Categories

Best Hexacopter Power Distribution Board

PCB007 1X 12 Position Power Distribution Board 2 Inputs 2 x 13 Outputs for DC AC Voltage New

  • 100% Brand new and high quality.Perfect for Railway & Building Layout!This distribution is the ideal solution for the model train to supply all lighting..
  • Operation with DC/AC or digital current.2 input terminals.24 + 2 output terminals..
  • Layout Wire and Lighting.For use with your scale model railroad..
  • Brand:evemodel.Size:Approx.9.5cm or 3.74inch(L),1.87cm or 0.74inch(W)Max. Current via individual outputs: 10 A (observe total current).Max. External operating voltage: 24 V ~ / –.
  • Package included:1 Set Power Distribution Board..
Check Stock

Matek PDB-HEX X Class 12S PDB Power Distribution Board Supports 6~60V DC Input 5A Regulator with 5V/9V/12V outputs 264A Current Sense for FPV Quadcopter hexacopter Long Range Drone

  • This PDB-HEX is designed with X class hexacopter in mind, you can also use it with quadcopter, supports 6~60V DC (2~12S LiPo) input, 5A regulator with....
  • PDB/current sense resistor: 140A cont, 264A burst. ESC power pads: 60A cont. 100A burst.
  • 6x ESC power /signal/ telemetry pads . Current Senor: 264A, 3.3V ADC. Current Scale 125(INAV/BF), BATT_AMP_PERVLT 80 (ArduPilot).
  • Vx= 5V by default, Continuous 5 Amps. Bridge 9V jumper, Vx= 9V, Continuous 4 Amps, Max.5A. Bridge 12V jumper, Vx= 12V, Continuous 4 Amps, Max.5A..
Check Stock

Martian Mini PDB Power Distribution Board for Martian I II III Frame Kit

  • Item name: power distribution board Colour: Red.
  • Weight: 9.2 g Suit for Martian 190 mm / 230 mm / 255 mm Frame Kit.
Check Stock

8112 IPE 100KV V1.0 Silver MAD COMPONENTS Drone brushless Motor Multirotor Quadcopter Hexrcopter RC DIY Hobby

  • The MAD 8112 IPE is designed to carry payloads of 4000~5000g, with a 28-30 “carbon propeller, with max thrust is 11.6kg and motor weight of 380g.MAD 8112 IPE is a multi-rotor brushless motor for agricultural plant protection and professional aerial photography applications.With large load, high efficiency and excellent reliability.
  • The unique built-in “fan” design makes the airflow flow faster and heat dissipation faster.Druable bigger EZO bearing,more stable rotation..
  • .With Ultralight FLUXER-pro28*9.2in-D10-D20(M3*4) -Matt, flight time increased by 5~10.
  • Unique motor design, 36N40P multi groove multi stage.Take-off weight of frame:12S with 28inch prop:Quacopter16kg,Hexacopter-24Kg,Octcopter-32kg.
  • Max Power:2060W, Max thrust:11.6kg, Max torque:5.3N.m,Wire:extended wire 150mm,motor weight:380g,Recommend ESC:80A(5S-14S)..
Check Stock

M50C35 EEE 34KV MAD COMPONENTS brushless Motor for UAV Transportation Heavy Drone and Urban Air Mobility,UAM and Multirotor Quadcopter Hexrcopte RC DIY Hobby

  • The M50C35 EEE is designed to handle cargo transportation, emergency rescue and manned space programs, as well as heavy lift projects paramotor and industrial applications..
  • Unique motor core design, multi-slot multi-level architecture. Recommended take-off weight: With fluxer 60x20inch prop Quacopter 200kg,hexacopter 300kg,Octcopter-400kg.
  • Built in centrifugal air cooling system and efficient heat dissipation array design.
  • Designed for agricultural plant protection and professional grade applicationspressure..
  • Max Power:25000W,Max Thrust:95-100kg,Max Torque:60N.m, Recommend ESC: MAD AMPX 200A 24s.
Check Stock

Electronics-Salon Panel Mount 10 Position Power Distribution Fuse Module Board, for AC/DC 5~32V

  • Panel Mount Power Distribution Fuse Module Board..
  • Work voltage: AC or DC 5~32V, total current rating 40Amp. Dimensions: 150mm x 72.5mm x 29mm (W x L x H)..
Check Stock

K2 Alchemist Wide Mens Snowboard 159cm (W)

  • ...r warranty, the S1 Core is made from three renewable species of timber - Bamboo, Aspen, and Paulownia. Aspen and Bamboo work together to highlight the snap and response of this wood and a Bamboo-dominant underfoot section at 30° to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge. We’ve also placed lightweight paulownia in the tip and tail to help to reduce swing weight..
  • Spectral Braid - An integrated carbon weave that runs the entire length of the board, intersecting at 90º angles in the tip and tail for adding torsional rigidity and responsiveness and a more relaxed angle between the inserts for handling and maneuverability..
  • SpaceGlass Tip - A pre-cured fiberglass insert placed in the board's tip to reduce swing weight and add durability and maneuverability..
  • Recess3D - By reducing the number of materials in low-stress zones, we’re able to minimize the swing weight of your snowboard while also reducing chatter in the tip and tail - all without sacrificing strength..
  • Carbon Power Fork - A pre-cambered carbon inlay in the tail of your snowboard gives the board energy in and out of turns and adds extra pop for takeoffs and landings..
Check Stock

Power Distribution Block, Auto Car Audio Amplifier 1 in 4 Ways 0/2/4 Gauge in 4/8/10 Gauge Out Fuse Holder Circuit Protector Distribution Connecting Blocks

  • Distribution Block Input: 2GA*1, Outputs: 4GA*2 Wire.
  • Car audio distribution block, Impact Resistant Snap-on Plastic Cover, made Of High Strength, Nonperishable Industrial-grade Plastic.
  • High performance amp power distribution block,Low-resistance, high-current ability.
  • Amplifier Distribution block, suitable for auto car, boat or other vehicles, protect your vehicle's audio's system.
  • Power distribution block, run up to three 4-Gauge or 8-Gauge wires to your amplifiers. Power Distribution Block, can also be used to combine the ground wires of multiple amplifiers to a single grounding point.
Check Stock

K2 Excavator Mens Snowboard 154cm

  • S1 Core - Lightweight, snappy, and durable, our A1 Core is made from three renewable species of timber - Bamboo, Aspen, and Paulownia. Aspen-dominant to highlight the snap and response of this wood, we’ve combined it with Bamboo at 30 ° underfoot to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge..
  • ICG 10 Biax Carbon Glass - Integrating Carbon Fiber stringers that run the length of the board into our fiberglass increases the snap of the snowboard without adding unnecessary rigidity..
  • SnoPhobic Top Sheet - This top sheet material sheds unwanted snow build-up, keeping your snowboard light and nimble..
  • Carbon Power Fork - A pre-cambered carbon inlay in the tail of your snowboard gives the board energy in and out of turns and adds extra pop for takeoffs and landings..
  • Hybritech Sidewall Construction - A K2 exclusive. By transitioning from a P-Tex sidewall into a capped construction in the tip and tail of our snowboards, we can reduce waste while giving our snowboards better energy transfer and making them more durable than our competitors..
Check Stock

UNIROI Raspberry Pi RAB Holder Breadboard Kit with 830 Points solderless Circuit Board Raspberry Pi Holder for Arduino, Mega 2560 & Raspberry Pi 4B, 3B+, 3B, 2B and 1B+, A+ (52 Items)

  • This 14 in 1 RAB Holder kit is designed by for the Raspberry Pi and Arduino hobbyists, the holder is large enough for a Raspberry Pi 4B/ 3B/ 2B/ 1B+/ Zero/ Zero W, Arduino 328P Control Board or Mega 2560, and a 400 hole or 830 hole Circuit Board breadboard.
  • Including RPi GPIO Breakout Expansion Board and Ribbon Cable, which are special for Raspberry Pi 3 Model B, 2 Model B, 1 Model B+ and zero/ zero W..
  • This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails..
  • Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs (three for each color), ten 1k resistors, a screwdriver, and some screws..
  • Gift: GPIO 40 pin Table Card for wiring Pi and BCM codes for all RPI motherboard..
Check Stock

Tripp Lite Basic PDU, 30A, 20 Outlets (16 C13 & 4 C19), 200/208/240V, L6-30P Input, 15' Cord, 1U Rack-Mount Power, 5 Year Warranty (PDU1230)

  • Single phase PDU: safe, reliable power distribution unit delivers 200/208/240V single-phase AC power to multiple loads from a utility outlet, generator or UPS system in a high-density it environment. Ideal no-frills basic PDU for networking, telecom, security, PDU networking, and audio/video applications.
  • 20 outlet power distribution: The PDU features 20 total outlets rear C13, four front C13 and four front C19. The NEMA L6-30P input Plug with long 15-foot (4.5 M) cord connects to your facility’s compatible AC power source, generator or protected ups to distribute power to connected equipment. Pdu offers 208/240 volts AC, 30a maximum input current.
  • Switchless design: the switchless design prevents an accidental shutdown, which could lead to costly downtime. Built-in circuit breakers protect connected equipment from dangerous overloads.
  • 1U metal Housing: reversible all-metal housing faces front or rear in rack. Power distribution unit mounts horizontally in 1U of EIA-standard 19 in. 2- and 4-post racks, as well as on a wall or workbench or under a counter. Also known as - PDU power strip, power distribution unit rack mount, basic rack PDU, PDU 30a, rack mount PDU and power distribution unit 19 rack mount.
  • 5 year warranty & FREE tech support: Tripp Lite ....
Check Stock

REC S550 DIY Hexacopter Drone Development kit (Value Pack)

  • Tarot FY690S Full Carbon Aircraft Frame 3K Folding Hexacopter 690mm FPV TL68C01: Uses Toray carbon fiber 3K woven CFRP plate and 3K carbon fiber hollow tubes of pure carbon fiber ( non- 3K glassy carbon tubes ) full CNC machining . Design standards higher than similar products , the entire chassis weighs only 600 grams . S version with ?16MM new multi-axle motor mounts, new brushless ESC bit back , can be directly tied to use..
  • PX4 PIX 2.4.8 Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD: - Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system.
  • - Integrated backup power supply and failure backup controller.
  • redundant power input and fault transfer function.
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model.   3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.   Expansion feedbac....
Check Stock

WANGKUN GT-U7 GPS Module Navigation Satellite Positioning Compatible GY-NEO6MV2 NEO-6M 51 Single chip microcomputer STM32 for Arduino

  • 1. size 27.6x26.6 can be straight in or choose patch (with positioning hole).
  • 2. working voltage: 3.6V-5V (or direct USB power supply).
  • 3. work baud rate: 9600 (self modification).
  • 4., with IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
Check Stock