Categories

Best High Flow Manifold

ARB 4x4 Accessories 170112 Differential Axle Breather Kit for drivetrain differentials transmissions and transfer cases

  • The axle breather manifold is machined from billet aluminium and anodized, making it lightweight and resistant to the elements..
  • The manifold has 4 axle breather ports allowing for between 1 and 4 breather lines to be connected. It is very compact allowing it to be installed in....
  • The air filter is the ARB compressor air filter, which is a splash resistant air filter with a washable high flow sintered bronze filter cartridge..
  • 8mm Polyethylene tubing is flexible, oil resistant, water resistant and heat resistant.8mm tubing has been selected over the standard 6mm tubing to....
  • The kit comes with self tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4 inch) bolt or stud, which....
Check Stock

SPW Hunter Premium Valve Manifold System PGV101GS with Flow Control - Heavy Duty Action Machining Parts - 3/4'' or 1'' Slip PGV-101 (4 Zone)

  • Premium Manifold with Hunter 1" Slip Valves With Flow Control. DryConn waterproof connectors and a flashlight keychain included!.
  • The Action inlet and all outlets fittings can accept 3/4" PVC pipe OR 1" PVC Coupling for 1" Pipe. Action Manifold parts are premium, rugged, heavy-duty, AND made in the USA!.
  • Action Machining manifold systems are constructed out of thick schedule 80 PVC. O-Ring sealed for tool-less installation. 235 Max W.P. @ 73°. Buttress thread for a strong seal. Fully unionized..
  • Never cut your system apart again to change a junk valve and easily expand your manifold system..
  • Hunter PGV valve are high-grade, corrosive and UV-resistant PVC construction, glass reinforced jarring and a rugged double-beaded, leak-proof diaphragm with support to prevent stress failure.
Check Stock

Rain Bird PRS05030S Drip Irrigation 30 PSI Retrofit Pressure Regulator for 1/2" Threaded Riser, Black

  • Easily converts a 1/2" riser or existing shrub spray to low volume Drip watering system.
  • Provides 30 psi pressure regulation for best performance of micro-watering devices.
  • Designed for use with free flow Drip irrigation manifolds.
  • Top outlet accepts a 1/2" threaded Drip manifold (sold separately).
  • Use with Rain Bird free flow manifold models (sold separately): MANIFRE1S, MANIFRE4S, and MANIFRE6S.
Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

  • 【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
  • 【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
  • 【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..
Check Stock

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

  • Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
  • Investment cast 310s stainless steel construction..
  • Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
  • Application: 2008+ Mitsubishi Lancer Evolution 10 X..
Check Stock

P PBAUTOS 4CFM 1/3HP Single-Stage Vacuum Pump and R410a AC Manifold Gauge Set Refrigeration Kit with Carrying Tote, Leak Detector for HVAC A/C Refrigeration Recharging and Maintenance

  • [High-quality Vacuum Pump] Our vacuum pump is designed to have high efficiency and low noise for maintaining air conditioning systems. The aluminum housing makes the pump light-weight and durable, the thermally protected motor is applicable for long-term operation..
  • [Multi-functional Manifold Gauge] Our manifold gauge is designed to measure the pressure of the equipment accurately and repair air conditioning systems. The good-quality gauge improves the reading accuracy largely. It is suitable for R410A, R22, R134A, R404A..
  • [Durable Leak Detector] Our leak detector is applicable to all the different refrigerants, and it has the same sensitivity on all the refrigerants. The detection results are not affected by smoke, air flow or temperature change..
  • [Three-color Hoses and Refrigerants Application] Three-color hoses are installed with brass fittings. Different colors are designed to help identify high pressre, low pressure and the filling hose. The working pressure of hose is 800PSI-4000PSI..
  • [Complete Package List] It includes 1* 4CFM Vacuum pump, 1* Manifold gauge, 1* Carrying tote, 1* Leak detector, 1* Teflon tape, 1* Gloves.
Check Stock

JDMSPEED New Stainless Steel Exhaust Manifold & Gasket Kit Replacement For Grand Cherokee Wrangler 4.0L Replacement For Jeeps Select 1991-1999 4.0L Engine Only Replaces 33007072 4883385

  • Pipes Have Been Upgraded To Stainless Steel.
  • Flex Joints & Flange Still Made Of Standard Steel For Natural Thermal Expansion/Contraction.
  • Package Include: 1 x Exhaust Manifold, all necessary gaskets and downpipe hardware.
  • Included heat shield, Includes flex bellows.
  • Replace Part Number: 33007072, 4883385, 674-196, 10105812.
  • Replacement For Jeep Cherokee L6 4.0L 1991-1999.
  • Replacement For Jeep Comanche (MJ) L6 4.0L 1991-1992.
  • Replacement For Jeep Grand Cherokee L6 4.0L....
  • Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.
Check Stock

DNA Motoring HDS-SSAM86 Stainless Steel Exhaust Header Manifold

  • Made of high quality T-304 Stainless Steel material.
  • Inlet/ outlet: 1-1/2" OD mm/ 2-1/2" OD mm.
  • 4-2-1 full length header design/ replaces OEM manifold.
  • Increase high flow air, instantly gain 10 -15 HP./ TQ..
Check Stock

BoardRoad Rear Catalytic Converter with Gasket Fit For 2003-2011 Honda Element 2.4L 4CYL K24

  • ✅【High Standard】：This Manifold Catalytic Converter meets EPA standard. Fit for 03-11 Honda Element 2.4L 4CYL K24..
  • ✅【Material】：The ceramic carrier completely fills the inside of the interior of metal shell. The ceramic carrier is honeycomb, hollow , and coated with Rare Earth Stablizers metals. The hollow carrier is to help the gas flow..
  • ✅【Features】：The ceramic hollow interior is coated with CeO2Rare earth stablizers metals, the ratio is up to standard, after full testing under extreme conditions,the heat resistance has been greatly improved and the service life has been fully extended..
  • ✅【High flow design】：High flow design retains maximum engine output and maximizes catalytic efficiency.To provide more oxygen to your engine for an increase in power and performance..
  • ✅【Perfect Fit】：We use the original car mold to produce the catalytic converter. Built to match the original car, Not a generic model. Highly fit , perfect in workmanship..
Check Stock

P PBAUTOS 4CFM 1/3HP Single-Stage Vacuum Pump and R134a, R407C, R404A, R410A Manifold Gauge Set Refrigeration Kit with Carrying Tote, Leak Detector for HVAC Refrigeration Recharging and Maintenance

  • ...ty Vacuum Pump] Our vacuum pump is designed to have high efficiency and low noise for maintaining air conditioning systems. The aluminum housing makes the pump light-weight and durable, the thermally protected motor is applicable for long-term operation..
  • [Multi-functional Manifold Gauge] Our manifold gauge is designed to measure the pressure of the equipment accurately and repair air conditioning systems. The accurate gauge improves the reading accuracy largely. It is suitable for R134a, R407C, R404A, R410A refrigerants..
  • [Durable Leak Detector] Our leak detector is applicable to all the different refrigerants, and it has the same sensitivity on all the refrigerants. The detection results are not affected by smoke, air flow or temperature change..
  • [Three-color Hoses and Refrigerants Application] Three-color hoses are installed with brass fittings. Different colors are designed to help identify high pressre, low pressure and the filling hose. The working pressure of hose is 800PSI-4000PSI..
  • [Complete Package List] The vacuum pump set includes 1* 4CFM Vacuum pump, 1* Manifold gauge,....
Check Stock

ATP Automotive Graywerks 101105 Exhaust Manifold

  • Manufactured to OE design ensuring manifold will line up and flow like the original unit.
  • High grade metallurgy resists fatigue cracking and breakage.
  • Precision machine finished providing smooth installation and leak free performance.
  • Upper and lower flange gaskets along with lower flange hardware are included (Heat shields and plugs are included where needed).
  • Industry Leading Limited Lifetime Warranty.
Check Stock

ATP Automotive Graywerks 101321 Exhaust Manifold

  • Manufactured to OE design ensuring manifold will line up and flow like the original unit.
  • High grade metallurgy resists fatigue cracking and breakage.
  • Precision machine finished providing smooth installation and leak free performance.
  • Upper and lower flange gaskets along with lower flange hardware are included (Heat shields and plugs are included where needed).
  • Industry Leading Limited Lifetime Warranty.
Check Stock

Speedmaster 1-147-035 Fits Chevy SBC 350 HiRise Vortec Intake Manifold Machine Polished

  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Unique removable water flow divider to eliminate the thermostat in racing applications.
Check Stock