Categories

Best Hidden Deck Board Fasteners

304 Stainless Steel Start Clips Black Deck Clips Universal Decking Clips with Decking Screws for Composite Deck Boards, Hidden Fasteners (40)

  • Stainless Steel Material: starter clips are made of quality 304 stainless steel, strong texture, corrosion resistance, not easy to fade or break, suitable for outdoor installation, can play a nice fastening effect, to provide you with long term service.
  • Use Occasion: composite decking starter clips are applied to install composite decking with grooves on the sides, which conceal themselves while holding the deck in place, making them practical and attractive.
  • Installation Method: place the hidden deck fasteners for composite on the floor joists and fix them with screws, one every 12 to 16 inches, then push the floor into the card, easy to apply, will not waste a lot of your time and effort.
  • Rich Quantity to Meet Your Needs: the package includes 40 pieces of hidden deck clips, plenty quantity to meet your use demands, replacement demands and sharing demands, can give you a nice shopping experience.
  • Equipped with Screws: each starter clips for composite decking comes with a suitable stainless steel screw, easy to install, which can save you the trouble of buying screws and bring you a nice use experience.
Check Stock

Plastic Deck Clips Pack of 30 | Universal Plastic Decking Fasteners & Metal Deck Screws | Deck Clips for Composite Decking Boards | Plastic T Clips for Decking | Universal Deck Fastener Clips System

  • WHAT’S INCLUDED- Each order includes 30 plastic deck T clips, 30 stainless steel deck screws, 1 square install bit, as well as detailed installation instructions..
  • EASILY INSTALLED - These fastening porch deck clips allow for the installation to be done above the wood decking framework and installs in a variety of grooved composite deck boards. Instructions for installing these hidden fastener clips are included..
  • PROFESSIONAL RESULTS- These plastic deck t clips help achieve a seamless, fastener-free composite decking making them the best universal decking fasteners available. The stainless steel deck screw are set in the fastener for easier installation..
  • CONTRACTOR, COMMERCIAL & LARGE PROJECTS WELCOMED- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

Tiger Claw Pneumatic Installation Gun for Grooved Decking

  • Works with TC-G and Azek/TimberTech CONCEALoc.
  • Pneumatic gun installs 6 hidden deck fasteners in 26 seconds.
  • Saves time and provides a quality installation.
Check Stock

Titan 4x4 Galvanized Post Anchor Kit with Metal Black Post Skirt - 12pack

  • Amazing finished appearance with anchor hidden deep inside post.
  • Fast and easy installation on any surface-No notching deck boards.
  • Tested and approved against AC273 for use with US residential wood guard rails.
  • Includes all required galvanized fasteners and post skirts.
Check Stock

Titan 4x4 Galvanized Post Anchor Kit with Metal Black Post Skirt - 8pack

  • Amazing finished appearance with anchor hidden deep inside post.
  • Fast and easy installation on any surface-No notching deck boards.
  • Tested and approved against AC273 for use with US residential wood guard rails.
  • Includes all required galvanized fasteners and post skirts.
Check Stock

Titan 4x4 Galvanized Post Anchor Kit with Metal Black Post Skirt - 4pack

  • Amazing finished appearance with anchor hidden deep inside post.
  • Fast and easy installation on any surface-No notching deck boards.
  • Posts are higher and drier for longer life.
  • Tested and approved against AC273 for use with US residential wood guard rails.
  • Includes all required galvanized fasteners and post skirts.
Check Stock

Tool Deck Fastener Pro Edge

  • For installation of treated wood decking and other softwood lumber.
  • No-gap spacing or can be used with spacers for any size gap.
Check Stock

FastenMaster Cortex 2-1/2 Fastening System for Trex Decking - 100 Linear Feet - Trex Select Saddle

  • Cortex for 'Trex' hidden fastening system is the fastest, easiest way to hide the heads of your deck screws on the market.
  • Cortex offers a strong connection between the deck board and the joist.
  • One kit does 100 sq ft at 16" o.c. (includes: 350 screws, 400 plugs and 3 setting tools).
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ...“C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ...“C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Deck Demon Wrecking Bar - 44 Inch Steel Deck Board Remover Tool - Save Time Removing Old Boards and Breaking Pallets - Heavy Duty, Non-Slip Handle with Dual Claw Head Nail Puller - Red, DD-201

  • Heavy Duty Demolition & Renovation Tool - Deck Demon is a versatile long handled steel deck pry bar with a dual tine crowbar head to efficiently remove boards, decking, siding, roof, strapping, fasteners, and nails without kneeling or straining your back.
  • Increase Your Efficiency - the breaker bar pry tool features a 44-inch handle with a padded non-slip grip (no gloves necessary) to help reduce your time and labor invested in deconstructing and renovating home improvement projects from a comfortable standing position.
  • Maximum Leverage - this pallet breaker tool straddles the stud/floor joist/beam as a fulcrum point and provides a more stable position for prying to make board splitting more like paper splitting. Great to use as roofing tools, flooring tools.
  • Dual-Claw Head - Deck Demon’s dual-claw head is designed to fit over single and double joists and features 2 beveled cats paw nail puller slots, for removing nails and screws. The patented rocker design removes decking without damaging the joists.
  • Wood Working Tools And Equipment - solid steel, commercial grade demolition....
Check Stock

Adjustable Bed Sheet Straps Suspenders Heavy Duty Elastic Sheets Band Holder Straps Long Fasteners for Twin Full King Queen Size Beds Mattress Pad Covers (Pack of 4 Pcs)

  • Sheet Band Straps Suspenders White Adjustable Bed Corner Holder Elastic Fasteners Clips Grippers Mattress Pad Cover Fitted Sheet. Width: 2cm/0.79inch Length: 18cm-38cm/7.09inch-14.96inch.
  • Our Sheet Straps fits with fitted sheet and flat sheet, Adjustable length allows desired tension. The newest and hottest product being used for keeping sheets tight all night long.
  • Great For Bed Sheets and Mattress Covers.
  • fitted sheet holder,bed sheet holder straps,bed sheet corner clips grippers straps,adjustable elastic sheet straps grippers,sheet fasteners.
  • CLIPS - Heavy Clips with rounded plastic teeth insert to ensure maximum hold and prevent damage to your fabric, Sturdy metal Adjusters will not fall apart. ELASTIC – Elastic is 100% Woven Polyester, will never lose its stretch and shape, the Elastic is ultra-tough to retain its elasticity use after use, and stretchable to conform comfortably..
  • Our high-quality Bed Sheet Fastener Secures your bed sheet while it’s still hidden from view, prevent uncomfortable sleeping and perform High quality freedom of movement. Works for all beds types queen, king, tw....
Check Stock

They Sold Their Souls for Rock and Roll (3-HR Version)

  • Conceals fasteners for the entire deck, including first and last boards, perimeter and stairs.
  • Each box includes (350) screws, (400) plugs and (3) set screws.
  • Plugs are made from OEM brand name deck boards, ensuring plugs match the decking.
  • Strong connection between deck boards and joists.
Check Stock