Categories

Best Hidden Decking Screws

DeckWise (Black) Ipe Clip Extreme S Hidden Deck Fasteners, 5/32' Gap, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq.Ft. of AD and KD Hardwood, Thermal or Composite Decks (1050 Bucket)

  • (1140) #8×2″ T15 Stainless Steel Screws.
  • For use with air-dried and kiln-dried lumber along with composite or PVC decking.
  • Allows for expansion and contraction of all compatible wood and decking types.
  • Made from polyethylene with stainless steel black oxide insert.
Check Stock

NewTechWood PCHFS50 50-Square Feet Composite Decking Hidden Fastener, Black

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ... + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ... + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Start Clips - Universal Starter Deck Clips, Start Clips for Decking, Hidden Fasteners & Deck Starter Clips with Decking Screws (36 Pack, Black)

  • 【Characteristic】 Start clips are specially used to install perimeter deck boards to make the installation of grooved composite deck easier. Hidden starter clips provide you a high-quality solution and a clean and fastener-free deck appearance..
  • 【Material】 The start hidden fasteners made of high-quality stainless steel have strong corrosion resistance and are very suitable for indoor and outdoor use. The starter clips have high strength and perfect toughness, which can improve the installation efficiency greatly and have a better fastening effect on the deck..
  • 【Contents】 You will get 36 high-quality start clips, 38 stainless screws and 1 drive bit. Adjust the installation method according to actual usage requirements, and place a decking clip every 12 to 16 inches..
  • 【Application】 It is recommended to install the universal starter deck clips on the center edge of the joists, align the back of the deck starter clips on the same edge and fix them with screws, and then you can push the first board into the starter clips gently..
  • 【Service】 We provide you with 100% return and 24-hour friendly customer service. If you are disappointed with this start clips, we can exchange them for free or give you a full refund..
Check Stock

CAMO Marksman Pro Kit Deck Tool 1750 Edge Screws & Bits Edge Fastening Installation 3/16 Spacing Fits 5-1/4-5-3/4 Composite Decking 0345001 …

  • ALL IN ONE KIT - Marksman PRO Tool, (1750) 2-3/8" Edge Screws (covers approx 500 sqft) and 2 replacement driver bits..
  • FASTENER FREE DECK SURFACE - installs two patented CAMO Edge Deck Screws through the edge of the deck board—not the surface—for a beautiful deck top.
  • AUTOMATIC SPACING - creates automatic 3/16 in. (5mm) spacing - ideal for composite and PVC decking.
  • COMPOSITE AND PVC DECKING - Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board.
  • REDUCE SPLITTING & CRACKING - For exclusive use with CAMO Edge Deck Screws that auger material out to reduce splitting and cracking.
Check Stock

Power Pro 48634 Trim Screws, #9 x 4', All Purpose Wood, Deck, Composite, and Exterior Trim Screws, Rust Resistant, Bronze, 1 lb Box, 64 pcs

  • VERSATILE: Ideal for composite decking, wood decking and exterior trim projects.
  • CORROSION RESISTANT: Bronze ceramic coat exceeds 1,000 hour salt spray test under ASTM B125.
  • INSTALLS QUICKLY: 20 percent faster engagement with material compared to standard wood screws.
  • NO SPLITTING: 75 percent less wood splitting than standard wood screws.
Check Stock

DeckWise (Black) Ipe Clip EXTREMEKD Hidden Deck Fasteners, 1/4' Spacing, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of KD Hardwood, Thermal or Composite Decks (1050 Bucket)

  • Kit includes 1050 BLACK hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32' Spacing, Includes Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of AD Hardwood or Thermal Wood Decks (1050 Bucket)

  • Kit includes 1050 BROWN hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32\ Spacing, Includes Stainless Steel Black #8x2\ Trim-Head Screws for 300 Sq. Ft. of AD Hardwood or Thermal Wood Decks (525 Bucket)

  • Kit includes 525 BROWN hidden deck clips, 570 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 525 count kits will fasten 300 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Black) Ipe Clip Extreme S Hidden Deck Fasteners, 5/32' Gap, Stainless Steel Black #8x2' Trim-Head Screws for 300 Sq.Ft. of AD and KD Hardwood, Thermal or Composite Decks (525 Bucket)

  • (570) #8×2″ T15 Stainless Steel Screws.
  • Automatically spaces deck boards at 5/32″ (4mm).
  • Manufactured from polyethylene with stainless steel black oxide insert.
  • Reduces fastener tilting during installation improving gap consistency.
  • For use with air/kiln dried hardwood, composite, or PVC decking.
Check Stock

They Sold Their Souls for Rock and Roll (3-HR Version)

  • Conceals fasteners for the entire deck, including first and last boards, perimeter and stairs.
  • Each box includes (350) screws, (400) plugs and (3) set screws.
  • Plugs are made from OEM brand name deck boards, ensuring plugs match the decking.
  • Strong connection between deck boards and joists.
Check Stock