Categories

Best High Lift Jack

Drywall Lift Panel 11' Lift Drywall Panel Hoist,Jack Lifter Jack Rolling Caster Wheel Drywall Lift Construction Tools

  • 【Easy to assemble and disassemble】The drywall lift is very solidly built , The Drywall Panel Hoist is easy to assemble and disassemble without tools. The Panel Hoist folds up nicely with good weight to strength ratio.drywall lift Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster.
  • 【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Drywall Panel Hoist allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them. Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster drywall lift.
  • 【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Drywall Panel Hoist does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cableof the Panel Hoist.Panel Hoist Jack Lifter Jack Rolling Caster drywall lift Panel Lift Panel.
  • 【150Lbs Load Capacity】This drywall lifter is made of heavy duty steel.The Drywall Panel Hoist ensures its long life span. The Panel Hoist is load capacity is about 150 lbs.Lifter Jack Rolling Caster drywall lift Panel Lift Panel Hoi....
Check Stock

BAOSHISHAN 3 Ton Double Ram Bottle Jack 6-1/2\ to 16-1/2\ Lifting Range Portable Hydraulic Jack with Carrying Case

  • [HIGH LIFT] - This high lift bottle jack have a double ram design with extension screw. The car jack fully extends up to 16.54" on the basis of constant capacity and volume. The double extending ram makes it easy to put the jack in place and it extends enough to easily raise the high clearance cars..
  • [DOUBLE RAM] - The double-ram design means you can get it into places where a traditional 2-4 ton jack would fit, but you have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height. Combined with the extension screw, this fully extends to over 16 inches (about 10" of total lift)..
  • [WITH CARRYING CASE] - The bottle jack with case is easy enough to store away in the vehicle or garage. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it. And the color of the compact box is random, BLACK or GRAY..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 3 ton jack to lift cars. It allows the hydraulic jack to be adjusted to accommodate desired work height. The diameter of the top is 0.8 inches..
  • [STURDY STRUCTURE] - Although the main bottle is only slightly larger than a 12oz soda can, and the overall weight is about 5.5 ....
Check Stock

OTC 1540 4-Ton Capacity Fork Lift Jack

  • OTC's 4-Ton (8000 lb.) Capacity Fork Lift Jack features a low starting height of 2-5/8 inches and a maximum lifting height of 16-1/4 inches.
  • Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces.
  • Jack features include high-quality seals and high-strength steel construction.
  • 30 inch long handle, with stop, makes for easy maneuverability around the shop or workspace.
  • Rugged construction and high-grade materials ensure quality performance over the lifetime of the jack.
Check Stock

VIVOHOME Steel Hydraulic Motorcycle ATV Lift Jack Hoist Stand 1500 lbs

  • COMPACT AND FUNCTIONAL - This compact VIVOHOME hydraulic jack makes it safe and easy to service your motorcycle or ATV through a simple lifting....
  • HIGH-QUALITY MATERIALS - The heavy-duty and solid steel frame of this VIVOHOME motorcycle lift jack comes with a red and black powder-coated finish.
  • SAFETY FIRST - With a 3-position safety lock mechanism, the lift jack can easily fix your vehicle in different angles and increase its stability.
  • EASY TRANSPORT - Equipped with a handle in the package, this lift jack is easy to lift and save your labor.
  • It is designed with 4 wheels, including 2....
  • MANUALLY OPERATED - Through the hydraulic operation, the lifting platform can be easily lifted all off-road vehicles or scooters to a height of 15....
Check Stock

Flieeya 4T Exhaust Air Jack Inflatable Car Jack Off-Road Exhaust Air Jack for Vehicle SUV Car Truck Rescue

  • ...E】The lifting capacity of this air jack is 4 tons (8800 lbs). It can lift an incredible 31.5-inch (800 mm) height without other equipment. It is designed for Extreme Off Road Drive to easily change the tires in minutes.
  • 【RELIABLE MATERIAL】The exhaust jack is made from sturdy 1000 Denier Nylon, industrial grade high strength polyester fiber, coated both sides with environmental friendly tear-resistant PVC material. High fabric density, together with appropriate thickness finally make sure of strong durability, sturdiness, and longevity..
  • 【DOUBLE INFLABLE SYSTEM】The inflatable jack exhaust is specially designed with double inflatable systems. One is to use the exhaust of your car to inflate the air jack, the other is to use the air compressor, more convenient (no air compressor included in this item).
  • 【OFF ROAD HELPER】The lift jack is the best choice for recovery in road, sand, mud and forest, will safely lift your vehicle up out of a rut or bog in seconds for jeeps, trucks, cars, and other vehicles when a single wheel falls into a ditch. No worry for long-range adventure.
  • 【CONVENIENT TO CARRY】Accessories of the lift air jack are designed to be stored in the carrying bag with two protective blankets to protect the air lifting jack from sh....
Check Stock

WIILAYOK Lawn Mower Lift Jack with 882 Lbs Weight Capacity for Garden Tractors and Lawn Mowers, Riding Mower Lift with Manual Handle & Power Tool Extension Handle

  • High Weight Capacity: With a weight capacity of 882 lbs, this lawn mower lift jack is capable of lifting a wide range of garden tractors and lawn mowers. You can easily perform maintenance and repairs on your equipment without worrying about its weight..
  • Easy to Use: The riding mower jack features a manual handle and a power tool extension handle, making it easy to lift your lawn mower or garden tractor. The lift jack can be adjusted to different heights to accommodate various equipment types. Additionally, the lift jack can reach up to a 45° angle, allowing you to easily access the underside of your equipment..
  • Sturdy and Durable: This lawn mower lift is made from high-quality materials and has a powder-coated finish that provides excellent resistance to rust. It can withstand heavy use in all weather conditions, ensuring it will last for years to come..
  • Safe and Secure: Lawn mower jack features a stable base and locking mechanism to ensure the safety of both the user and the equipment being lifted. You can be sure that your lawn mower or garden tractor will stay securely in place during use..
  • Foldable Design: WIILAYOK riding mower lift is designed to be foldable, making it easy to store when not in use. It takes up minimal space in your garage or shed....
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

AUTOINS Scissor Jack Set- 3 Ton (6614 lbs) Car Jack Kit Auto - Smart Mechanism with Hand Crank/Wrench/Lug Wrench Thickened Base for Car SUV MPV

  • SPECIFICATION - Maximum lifting weight: Lift range from 3.9 inches to 15.3 inches.
  • Maximum lifting weight: 3.0 tons (6,614 pounds).The Lift Jack Net weight 3.7 lbs (1.7kg),package weight:8lbs(3.65kg).Head / Saddle dimensions: length : 5cm /1.97inch.
  • width : 3.8cm / 1.5inch.Ratchet wrench: S=17mm.
  • L=338mm,Hexagonal fitting of jack: S=17mm..
  • UNIVERSAL CAR MODEL - Designed to fit any vehicle: sedan, coupe, SUV, MPV, hatchback, crossover, wagon and more.The Scissor Lift Jack come with hand crank and ratchet wrench to open the scissor jack and close the scissor jack. It will help you lift your vehicle more quickly with 2 handle tools..
  • MORE SAFE -For any emergency, this Scissor Jack will help you change your tire fast and easy.Thicken and Enlarged base ensure a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure..
  • Package Included - With the carry bag, Making your carrying more convenient and making the package more compact. Includes: 1x 3ton jack.
Check Stock

Donext Motorcycle Lift Scissor Jack, 1200 LB Capacity Wide Deck Hoist Stand Maintenance Bikes ATVs Garage Repair Center Stand Lift Jack, Black

  • 【Strong and powerful】This motorcycle lift jack boasts solid steel construction with a lifting capacity of 1200lb, making it sturdy and reliable for lifting heavier bikes..
  • 【Stable and secure】The extra wide platform measures 9.06” x 14.57” and provides a larger contact area with the motorcycle. The high-quality rubber pad helps prevent your motorcycle from slipping or sliding while being lifted..
  • 【Durable and lasting】The solid steel structure of the motorcycle lift jack is coated with a black powder finish that is oil-resistant, grease-resistant, and dirt-resistant, ensuring durability and longevity..
  • 【Versatile and useful】With a dynamic lift height range of 3 1/2 to 14 3/4, this center jack can be used to lift a wide range of motorcycles, such as street bikes, cruiser bikes, and adventure touring motorcycles..
  • 【Easy to operate】The motorcycle lift jack comes with a 7/8 socket and a special crank handle, making the lifting process easy and convenient. Simply rotate the handle to lift your motorcycle quickly and effortlessly..
Check Stock

Toro Part # 127-6666; 2020 and up Zero Turn Bulldog Mower Jack

  • REPLACeS MULTIPLE JACKS: The patented Triple Lift design fits cars, trucks, motorcycles, ATVs, even transmission, lawnmowers and snowmobiles!.
  • WIDE LIFT RANGE: From a low of 5-1/2 inches (with the round saddle removed) to a high of 17-1/2 inches with the round saddle installed..
  • ULTRA STABLE AND SECURE: Thanks to a wide wheelbase, the Triple Lift offers stability well beyond the average floor jack. For even more security, use the included tie-down loops with your tie downs to secure the load..
  • NO NEED FOR JACKSTANDS: Slide the included safety bar in place and the Triple Lift is locked in the raised position..
  • STRONG AND DURABLE: tested and certified to meet or exceed ASME and PALD standards..
  • Patented design features both a removable lift saddle and padded lift rails.
  • Flexible design allows the Triple Lift to adapt to multiple types of vehicle frames.
  • Easily lifts cars, trucks, ATVs or removing/replacing transmissions or differentials.
  • Locking safety bar holds jack in place once raised eliminating the hassle of supporting a lifted vehicle with jack stands.
  • Lifting capacity of 4,000 pounds and meets or exceeds ANSI standards.
Check Stock

ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector

  • SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack.
  • BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly.
  • Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage.
  • USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs).
  • LARGE SIZE: Fits beveled 5.5-inch steel lift cups bowl saddles on standard hydraulic floor jacks.
  • Floor jack saddle pad has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch ....
Check Stock

Cat 4 Ton All-in-One Truck Jack, Bottle Jack and Stand in One, Car Lift Equipment for Repair - 240342

  • INNOVATIVE DESIGN: All in one truck jack is just a portable jack designed to not only lift but safely hold higher vehicles like trucks, SUVs, or offroad vehicles.
  • eliminates the need for extra jack stands.
  • will lift and hold both body on frame and unibody vehicles.
  • PATENTED: The genius of this jack's design is it allows both easy and safe lifting of higher vehicles while making holding them trouble free as well.
  • the auto safety lock and riser retaining pin hold vehicle at height, eliminates the need for additional jack stands.
  • LIFT RANGE: Jack has a lift range from 11 inches to 21 inches.
  • CAPACITY: Jack has a 4 ton (8,000 lbs) lifting and holding capacity.
  • TRUSTED BRAND: If you are a fan of the big yellow and black machines, you will love the Cat branded 4 Ton All-in-One Truck Jack.
Check Stock

Stark 1100lbs Motorcycle Scissor Jack Lift Wide Stand Hand Crank w/ Dolly Bike Rack and Wheels Black

  • PREMIUM QUALITY - The heavy-duty and solid steel structure of this VIVOHOME motorcycle lift jack comes with a black powder-coated finish.
  • LARGE & ANTI-SLIP PLATFORM - The top surface measures 14.6"×9", it is large enough to raise and lower a transmission or a motorcycle.
  • MOVABLE & VERSATILE APPLICATION - The lift jack with dolly tray which has 4 steel casters can be easily move anywhere.
  • EASY TO OPERATE - It is attached with a crank handle for easy operation.
  • By rotating the metal sleeve, you can lift a motorcycle easily, saving much....
  • HIGH PERFORMANCE - With a max load capacity of 1100 lbs., the lift jack can raise motorcycle to a comfortable level for your work between 5.1"-17.7"....
Check Stock