Categories

Best High Impedance

Aviation Headset GA Dual Plugs to Airbus 5 Pin XLR Headset Adapter

  • Connect General Aviation (GA) Dual Plugs Headset to Airbus 5 pin XLR.
  • Dual GA Plugs (3/16" Mic plug ( PJ-068) and 1/4" (PJ-055) Speaker plug ).
  • This cable does not convert impedance! It is not for connecting low impedance military headset to high impedance intercom..
Check Stock

RUSSOUND #3615-604034 SDB-6.1 Dual Source 6 Pair Speaker Selector

  • Designed for high audio quality and long-term reliability.
  • Provides impedance matching and automatic overload protection Compatible with high-power amplifiers.
  • Bypass mode allows direct speaker switching when using remote impedance-matching volume controls.
Check Stock

Russound SS6.2 Speaker Selector

  • Designed for high audio quality and long-term reliability.
  • Provides impedance matching and automatic overload protection Compatible with high-power amplifiers.
  • Bypass mode allows direct speaker switching when using remote impedance-matching volume controls.
Check Stock

Russound ALT126R Decora Volume Control White/Light Almond

  • Designed for high audio quality and long-term reliability.
  • Provides impedance matching and automatic overload protection Compatible with high-power amplifiers.
  • Bypass mode allows direct speaker switching when using remote impedance-matching volume controls.
Check Stock

Taramps MD 5000.1 1 Channel 5000 Watts Rms Car Audio Amplifier 2 Ohm

  • Mono: 1 x Taramps Electronics MD5000.2 Full Range 2 Ohms 5000W Amplifier.
  • Operation Class: Class D Channels - 2 Ohms: 5000W.
  • Input Impedance: 10K Ohms Output Impedance: 2 Ohms.
  • MD 5000.2 amplifier from Taramp's is intended for high-performance automotive audio systems and high-performance engineering.
Check Stock

Mr DJ PROA5000 Pro Series 2-Channel, 5000 W Peak Pro Audio Amplifier

  • Mono: 1 x Taramps Electronics MD5000.2 Full Range 2 Ohms 5000W Amplifier.
  • Operation Class: Class D Channels - 2 Ohms: 5000W.
  • Input Impedance: 10K Ohms Output Impedance: 2 Ohms.
  • MD 5000.2 amplifier from Taramp's is intended for high-performance automotive audio systems and high-performance engineering.
Check Stock

Dynaudio Esotan System 372 6-1/2" 3-Way Component Speakers

  • Features: Three-way system, 6.5in MSP woofer, 1.1in soft-dome tweeter, 3in MSP midrange, Frequency response: 40Hz – 20kHz, and System impedance: 4-ohm..
  • MF172 Woofer: Nominal Impedance: 4-Ohm, Recommended Frequency Range: 40-4000Hz, Power Handling: 120W RMS | 1000W Transient. Total Diameter: 6.85", Mounting Diameter: 5.31", Mounting Depth: 2.63"..
  • MF171 Midrange: Nominal Impedance: 4-Ohm, Recommended Frequency Range: 160-14000Hz, Power Handling: 120W RMS | 1000W Transient. Total Diameter: 3.93", Mounting Diameter: 2.97", and Mounting Depth: 1.69"..
  • MT171 Tweeter: Nominal Impedance: 4-Ohm, Recommended Frequency Range: 1300-20000Hz, Power Handling: 120W RMS | 1000W Transient. Total Diameter: 2.48", Mounting Diameter: 2"-2.18", and Mounting Depth: 1.13"..
  • X372 Crossover: Crossover Frequency: 500Hz/3600Hz, Nominal Impedance: 4-Ohm, Power Handling: 200W (MF172), and Dimensions: 1.69" x 4.09" x 6.89"..
Check Stock

Superlux D112/C Harmonica Microphone Dynamic Harmonica Microphone

  • Sensitivity: -48dB V (4mV-Pa) at 1000 Hz.
  • Cable: 20 foot cable, one-forth inch M Phone connector.
Check Stock

HiLetgo 5pcs EI14/EI-14 Audio Coupling Isolation Transformer Audio Transformer 600:600 1:1

  • Advantages:high pressure and stable performance.
  • Alternating-current impedance value : 600.
Check Stock

American Bass Black 3 Way Electronic Crossover w/Remote Bass Knob ABX 3.1A

  • This Listing Includes: (1) Crossover (1) Bass Knob.
  • Supply Voltage: 11-15V DC - Input Current: 0.3A Max - Distortion: 0.01% THD.
  • Frequency Response: 10Hz- 50KHz - 3dB - S/N Ratio (A Weighted): More than 95dB - Separation: 60dB.
  • Front High-Pass (x1): 35-400Hz - Front High-Pass (x20): 700-8KHz - Rear High-Pass (x1): 35-400Hz - Sub Low-Pass: 45-250Hz.
  • Input Impedance: More Than 10K Ohms - Output Impedance: Less Than 1K Ohms - Output voltage Level: 8 Volts Max.
Check Stock

Fishman Neo-Buster Humbucker Soundhole Acoustic Pickup & Feedback Buster

  • Neodymium humbucking magnet structure for warm humbucking tone and exceptional string balanceIntegrated feedback-buster for high-volume playingLow profile, high impedance design needs no batteryFlexible surround reduces howling in high volume situationsEasy installation with no alteration fits most standard acoustic guitars with 3-7/8 or 4 diameter soundholeTool-free installation.
  •  This humbucking magnetic soundhole pickup produces a warm and full sound while also greatly reducing hum and unwanted interference.
  • It also shares the same neodymium magnet structure as the award-winning Rare Earth pickup for exceptional string balance and incredible acoustic clarity.
  • Its low-profile, high impedance design needs no battery.
  •  When you need to play in high-volume situations, the integrated soundhole cover reduces the build-up of energy inside the guitar that often leads to uncontrollable howling.
Check Stock

Behringer MicroHD HD400 Ultra-Compact 2-Channel Hum Destroyer

  • Removes AC hum and noise - fast, easy and reliable.
  • Breaks ground loops safely, while keeping highest sonic quality.
  • 2 independent channels for 2 mono or 1 stereo signal.
  • Automatically converts unbalanced to balanced signals without signal loss.
  • 3-Year Warranty Program* 200 Watts of powerful, high-quality sound for audiences of up to 500 people. Input impedance approximately 500 k omega, Output impedance approximately 600 omega.
Check Stock

Fluke PRV240 Proving Unit

  • PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment.
  • Sources both AC and DC steady-state voltage - supplies 240 V DC/AC.
  • A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool.
  • Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers.
  • Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact.
Check Stock