Categories

Best High Expansion Foam Agent

2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 2 Gallon Kit.
  • Consists of 1 gallon of Part A and 1 gallon of Part B and produces 10 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 5 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

AWF PRO Sikaflex 1a Kit - One Component, Flexible, Non Sag, Polyurethane Concrete and Masonry Sealant for Vertical and Horizontal Surfaces, Sikaflex 1a 10 oz Limestone (12), AWF 2000 Caulk Gun (1)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1.25 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1/2 cubic foot..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 6LB. Density polyurethane flotation Foam 1 Quart Kit.
  • Consists of 1 Pint of Part A and 1 Pint of Part B and produces 0.375 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)

  • ...ts liquids such as water, gas, and oil from penetrating.
  • once fully cured, foam is compatible with epoxy, polyester or vinyl ester resins, and can be painted.
  • IDEAL WORKING TEMPERATURE IS 75-85°F. Proper temperature, mixing, timing and venting are critical for proper foam expansion.
  • the foam expands rapidly after mixing, so prep the surface in advance and be ready to pour.
  • AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT. Yield: 2-Quart Kit – 3/4 cubic ft, 2-Gallon Kit – 3 cubic ft.
  • Flotation Range for 6lb foam: 23 lbs per mixed 2 quart kit and 92 lbs per mixed 2 gallon kit.
Check Stock

BMW 82141467704 Grey Antifreeze Coolant - 1 Gallon

  • Never remove the radiator or expansion tank cap from a hot engine.
  • Provides protection for metals such as cast iron, steel and aluminum.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam 1/2 Gallon Kit.
  • Consists of 1 quart of Part A and 1 quart of Part B and produces 1 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 2 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

TotalBoat 6 Lb Density Expanding Foam Kit, 2 Part Closed Cell Polyurethane Liquid Foam for Boat Flotation, Casting, Carving, Sculpture, Reinforcement and Void Filling (2 Gallon Kit)

  • TWO-PART, MARINE GRADE EXPANDING FOAM cures very hard and rigid, with high compressive strength ideal for a number of marine and residential applications, including structural reinforcement, architectural castings, art projects and flotation.
  • 6 POUNDS PER CUBIC FOOT HIGH-DENSITY FORMULA is perfect for casting, carving, sculpture, plug making, sign making, flotation for boats and buoys, floating decoys, part fabrication, replicating wooden parts, rigidifying, structural support and more.
  • FAST-SETTING, CURES TO A 94% CLOSED CELL FOAM, where each cell traps air and prevents liquids such as water, gas, and oil from penetrating.
  • once fully cured, foam is compatible with epoxy, polyester or vinyl ester resins, and can be painted.
  • IDEAL WORKING TEMPERATURE IS 75-85°F. Proper temperature, mixing, timing and venting are critical for proper foam expansion.
  • the foam expands rapidly after mixing, so prep the surface in advance and be ready to pour.
  • AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT. Yield: 2-Quart Kit – 3/4 cubic ft, 2-Gallon Kit – 3 cubic ft.
  • Flotation Range for 6lb foam: 23 lbs per mixed 2 quart kit and 92 lbs per mixed 2 gallon kit.
Check Stock

DADAKEWIN 13 * 100mm Drying Tube U-Shaped Glass Tube for Air Drying, Borosilicate 3.3 Glass Heavy Duty Customizable Lab Tubes- Pack of 1 (Color : 13 * 100mm)

  • Packing: 1 piece/pack, 13*100mm Drying Tube.
  • the drying tube is a device which is drying gas or removing impurities in the gas in the chemical experiment.Generally, there are connecting ports at both ends for connecting the pipes, and the middle part is filled a solid desiccant or impurity removal agent..
  • When the gas flows into the drying tube from one end, as a result of the water or other impurities in the gas react chemically with the desiccant or impurity removal agent so that the water or impurities separate from the gas, and the relatively clean gas flows out from the other end..
  • Premium Materials: This Drying Tube is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

PrimaSleep 9 Inch Multi Layer Gel-Infused Memory Foam Mattress, Full, White

  • Multi-layer Deluxe Memory Foam Mattress, which is constructed with I-gel cooling foam, high-density foam, Airflow convoluted foam, and high-density support foam, supports your sleep with minimum disturbance..
  • I-gel cooling foam and Airflow convoluted foam help the mattress from temperature for good sleeping.
  • High-Density foam layers support your body and disperse weight evenly for all kinds of sleepers to be comfortable.
  • Built with CertiPUR-US Certified memory foam layers.
  • Please allow 24 - 72 hours for your Mattress to regain its full shape. Any memory foam will expand faster in a warmer room. In cold temperature, at delivery, your mattress may take a bit longer to return to full sized from its compressed state.The expansion time of the mattress will vary as per the surrounding..
Check Stock

Signature Design by Ashley Balintmore Accent Cabinet, 42"W x 16"D x 74"H, Dark Brown

  • General Note: Please allow 24 - 72 hours for your Mattress to regain its full shape. Any memory foam will expand faster in a warmer room. In cold temperature, at delivery, your mattress may take a bit longer to return to full sized from its compressed state.The expansion time of the mattress will vary as per the surrounding.General Note: Please allow 24 - 72 hours for your Mattress to regain its full shape. Any memory foam will expand faster in a warmer room. In cold temperature, at delivery, your mattress may take a bit longer to return to full sized from its compressed state.The expansion time of the mattress will vary as per the surrounding..
  • THE RIGHT COMBINATION - Our special recipe for rejuvenating rest? Refreshing green tea and moisture-absorbing ActivCharcoal infused into pressure-relieving memory foam that cradles your shape so you awake free of aches and pains and fresh as a daisy, Pressure relieving comfort foam.
  • PRESSURE-RELIEVING FOAMS - 3 inches conforming memory foam, 2 inches soft, airflow enhancing comfort foam, and 7 inches durable, high density base support foam.
  • ideal for side sleepers and petite to average weight sleepers.
Check Stock