Categories

Best Hidden Deck Screw Clips

Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ...“C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ...“C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

TigerClaw Phillips Flat Head Black Oxide Stainless Steel Scrails Collated Fasteners 930 per box

  • The fastest all stainless hidden deck fastener system.
  • Coated black to blend screw into black clips.
  • Stainless steel for extreme environments.
Check Stock

Topdex Hidden Deck Fasteners - Strong Plastic Clips with Stainless Steel Screws Inserts 0.19' Gap Spacing Between Wood Flooring Boards - Outdoor Decking Hardware, (90 Clips - 50 sqft)

  • A Sleek-Looking Deck – Build your decking like a pro with the help of these plastic fasteners. These flooring spacers let you mount your boards to the joists while keeping the screws hidden from sight..
  • Consistent Gap Spacing – Maintain the streamlined look of your decking and balcony flooring with these clips. Each plastic clip is designed to create a 0.19″ gap in between your terrace boards..
  • Easy Installation – Save time, effort, and energy in building your deck. To mount, just insert the clip into the side groove of your decking board, drive the screw with your drill, and you’re all set..
  • Crafted To Last – The last thing you need are decking clips that easily break. Our clips are made of tough plastic, while the screws are made of stainless steel that withstands rust or corrosion..
  • Decking Tools With Unbeatable Value – Get the most out of your money whenever you purchase our decking fastener clips. Each pack comes with plastic fasteners and stainless steel mounting screws..
Check Stock

Deck Clips Pack of 36 | Grooved Decking Clips and Deck Screws | Deck Starter Clips for Composite Deck Boards | Universal Starter Deck Clips with Decking Screws

  • EASILY INSTALLS- These starter clips are used for the perimeter deck boards and easily install in grooved composite decking boards. Place one at the center edge of every joist 12"-16" apart..
  • THE PERFECT WAY TO DECKING- These hidden deck clips install below deck and help decking stay in place, without all the drill marks in your boards!.
  • WHAT’S INCLUDED- Purchase includes 36 deck screws, drive bit, and 36 deck clips..
  • CONTRACTORS- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

DeckWise (Black) Ipe Clip EXTREMEKD Hidden Deck Fasteners, 1/4' Spacing, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of KD Hardwood, Thermal or Composite Decks (1050 Bucket)

  • Kit includes 1050 BLACK hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32' Spacing, Includes Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of AD Hardwood or Thermal Wood Decks (1050 Bucket)

  • Kit includes 1050 BROWN hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32\ Spacing, Includes Stainless Steel Black #8x2\ Trim-Head Screws for 300 Sq. Ft. of AD Hardwood or Thermal Wood Decks (525 Bucket)

  • Kit includes 525 BROWN hidden deck clips, 570 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 525 count kits will fasten 300 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

GRK RSS3810HP RSS HandyPak 3/8 by 10-Inch Structural Screws, 50 Screws per Package

  • Creates a 3/16-inch gap between deck boards.
  • Each deck clip on the TurboClip stick comes preloaded with a stainless steel screw.
  • Simply insert the TurboClip into the side groove of your decking board, drive the preloaded screw through the TurboClip and into your deck support, then snap off the remaining TurboClip stick.
  • Cut your deck board installation time by up to 60-percent, saving you valuable hours and money.
Check Stock

WoodPro Fasteners ST516X4B 5/16-Inch by 4-Inch Length Round Washer Head Exterior Wood Screws, 250-Pack , Gold

  • Creates a 1/4″ Gap between deck boards..
  • Each deck clip on the TurboClip stick comes preloaded with a stainless steel screw.
  • Simply insert the TurboClip into the side groove of your decking board, drive the preloaded screw through the TurboClip and into your deck support, then snap off the remaining TurboClip stick.
  • Cut your deck board installation time by up to 60% - saving you valuable hours and money.
Check Stock

Flower Pot Clips Plant Pot Latch Klips Plant Hangers Hooks 12 Pcs Hard Steel Durable Klips for Holds 5' to 8' Terra Cotta Clay Flower Pot Garden Decorate -Silver

  • ✔ PREMIUM QUALITY - Rust resistant, heavy duty steel construction,1.5MM Thick Strong Hard Galvanized Steel, max load up to 20KG.(The most reasonable test value)..
  • ✔ Size - Each clip is about 2" H x 7/8" W.
  • Each screw is about 1" long. Mini Sized, but worked great by hidden behind the pot after installation. By holding 5” to 8” clay pots, terra cotta plant pots, the pots should have similar lips as shown in the pictures..
  • ✔ Easily Installed: Each clip comes with a strong screw, hand screw or use a power drill to install into wood fence or tree..
  • ✔ MULTIPURPOSE - Decoration Home With Green Life. Great to hang flower pots in garden, fence, walls, brick, backyard. Decorate the garden create a real comfortable area..
  • ✔EASY INSTALLATION - Use a screw driver or power drill to screw the clips, hang the pot on the clip.Clips Measure 2" x 2" x 1",large and strong enough to hold pots in place,securely holds pots..
Check Stock

Quick Screw Gutter Hangers 5 Inch- 50 Pack - 5 Inch Gutter Clips with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

  • 5" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 5-inch aluminum (non-plastic) gutters..
  • FIX SAGGING GUTTERS & LOW SPOTS - Use our 5 inch gutter clips to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
  • HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
  • EASY INSTALLATION W/ NUT DRIVER - Install the 5 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
  • INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. The....
Check Stock