Categories

Best Hidden Deck Screw System

Plastic Deck Clips Pack of 30 | Universal Plastic Decking Fasteners & Metal Deck Screws | Deck Clips for Composite Decking Boards | Plastic T Clips for Decking | Universal Deck Fastener Clips System

  • WHAT’S INCLUDED- Each order includes 30 plastic deck T clips, 30 stainless steel deck screws, 1 square install bit, as well as detailed installation instructions..
  • EASILY INSTALLED - These fastening porch deck clips allow for the installation to be done above the wood decking framework and installs in a variety of grooved composite deck boards. Instructions for installing these hidden fastener clips are included..
  • PROFESSIONAL RESULTS- These plastic deck t clips help achieve a seamless, fastener-free composite decking making them the best universal decking fasteners available. The stainless steel deck screw are set in the fastener for easier installation..
  • CONTRACTOR, COMMERCIAL & LARGE PROJECTS WELCOMED- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

NATIONAL NAIL 345001 Marksman Pro Tool

  • Tool used in conjunction with screws and bit.
  • Provides a low cost, fastener free deck surface.
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ...“C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ...“C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

FastenMaster Cortex 2-1/2 Fastening System for Trex Decking - 100 Linear Feet - Trex Select Saddle

  • Cortex for 'Trex' hidden fastening system is the fastest, easiest way to hide the heads of your deck screws on the market.
  • Cortex offers a strong connection between the deck board and the joist.
  • One kit does 100 sq ft at 16" o.c. (includes: 350 screws, 400 plugs and 3 setting tools).
Check Stock

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Include, DM50

  • ...Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier..
  • This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer..
  • Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4).
  • if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended..
  • The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable railing system usually includes 1/8" lag screw DM60, 1/8" steel cable and cutter DW40, hydraulic Crimper DC01.For angle stair railing, drill jig DG12.....
Check Stock

DeckWise (Black) Ipe Clip EXTREMEKD Hidden Deck Fasteners, 1/4' Spacing, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of KD Hardwood, Thermal or Composite Decks (1050 Bucket)

  • Kit includes 1050 BLACK hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32' Spacing, Includes Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of AD Hardwood or Thermal Wood Decks (1050 Bucket)

  • Kit includes 1050 BROWN hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32\ Spacing, Includes Stainless Steel Black #8x2\ Trim-Head Screws for 300 Sq. Ft. of AD Hardwood or Thermal Wood Decks (525 Bucket)

  • Kit includes 525 BROWN hidden deck clips, 570 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 525 count kits will fasten 300 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Muzata 2Pack Weldless L-Shape Handrail Connector high Strength POM Black Internal Spline for 90° Corner Rectangle Stainless Steel&Aluminum Top Rail Cable Railing System HA02 BNP, HC1 HR0

  • ...andrail connectors are weldless for easy installation. You only need to screw in the bolt after putting the connector into the handrail. Perfect for DIY a handrail system on stair, deck, balcony and porch as well as indoor and outdoor places where a handrail system is needed..
  • CUSTOM DESIGNED- These connectors, hidden inside the handrails for a pretty appearance, will play the role of connecting and supporting the handrails where they are connected. This connector is custom designed for MUZATA rectangle handrails. For other handrail connectors, please search MUATA HA01 (rectangle handrail connector)..
  • MATERIAL-This handrail connector is made of high-strength POM which has high mechanical strength, rigidity, good dimensional stability, excellent wear-resistance and environmental protection. These excellent characteristics make this connector suitable for long-term outdoor use.These handrail connectors can be cut into any length and shapes to meet your demand. If you need handrail,Please search for MUZATA HT10 ..
  • NiceView System - We pre-designed a NiceView cable railing system to help you get a fully customized project. The system includes posts brushed PS01 PS02 PS32, brushed handrails HT10, cable railing kits CB05 CB17, protector sleeves CR72....
Check Stock

Frenemies : The Lost Souls MC

  • 【Adjustable Height】Supports 3.9FT - 6.2FT height riders. Perfect Scooter for family, We receive messages from parents and daughter and son riding together..
  • 【Big Wheel Scooter】Extra-large 230mm Wheels With Highest level ABEC9 Bearings and the shock absorption system, Make sure you are more relaxed when riding..
  • 【For Rider】Scooter for adults and teens, The best choice for traveling from company to subway or bus station, riding on campus, or sliding with your friends in the community..
  • 【Extra-wide Deck】Extra-wide Non slip DECK (22.4”x6”--- Support Max Shoe Size 15), High-strength and Thicken Aluminum T-tube, Max load Riders 240LBS..
  • 【Easy Folding and Carry】The three-second folding system, It can be placed on the trunk of a car or on the luggage rack of the subway, hidden for school lockers or under the desk..
  • 【Unique Gift】Exquisitely packaged gift boxes to kids and adults, Whether it’s a birthday gift, Thanksgiving gift, or a Christmas gift, this will be a gift that anyone really wants..
  • 【Lifetime Service】WAYPLUS Quick reply within 24 hours. Parts warehouses all over the US. Make after-sales service easier and effective..
Check Stock

Muzata 2Pack 6' 6' LED Handrail Aluminum Handrail Black Powder Coated Cable Railing Handrails for Indoor Outdoor Stair Deck Post Lights Handrail Lighting Nightscape Waterproof HT11 BPA

  • ...u to the sweet home from far away. Neighbors and friends will be definitely attracted by the gorgeous light on your deck and stairs.
  • Family safety – Muzata LED lighted handrail can help to show the way on your outdoor deck and indoor stairs at night, which will enhance the safety of your family. The LED strips are hidden inside the handrails and a diffuser cover is attached, these will not only get you a neat look on the handrails but also keep them away from kids. They are heavy duty to bear 200 lbs since the thickness is up to 3mm.
  • Easy to install – Made of high-quality aluminum, the handrails are easy to cut, drill, and DIY for various cable railing systems. It will work for any LED light strips smaller than 5/8″, like Philips Hue, most 2835 5050 LED strips , and some waterproof led strips. Please install the led strip inside and snap in the cover after connecting the handrail to the posts.
  • Waterproof – The handrails themselves are not only waterproof but also rust and corrosion resistant, ideal for both indoor and outdoor even seaside projects. However, they can’t promise to prevent the water from getting in, so you should always use water-proof LED strips for outdoor projects and seal all the wire connections.
Check Stock

Dometic SeaStar Cable Clip DS 035531

  • This is a set of durable Outriggers/ Stabilizer System that is suitable for most kayak and canoe use. The outriggers will provide boaters with a high level of stability while boaters are out boating. These stabilizers are ideal for boaters who are always out fishing at lakes or oceans in adding stability while standing on the boat..
  • Stainless steel mounting hardware is included with the outriggers/stabilizer kit, as shown in the listing’s picture. The stabilizer kit consists of 2 durable PVC float kits in red and off-white color, 2 aluminum arms/poles (together with lock nuts), and 2 Side/Deck Mounts that are made of durable, high impact fiber-reinforced structural quality PP (Polypropylene)..
  • Measurement of: PVC Float Kits – 27-1/2” (L) x 5” (W).
  • Aluminum Arms/Poles – 31-1/2” (L), 1-3/16” Diameter.
  • Side/Deck Mounts Screw Holes Distance — 3-1/4” (L) x 1-1/4” (W). Net Weight of the set: 5lb..
  • The large, easy-gripping lock nuts offer simple adjustment on the outriggers. It has a red button as quick release lock to lock and unlock the outriggers and stabilizers in order to secure the position. Simply press ....
Check Stock