Categories

Best High Frequency Welding Pipes

HUGEWELD Tig Welder TIG-200,HF TIG/Stick/Arc 2 in 1 TIG Welders,200 Amp 220V TIG Welding Machine,IGBT Inverter Portable Digital Display for Beginner

  • ✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
  • ✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
  • ✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
  • ✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
  • ✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
  • application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..
Check Stock

Weller Mini Butane Torch - WLTBUM2

  • 【Durable】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear.Come with automatic ignition device.
  • 【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can up to 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Use】 Install the end of the welding torch on the gas cylinder, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Ergonomic Design 】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Operation And Tips】Use only MAPP and propane gas.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • Before attaching torch to gas cylinder,check and ma....
Check Stock

WeldingCity Acetylene Welding Brazing Nozzle 4-W-J (Size 4) with W-J Mixer for Victor J-Series Handles

  • PARAMETERS: 5x5x7mm large triangular welding tip: high temperature resistant 304 stainless steel alloy. Fixed Weld Head: High temperature 316 stainless steel. 5mm standard round mouth..
  • LARGE TRIANGLE WELDING TIP: concave welding tip (the plastic electrode does not move after welding), which is suitable for drawing and fixing before welding..
  • FEATURES: 100% new and high quality, good high temperature resistance, smooth welding surface, non-stick welding rod, no scratches on the welded surface, more beautiful..
  • COMPATIBILITY: Mainly suitable for replacement nozzles for heat guns equipped with diaphragm pumps and vinyl heat guns..
  • APPLICATION: Special welding tip for welding PP, PVC, PE sheets, water tanks, water tanks, plastic pipes, etc..
Check Stock

EXCELLWAY 200A ARC/Stick/LIFT TIG Welder,110V/220V IGBT Inverter Portable Stick Welder,Digital Display Built-in Hot Start ARC Force Welding Machine,Overheating Overload Protection ARC Welder

  • 【MMA/Stick/LIFT TIG 2 in 1】:Perfect Christmas gifts for dad and husband,EXCELLWAY 2 in 1 welder,2 welding modes in 1, high frequency starting TIG: non-contact arc ignition, reducing tungsten and material consumption. The rated input frequency is 50/60Hz, the duty cycle is 60%, the welding speed is fast, the welding seam is flawless, and the welding process is the best. Suitable for stainless steel, alloy steel, mild steel, copper, cast iron, chromium, and other metals. (Need to buy an extra tig lift torch, not included).
  • 【IGBT Inverter】: EXCELLWAY IGBT Inverter Welder IGBT conduit makes the inverter frequency higher, saves metal materials, greatly reduces power loss, and adjusts the output current at a subtle level, making the welding process control more ideal and the effect more satisfactory..
  • 【Overheating&Overload Protection】: Durable, safe, and reliable. Suitable for novices and great for professional or DIY use.Hot Start ARC Force: Support Rods:2.6mm- 3.2mm Rods.
  • 【60% High Duty Cycle】: Long-term continuous work. EXCELLWAY Welding Machine can work continuously for a long time, with high work efficiency and good effect..
  • 【What you will get】:1x EXCELLWAY 200A MMA/Stick/LIFT TIG 2 in 1 Welder,1x 10Ft Electrode Holder,1x 10Ft Work Cla....
Check Stock

Toolly Concrete Hole Saw Kit, 30mm 40mm 60mm Tungsten Steel SDS Plus Shank Wall Hole Cutter Cement Stone Drill Bit Set with 220mm Connecting Rod for Cement Wall Masonry Foam Brick

  • 【Professional Hole Saw Kit】This concrete hole saw kit provides you with 3 concrete hole saw bits.
  • 1 x allen wrench, allows you to quickly drill the cleaning holes and meet your professional needs..
  • 【Product Size】3Pcs concrete hole saw: 1-2 / 11 inches (30mm), 1-3 / 5 inches (40mm), 2-9 / 25 inches (60mm). 1 SDS connecting rod 8-7/10 inches (220 mm). 3 center drill bits 4-1/3 (110mm)..
  • 【Long SDS plus shank】The hole saw drill bit set comes with a SDS Plus shank, and the male thread adapter design tightly matches your drill chuck and greatly increase the drilling speed..
  • 【Premium Material】Cement stone drill bit set is made of high quality tungsten steel and alloy, very sturdy & durable, simple to operate, easy to use and fast perforation, adopts high-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth in long service life..
  • 【Widely Used】The masonry hole saw kit can easily drill through the most common wall materials (earth embryo, foam brick, cement wall, masonry wall, red brick). At the same time, it can also be used for AC tubing, water pipes, exhaust hoses , Air conditioning drilling operations, etc..
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

Propane Torch with 4.8ft Hose and Self Ignition Trigger, Mapp Gas Torch,Welding Torch for Brazing,Barbecue,Heating,Handheld Blow Torch For MAPP Cylinder

  • 【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can reach 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Operate】 Install the end of the welding torch on the Qcc1/Type1 propane tank, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Excellent and Professional Design】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Specifications and Note】 Please use gas type: MAPP, MAP-PRO propane.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • 【Service and Quality Assurance】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear, we will provid....
Check Stock

EXCELLWAY Stick Welder, 200A TIG Welder,110V\\/220V IGBT Inverter Portable Stick Welder,Digital Display Built-in Hot Start ARC Force Welding Machine,Overheating Overload Protection ARC Welder

  • 【MMA/Stick/LIFT TIG 2 in 1】:Perfect Christmas gifts for dad and husband,EXCELLWAY 2 in 1 welder,2 welding modes in 1, high frequency starting TIG: non-contact arc ignition, reducing tungsten and material consumption. The rated input frequency is 50/60Hz, the duty cycle is 60%, the welding speed is fast, the welding seam is flawless, and the welding process is the best. Suitable for stainless steel, alloy steel, mild steel, copper, cast iron, chromium, and other metals. (Need to buy an extra tig lift torch, not included).
  • 【IGBT Inverter】: EXCELLWAY TIG stick welder IGBT Inverter Welder IGBT conduit makes the inverter frequency higher, saves metal materials, greatly reduces power loss, and adjusts the output current at a subtle level, making the welding process control more ideal and the effect more satisfactory..
  • 【Overheating&Overload Protection】Our Lift TIG stick Welder durable, safe, and reliable. Suitable for novices and great for professional or DIY use.Hot Start ARC Force: Support Rods:2.6mm- 3.2mm Rods..
  • 【60% High Duty Cycle】: Long-term continuous work. EXCELLWAY Welding Machine can work continuously for a long time, with high work efficiency and good effect..
  • 【Perfect gifts】 Come and give your father, husband, brothe....
Check Stock

YESWELDER TIG-205DS HF TIG/Stick/Arc TIG Welder,205 Amp 110 & 220V Dual Voltage TIG Welding Machine with Foot Pedal

  • [MORE POWERFUL] Up to 205 and more amps,very suitable for welding most types of thicknesses regarding work-pieces, the outstanding 60% duty cycle can also ensure long-time welding.(Foot Pedal Included).
  • [HIGH FREQUENCY ARC STARTING] High-frequency (HF) for non-contact arc initiation..
  • [HF TIG/STICK 2 IN 1] Capable of either DC TIG welding (stainless and mild steel) or Stick Welding..
  • [LIGHTWEIGHT AND PORTABLE] Portable in the shop or at the jobsite — at 13 pounds, the handle allows the end user to easily move from location to location..
  • [ADDED SAFETY] Certificated by ETL, Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control..
Check Stock

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 3.0 Inch Exhaust System…

  • DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

75LBS Welding Magnet,2 PCS 5\ Arrow Strength Welding Magnetic Holder, For Metal Working,75LBS Arc Welding Electrode Holders,45,90,135 Degree Angle Welding Magnet

  • 【2PCS 75LBS WELDING MAGNET】: 5"X2 pcs with 75 lbs weight limit, ,The center hole on the magnets allows you to easily grab the weld magnets，high quality strong magnets sticks solidly to any metal object.
  • [Perfect Angle] The arrow welding magnets can hold the material at 45°, 90° and 135° ，Arrow Angle Welding Magnets easily angle and hold your metal projects together before fusing the pieces together to allow hands free welding..
  • 【easy to use】: Whether you are welding, soldering, assembling, marking off, or installing pipes, these magnetic welding holders are convenient..
  • 【Stainless Steel Material】: Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion.
  • [Worry-Free After-Sales Service] Arrow Welding Magnet set has very good magnetism, and we also provide high-quality after-sales service. If you are not satisfied, you can request a full refund for replacement products, please rest assured to buy.
Check Stock