Categories

Best Hidden Fastener Clips

TigerClaw Phillips Flat Head Black Oxide Stainless Steel Scrails Collated Fasteners 930 per box

  • The fastest all stainless hidden deck fastener system.
  • Coated black to blend screw into black clips.
  • Stainless steel for extreme environments.
Check Stock

Deck Clips Pack of 36 | Grooved Decking Clips and Deck Screws | Deck Starter Clips for Composite Deck Boards | Universal Starter Deck Clips with Decking Screws

  • EASILY INSTALLS- These starter clips are used for the perimeter deck boards and easily install in grooved composite decking boards. Place one at the center edge of every joist 12"-16" apart..
  • THE PERFECT WAY TO DECKING- These hidden deck clips install below deck and help decking stay in place, without all the drill marks in your boards!.
  • WHAT’S INCLUDED- Purchase includes 36 deck screws, drive bit, and 36 deck clips..
  • CONTRACTORS- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

9 Tails Seal [Explicit]

  • 【 WORKS FOR ALMOST ALL SITUATIONS】- The kit contains 19 types of most common sizes of fastener clips, cover 6mm to 10mm hole sizes replacement for....
  • 【 IMPACT RESISTANT PUSH RIVETS】 - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!.
  • 【 PREFECT FOR WHAT YOU NEED 】- Up to 425 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you....
  • 【 BONUS FASTENER REMOVER】 - Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access....
  • 【 WIDELY APPLICATION】- Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips,....
Check Stock

NewTechWood PCHFS50 50-Square Feet Composite Decking Hidden Fastener, Black

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

uxcell 50Pcs 8mm Hole Rivet Car Door Push Clip for Toyota

  • Other Part Number: Screw Fender Body Door Trim Panel Hood.
  • Applications2: NYLON CHRISTMAS TREE Carpet Floor Mat Clips.
  • Interchange Part Number: Under Engine Splash Guard Rivet Fastener Clips.
  • Manufacturer Part Number: Plastic Push-Type Bumper Retainer Clip.
  • Applications1: Defender Door Card Interior Weatherstrip Moulding.
  • Package Content: 50(+/-2%) x Plastic Rivets Fastener(Non-OEM).
  • Brand: NYLON CHRISTMAS TREE Carpet Floor Mat Clips.
Check Stock

Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

415 Pcs Car Retainer Clips Fasteners Kit Yesker Bumper Clips 18 Most Popular Sizes Plastic Push Pin Rivets Set - GM Door Panel Clips for Honda Ford Toyota Chrysler

  • 18 MOST POPULAR SIZES - 480pcs multi-universal size car clip fastener kits suitable for OEM replacement of 6-10mm hole size, widely used in GM Ford....
  • IMPACT RETAINER PUSH RIVETS - These car retainer clips are made of high-quality black nylon material with heavy-duty construction, anti-wear and....
  • TOUGH FASTENER REMOVE - The Fastener Remover made of Durable Plastic and Metal material, offers you an easy access to slide under confined clips and....
  • CAR PANEL REMOVAL TOOLS - 4pcs different size car panel removers to help you quickly and easily remove car door trim panel and upholstery clips....
  • PACKAGE LIST - The auto body clip kit include 415Pcs bumper retainer clips, 1 plastic box, 5 durable fastener removal tools, 6 plastic cable ties and....
Check Stock

Topdex Hidden Deck Fasteners - Strong Plastic Clips with Stainless Steel Screws Inserts 0.19' Gap Spacing Between Wood Flooring Boards - Outdoor Decking Hardware, (90 Clips - 50 sqft)

  • A Sleek-Looking Deck – Build your decking like a pro with the help of these plastic fasteners. These flooring spacers let you mount your boards to the joists while keeping the screws hidden from sight..
  • Consistent Gap Spacing – Maintain the streamlined look of your decking and balcony flooring with these clips. Each plastic clip is designed to create a 0.19″ gap in between your terrace boards..
  • Easy Installation – Save time, effort, and energy in building your deck. To mount, just insert the clip into the side groove of your decking board, drive the screw with your drill, and you’re all set..
  • Crafted To Last – The last thing you need are decking clips that easily break. Our clips are made of tough plastic, while the screws are made of stainless steel that withstands rust or corrosion..
  • Decking Tools With Unbeatable Value – Get the most out of your money whenever you purchase our decking fastener clips. Each pack comes with plastic fasteners and stainless steel mounting screws..
Check Stock

Pilot

  • 【 WORKS FOR ALMOST ALL SITUATIONS】- The kit contains 19 types of most common sizes of fastener clips, cover 6mm to 10mm hole sizes replacement for Ford, GM, Chrysler, Toyota, Nissan, Mazda, Jeep, 2001 MR2 Spyder, 06 350z，1996 Ford F-250, motorcycles, Honda , Chevy Silverado. But NOT ONLY for these cars, if the sizes and shape meet your needs well, it's also a useful kit..
  • 【 IMPACT RESISTANT PUSH RIVETS】 - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!.
  • 【 PREFECT FOR WHAT YOU NEED 】- Up to 425 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted..
  • 【 BONUS FASTENER REMOVER】 - Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas..
  • 【 WIDELY APPLICATION】- Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment..
Check Stock

620 Pcs Car Retainer Clips & Plastic Fasteners Kit Fender Rivet Clips 16 Most Popular Sizes Auto Push Pin Rivets Set

  • Push retainer clips Packed 620 PCS are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement.
  • 620 PC fastener retainer clips include 16 most common sizes.
  • FASTENER REMOVER - Allow you to quickly and easily remove the car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
  • Povide clear pictures for your reference, please check the size, type, and shape to make sure the item is the one that you need.
  • Includes Detailed Images Of Size And Quantity For Each Retainer To Help Stay Organized.
Check Stock

GOOACC GRC-44 100PCS Nylon Bumper Rivet Clips for GM 21030249 for Ford N807389S,1PC Bonus Fastener Remover

  • MULTI-USE - Replacement for: GM #21030249, Ford #N807389S & Chrysler #6503598.
  • THE SAME SIZE & SHAPE AS ORIGINAL - Head dia: 20mm.
  • stem length: 20mm & fits: 8mm (5/16") hole,hese universal push-type fastener clips will fit on most of auto parts with 8mm hole, hold your parts very tightly..
  • Push-type Design - Push in type, rivet post pressure expands legs for fast and tight fastening. easy to fasten Bumper Fender Flare and Mud Flap. Better replacement for original bumper and fender clips..
  • Great Material - These bumper clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use..
  • PACKAGE INCLUDE: 100PCS Fastener Rivet Clips,1PC Fastener Remover.
Check Stock

uxcell 52Pcs Panel Bonnet Insulation Lining Pad Fastener

  • Interchange Part Number: Under Engine Splash Guard Rivet Fastener Clips.
  • Manufacturer Part Number: Plastic Push-Type Bumper Retainer Clip.
  • Other Part Number: Screw Fender Body Door Trim Panel Hood.
  • Applications1: Defender Door Card Interior Weatherstrip Moulding.
  • Applications2: NYLON CHRISTMAS TREE Carpet Floor Mat Clips.
  • Package Content: 52Pcs(+/-2%) x Plastic Clips.
Check Stock

Car Hood Insulation Retainers, 30pcs Bumper Cover Retainer Clips with One Fastener Remover, Heat and Sound Insulation Nylon Clip for Auto Hood, Replacement for OEM 4878883AA and More

  • ...and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment..
  • 【Size】: Hood Clips' Size: Head Diameter: 30mm, Stem Length: 12mm, Stem Diameter: 8.7mm. Fastener Remover's Length: 225mm, Clip Diameter: 7.6mm. The fastener remover with hood insulation consists of premium quality plastic material, which is strong durable, the clip is not easy to break..
  • 【What Will You Get】: Package include 30pcs automotive clips and 1pc fastener remover. Our product comes complete with a high-level warranty. Our department Usually does a 100% quality inspection on the product before delivery. We will try our best to ensure every product is not defective. If you have any problems, feel free to contact us. We'll reply you as soon as possible in 24 hours on weekdays..
Check Stock