Pallet Truck, 5500 Lb. Capacity, 21 x 48
- Loading capacity:2200lbs,Lifting height (min/max): 3.3" - 31.5"，Fork size:45" x27".
- Ldeal design with numerous possibilities makes this unit very suitable as pallet truck/scissor lift table.
- Telescopic jack composes of 3 piston rods creating light pumping force giving great rigidity.
- Truck automatically slows the descending speed when heavy goods loaded to prevent cargo damage.
- Suitable for scenarios such as assembly line handling, order picking,warehouses, etc.,high lift can meet your needs.
Check Stock
AKM F150 Lift Kit 3' Front and 2' Rear Leveling Lift Kit for 2004-2022 Ford F150 4WD 2WD
- WARM TIP: This set will raise the front of the truck by 3″ and the rear of the truck by 2″. Suitable for for 2004-2022 Ford F150 4WD 2WD.（The label on some products may not be updated in time,the product is applicable to the F150 mentioned above）.
- HIGH QUALITY: It is made of the same material as the aircraft, which is stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable..
- EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2″, the height of the car front lift is 3″, the thickness of the rear lift block is 3″, but the height of the car rear lift is 2″.Because the lifting height and kit thickness are not 1:1..
- ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level..
- PRODUCTS INCLUDE: 3″Front lift spacers x2,2″Rear lift blocks x2,Zinc Plated U-bolts x4,Nut x8. Be free to contact us if you have any questions about anything.Thank you..
Check StockSuxiDi 2PCS Auto Car Truck Service Ramps Lifts, 10000lbs Heavy Duty Hydraulic Car Ramps Lift for Car Repair
- 【STURDY MATERIAL】SuxiDi truck service ramp elevator is made of high-quality steel, and the exterior is painted to prevent rust. The hydraulic ramp is durable and suitable for all under-vehicle maintenance and inspections..
- 【MAXIMUM LOAD-BEARING】The hydraulic truck ramp can lift 10,000 pounds.
- the height of the hydraulic part can be adjusted within the range of 9.8-15in..
- 【CAR RAMP LIFT SIZE】 Bottom length: 45 inches.
- 【EASY TO INSTALL】SuxiDi heavy-duty hydraulic lift is easy to install, use and maintain. It is an ideal choice for maintenance and is very popular among auto maintenance personnel..
- 【AFTER-SALES SERVICE】If you have any questions about our car lift, please feel free to contact us. Our car ramp lift are stocked in the United States, with fast and good shipping services..
Check Stock
Mophorn 12V Dump Trailer 13 Quart Single Acting Steel Reservoir, 3200PSI Power Unit with Control Remote 12 Volt Hydraulic Pump, Black
- 【HIGH QUALITY MATERIAL FOR LONGEVITY】- This hydraulic power unit full high quality construction with high strength and hardness. Good wear resistance, durable in use..
- 【FAST START】- The high-quality hydraulic pump ensures a fast start every time and a long using period, Reduce labor intensity, improve hydraulic trailer pump work efficiency..
- 【RELIABLE QUALITY】- The electric hydraulic pump is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions..
- 【EASY TO OPERATE】- This dump trailer hydraulic pump equipped with other hydraulic tools can carry out lifting, pressure type, elbow, bending row, straightening, cutting, assembly, demolition and many other work..
- 【WIDE APPLICATION】- Hydraulic power used in applications where extending a hydraulic cylinder is needed, truck tailgate lift, scissor lift, dump trailer, lift truck, snow plow, aerial platform, road signs, material handling.
Check StockReplacement for Truck Door Steel Roller (T-Style)
- Truck Door Lift Handle - for Todco or Whiting Style Roll up Truck Door - Zinc Plated Steel (Silver).
- Whiting / Todco Box Truck Door Lift Handle.
Check StockOTC 1540 4-Ton Capacity Fork Lift Jack
- OTC's 4-Ton (8000 lb.) Capacity Fork Lift Jack features a low starting height of 2-5/8 inches and a maximum lifting height of 16-1/4 inches.
- Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces.
- Jack features include high-quality seals and high-strength steel construction.
- 30 inch long handle, with stop, makes for easy maneuverability around the shop or workspace.
- Rugged construction and high-grade materials ensure quality performance over the lifetime of the jack.
Check StockReadylift 66-5002 ReadyLift 2.0 Tall Rear Kit Silver
- FITMENT: Lift kit for 2005 - 2019 Toyota Tacoma (2WD & 4WD). Does NOT fit 5-Lug or TRD Off-Road models. Simple installation in 2 to 4 hours for....
- TACOMA SUSPENSION LIFT: This leveling kit will sustain your original ride quality with minimal effect on your truck’s center of gravity to maintain....
- INCREASE GROUND CLEARANCE: Raise your Tacoma 3" in the front and 2" in the rear. Improve the look of your truck and increase ground clearance,....
- ALL HARDWARE INCLUDED: Comes with 2 x 3" aircraft billet front strut spacers, 2 x 2" aircraft billet rear lift blocks, 4 extended zinc-plated U-bolts.....
- TECHNICAL NOTES: Please note: Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry. Wheel alignment is recommended....
Check StockReplacement for Garage Door 4 Inch Pulley w/Fork Bolt and Nut (Sold Each) (200 LB Load)
- Truck Door Lift Handle - for Todco or Whiting Style Roll up Truck Door - E-Coated Steel (Black).
- Whiting / Todco Box Truck Door Lift Handle.
Check StockECOTRIC Truck 2\ Hitch Game Hoist 400LB Big Game Hunting Deer Hoist Winch Lift Gambrel Set 360 Degree Swivel Hitch Mounted
- The deer lift is made of extremely strong square steel tubing. The top portion of the truck deer lift swivels to lift the deer or hog into your truck bed and also locks in place to provide a secure stand to hang the catch while cleaning..
- This Game Hoist has a convenient 360 degree swiveling shaft with locking pic system to move your game from cleaning to the bed of your truck..
- Fits your truck's 2" receiver hitch,2 Fit together steel sections held by locking pin.
- Note:The instruction about the parts have some defects(Some parts are not needed, but the instructions say say they are), but that has little effect on the assembly.If you have any questions about the instruction, please contact us on Amazon, ,we will reply in 24 hours..
Check Stock
VEVOR Manual Winch Stacker, 4.7\ - 57\ Height Range, 23.6\ Length x 19.7\ Width Platform, Steel Lite Load Lift Winch, Hand Winch Lift Truck, 394 lbs Capacity Material Lift for Shipping Facilities
- Manual Cable Winch: The manual winch stacker can quickly raise and lower the platform. It has a reversible handle that can be used to raise or lower the platform by 1.4" with each complete revolution. And it’s portable..
- High-quality Steel Frame: For extra strength and long service life, this hand winch lift truck is made of wear-proof steel. Ensure the security of goods during transportation and lifting!.
- Adjustable Platform: The aluminum platform of the material lift measures 23.6 x 19.7 inches (W x D) and has a 4.7" - 57" high service range. And it can be locked in any position to enable off-loading..
- Counterbalance Weight Design: The Counterbalance weight design keeps the unit from tipping with heavy loads. This lift truck has a load limit of 394 lbs, weighs 88.2 lbs. It is ideal for lifting and transporting loads. You can use it at ease with a high-security coefficient..
- Wide Application: We can use hand winch lifts in warehouses, factories, shipping facilities, supermarkets, and other industrial environments. For example, lift and transport loads from delivery trucks to docks or inventory storage systems..
Check Stock
2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!
- ...UT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
- Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal agai....
Check StockReadyLift 67-5012 Sway Bar Bracket
- COMPATIBLE WITH 1995 - 2022 Toyota Tacoma (2WD 4WD). *Does NOT fit 5-Lug models..
- CONTENTS: (2x) High-Strength Steel Rear Lift Blocks - 9/16 Pin, (4x) Square Bend 9/16th U-Bolts, Installation Hardware, Installation Instructions,....
- TECHNICAL NOTES: 1 inch rear suspension lift. | *Please note that our lift block kits are designed to be installed directly to your truck's factory....
- INSTALLATION: Designed to be installed simply and easily by placing our lift blocks between your axle and OE leaf pack, and then securing everything....
- BENEFITS: Improves the look of your vehicle and increases rear-end ground clearance, allowing you to fit larger custom rims and tires. Due to their....
Check Stock
Pro-LifT H-7090 900 Lbs Hand Truck Foldable, Blue
- Ergonomically Design to Reduce Muscle Fatigue – The Pro-Lift hand truck is ergonomically designed to provide a powerful lift of heavy item loads. It will help reduce your chances of getting muscle fatigue that you may have while lifting or loading heavyweight goods at any time and anywhere..
- L-Shaped with Horizontal Loop Handle Design for Easier Maneuverability – The heavy-duty dolly has a horizontal loop handle design that is intelligently created to offer you multiple secure gripping points when the hand truck is upright and when tilted back. Due to the Handle's L-shaped features, it will give you the ability to control a hand truck with less strength..
- Heavy-Gauge Steel Tubular Frame to Prolong Product Longevity – The utility truck is made of high-quality steel with welded joints that make it resistant to rust corrosion. The large frame also provides you with a sturdier carry of bigger bulkier items. It will enable you to hold goods, boxes and cartons up to 700 lb. and 900 lb. (315 kg and 405 kg) capacity but lightweight (155.54 lb.) to fold flat for storage at the same time..
- Pneumatic Tires for Seamless Transportation - The hand truck features 4 secure and air-filled tires engineered with 360-degree swivel functionality. The lightweight ....
Check Stock
