Categories

Best High Frequency Tig Welding

Reboot TIG Welder AC/DC Aluminum Welding Machine with Pulse Foot Pedal 200A Full Digital Control 110/220V High Frequency TIG ARC 2 in 1 Stick Welding Machine

  • AC/DC TIG Welding(pulse)--alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum,....
  • 2T/4T (TIG)--determines the control of the operating mode and offers extended control over the current flow. In 2T mode, the high-frequency ignition....
  • TIG Aluminum Welder--10-200AMP AC/DC TIG Electric Current Output.
  • Quality TIG welding on Aluminum, Cast Iron, low hydrogen , Stainless or Steel and....
  • Equipped with a footswitch, welding is more convenient, anytime, anywhere, free welding!（30A breaker suggested for 220V, 50A breaker suggested for....
  • 3 year’s warranty provided,please contact us for any assistance.We will take each and every action to prevent you from bearing any loss at Amazon as....
Check Stock

HUGEWELD Tig Welder TIG-200,HF TIG/Stick/Arc 2 in 1 TIG Welders,200 Amp 220V TIG Welding Machine,IGBT Inverter Portable Digital Display for Beginner

  • ✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
  • ✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
  • ✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
  • ✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
  • ✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
  • application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..
Check Stock

Reboot TIG Welder AC/DC Aluminum Welding Machine with Pulse Foot Pedal 200A Full Digital Control 110/220V High Frequency TIG ARC 2 in 1

  • ...d direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum, copper and many more. 2 in 1 combination device - TIG & MMA welding is possible up to 200A..
  • 2T/4T (TIG)--determines the control of the operating mode and offers extended control over the current flow. In 2T mode, the high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode, the arc is ignited after pressing and releasing the button once. When the button is pressed and released again, the ignition is stopped. Some functions such as current reduction are only possible in the 4T..
  • TIG Aluminum Welder--10-200AMP AC/DC TIG Electric Current Output.
  • Quality TIG welding on Aluminum, Cast Iron, low hydrogen , Stainless or Steel and Precise Welding of Thinner-gauge Materials.
  • Equipped with a footswitch, welding is more convenient, anytime, anywhere, free welding!（30A breaker suggested for 220V, 50A breaker suggested for 110V）.
  • 1 year’s warranty provided,please contact us for any assistance.We will take each and every action to prevent you from bearing any loss at Amazon as we value our customer's investment and trust more than anything else..
Check Stock

LOTOS TIG200ACDCP 200A AC/DC Pulse Aluminum TIG/Stick ARC Welder with Digital Control, IGBT Square Wave Inverter, 110/220V Dual Voltage, 10 Settings Savings, 0.5~200HZ Pulse Frequency, Brown

  • ... ★ RATED OUTPUT & INPUT: Maximum 5-200AMP DC/10-200AMP AC TIG Electric Current Output.
  • Quality TIG welding on Aluminum, Stainless or Steel and Precise Welding of Thinner-gauge Materials.
  • ★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (AC 120V ±15%, AC 230V ±15% 50/60Hz)..
  • ★ 10 SETTINGS SAVING: Need to switch between different projects/materials? You can save 10 different parameter settings with Lotos TIG200ACDCP. No need to adjust the parameters everything time while switch between different projects/materials. ★ PAPST ADVANCED COOLING SYSTEM: ensures the TIG Welder have a stable and durable high performance..
  • ★ Digital Control PRECISE WELDING-- HF start hand torch control and precise foot pedal welding heat control with the digital control welding parameters setting. Suitable for precise welding stainless steel, mild steel, aluminum, and other metal materials. (Foot Pedal and Argon Regulator NOT included, Please Search Lotos FP05P for Foot Pedal or Lotos AR03 Lotos AR04 for Argon Regulator).
Check Stock

YESWELDER TIG-205DS HF TIG/Stick/Arc TIG Welder,205 Amp 110 & 220V Dual Voltage TIG Welding Machine with Foot Pedal

  • [MORE POWERFUL] Up to 205 and more amps,very suitable for welding most types of thicknesses regarding work-pieces, the outstanding 60% duty cycle can also ensure long-time welding.(Foot Pedal Included).
  • [HIGH FREQUENCY ARC STARTING] High-frequency (HF) for non-contact arc initiation..
  • [HF TIG/STICK 2 IN 1] Capable of either DC TIG welding (stainless and mild steel) or Stick Welding..
  • [LIGHTWEIGHT AND PORTABLE] Portable in the shop or at the jobsite — at 13 pounds, the handle allows the end user to easily move from location to location..
  • [ADDED SAFETY] Certificated by ETL, Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control..
Check Stock

Aluminum Welder AC DC 200 Amp HF TIG/Stick Welder Digital with Pulse 200A Welding Machine Dual Voltage 220V/110V Foot Pedal control

  • 1. 4 In 1 Combination Aluminum Welder : TIG Inverter with AC and PULSE Function, and Arc stick welding (MMA), with Foot Pedal control,Dual Voltage....
  • 2. TIG Aluminum Welder : 10-200AMP AC/DC TIG Electric Current Output.
  • Quality TIG welding on Aluminum, Cast Iron, low hydrogen , Stainless or Steel....
  • 3. MMA/STICK Welder: 15-180AMP DC Stick / MMA Electric Current Output with Arc Force, Arc hot start, smooth and stable arc is easily for welding with....
  • 4.Digital Control : Digital control of functions and parameters allows control of the welding process at a professional level from start to finish,....
  • 5. Other Function: Pulse, Foot Pedal Control, Digital Display, High Frequency, 2T-4T touch control, start amps, end amps, upslope, downslope, AC....
Check Stock

TOOLIOM TIG Welding Tungsten Electrode 2% Thoriated Tungsten 3/32'x 7' (Red, EWTh-2) 10-Pack

  • Electrode Size: 3/32" x 7" or 2.4mm x 175mm.
  • Material:2% Thoriated Tungsten (Red, EWTh-2) adhering AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.
  • Performance:Good welding performance,long life and operate easily.
  • To be used on TOOLIOM TL-200T TIG Welder(High Frequency TIG Welding).
  • Package:Ten (10) pack of premium thoriated tungsten rods ,vacuumed sealed, no oxidation,long time preservation.
Check Stock

Aluminum Welder Machine 110/220V Mig Welding Equipment 210A Gas/Gasless RBM-2100D 4 in 1 2T/4T Tig Stick Mig Welding Flux Core Supports 2lbs/10lbs Wire(Need Spool Gun for Aluminum Welding)

  • [Gas/Gasless Welding Equipment] ①RBM-2100D supports gas(2/10lbs solid wire) welding,install V-shaped wire feed wheel adapts to 0.8/1.0mm wire.
  • gasless(2/10lbs flux core wire) welding,select the knurling wheel for 0.8/1.0mm wire.(the wheels are come together with machine).
  • [Spool Gun/Aluminum Welding Opinion] RBM-2100D supports welding with a spool gun(I can weld aluminum with this),please refer to the instruction manual for detail operation(spool gun is not included).
  • [ARC/TIG Welding] ARC/Stick welding is great for repairing broken fences or brackets,can weld with 3/32’’ - 1/8″6013/7018 rods.
  • Lift tig not high frequency tig, but also requires pure argon gas(tig torch is not included)..
  • [Duty Cycle] 110V-MIG: 60% at 30-140A,220V-MIG: 60% at 30-210A.
  • 110V-ARC: 60% at 30-100A,220V-ARC: 60% at 30-150A.
  • [Warranty] Buy with confidence cause Reboot provides 7*24H after-sale service,and 1-year limited warranty for this RBM-2100D..
Check Stock

HITBOX HF 2 in 1 TIG ARC Welder 200Amp 110V/220V Dual Voltage TIG/ARC Welding Machine Inverter IGBT Stick MMA Welder Model HBT2000

  • 【Dual Voltage TIG / ARC Welder】 110V/220V 2 in 1 HITBOX welding machine, used as TIG welder or ARC MMA stick welder.The inverter frequency is up....
  • 【IGBT Inverter】This Tig welder also uses an advanced compact IGBT inverter, designed with automatic overheat and over current welding....
  • 【2T & 4T Functions】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is....
  • 【Powerful Welding Application】TIG welding thickness 0.3-5.0mm, application of Tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for....
  • 【Buy With Confidence】HITBOX offers good after-sales service. If the machine can not work or have other problem when working, please contact us at....
Check Stock

hynade Tig Welder TIG215A, HF ARC/TIG/Stick TIG Welders 215 Amp 110/220V Dual Voltage TIG Welding Machine

  • Multi-function tig welding machine : machine with HF(High Frequency Arc Starting) TIG, Lift TIG, Stick/Arc function, the user easy select the function depend on environment if needed. HF TIG need to connect argon gas into machine, for lift Tig the torch need a gas hose connect to gas bottle.Under Stick function, machine with Hot arc starting and Anti-Stick.
  • Dual voltage tig welder 110/220V : Machine designed basic on dual voltage 110V/220V, Under 220V , TIG mode is 215Amps , MMA is 200A .Under 110V,185Amps for TIG, 165Amps for Stick .The machine with 110V power plug, a conversion wire in the package (220V male 110V Female).
  • Post time adjustment welders: The post time for the gas can be adjust from 2 to 8 Seconds, It is IGBT Inverter Technology, 50/60Hz 110/220V base, with LED current display show the real current. This machine with full new designed, adopt advance technology and high quality electronic parts, These can help machine makes perfect work.
  • Compact design: The design makes the welding machine light and easy to carry. Great for studio or home use . You can use it to weld doors and windows, fences, repair cars and more. Definitely a good helper for your life and work.
  • Accessories:All parts come with the TIG Stick welder machine are show in ....
Check Stock

Square Wave TIG 200 TIG Welder

  • The user interface makes machine setup easy. Available features, such as Pulse, which provides a drumbeat-like rhythm for filler metal deposition, make you become a better TIG welder - faster..
  • A Great TIG Machine for Aluminum - For a wider or tighter welding bead, users can easily adjust AC Frequency Control. AC Balance can be adjusted to provide more cleaning action on dirty aluminum or to maximize penetration on thick materials..
  • TIG and Stick from One Power Source - The multi-process machine can TIG weld when precision and bead appearance are important. Users also have the advantage of stick welding capability for outdoor work or thicker materials..
  • Take it Everywhere, Plug in Anywhere. - Plug in the Square Wave TIG 200 where you need it - a standard 120V circuit or 230V for maximum output. Portable and convenient to use, only 46 lb (21 kg)..
Check Stock

HZXVOGEN 110V 220V 250A Aluminum MIG Welder IGBT Lift Tig Gas Gasless Stick Arc MMA Welding Machine No Gas Self- shielded Home Use Factory Machine MIG250DP

  • 【Dual Voltage TIG / ARC Welder】 110V/220V 2 in 1 HITBOX welding machine, used as TIG welder or ARC MMA stick welder.The inverter frequency is up....
  • 【IGBT Inverter】This Tig welder also uses an advanced compact IGBT inverter, designed with automatic overheat and over current welding....
  • 【2T & 4T Functions】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is....
  • 【Powerful Welding Application】TIG welding thickness 0.3-5.0mm, application of Tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for....
  • 【Buy With Confidence】HITBOX offers good after-sales service. If the machine can not work or have other problem when working, please contact us at....
Check Stock

LONGEVITY Tigweld 200sx - 200 Amp AC DC Tig/Stick Welder with Digital Display 110v 200v

  • The unit features high frequency start tig and includes a foot pedal for great tig welding control and operation.
  • The stick welder operates on 110v and 220v volts and is capable of welding 7018, 6013, and other stick welding electrodes.
  • With the flip of a swtich, you are able to weld aluminum in AC mode. Features pre-flow, post flow, and clearance effect (balance) function for greater welding control.
  • Great machine for the hobbyist or professional with an easy to use panel. Excellent heat control.
  • Extemely portable weighing 37 lbs and easily carried to any job on site or offsite. The 110v adapter makes it easy to connect to a standard usa outlet..
Check Stock