Weld Stud Weld Studs CD Type Weld Stud Capacitor Discharge CD Stud 1 Set for Welding Bolt Plate Insulationnail Spot Welders

  • ①Appartus for aluminum stud -Raw Material:Copper. -Length:65mm..
  • ②Aluminum stud connector -Raw Material:Aluminum . -Length:60mm..
  • ③Aluminum stud -Raw Material:Aluminum . -Length:15mm..
  • ④Dent pulling hook -Raw Material:iron. -Length:77mm. -Weight:about 41g..
  • ⑤Welding Extractor -Raw Material:Copper. -Size:L50*W50mm. -Weight:about 60g..
Check Stock

Damaged Screw Extractor Set, 12Pcs Screw Extractor Kit, Easy Out Bolt Extractor Set and Drill Bits Guide Set for for Broken Bolts Removing Hand Tools, 4-25mm(1/8-1") Broken Screws

  • Damaged Screw Extractor: These extractors kit will remove most kinds of damaged, rusted, broken or stuck screws from any wood or metal surface. The easy-to-remove extractor set is made from premium steel, high temperature quenching, surface anti-rust treatment, strong and durable. Easily remove damaged or broken screws, bolts, studs, threaded pipe fittings and so on..
Check Stock