Categories

Best High Machining Speeds

TOOLDO 45 Degree Lock Miter Router bit 1/2 Shank,Lock Miter Woodworking Tools Set (for 1/2\

  • TOODLD 45 degree lock miter router bit 1/2 inch shank is suitable for all range’s router(handheld router and table router), such as TOOLDO, KOWOOD, Bosch, DeWalt, Makita,Milwaukee, MNA,Porter & Cable, Skil, Ryobi, Black & Decker.
  • Carbide-Tipped Bits- Carbide tipped bits retain their cutting-edge hardness at high machining temperatures generated by high cutting speeds and feeds that reduce machining cycle time.
  • Shear Angle Technology-TOOLDO router bit has shear angle technology, which can improve cutting quality, speed and extends service life. The inclined angle facilitates the removal of wood chips.
  • Widely application-Join boards at a 90 degree angle with an interlocking profile for a perfectly aligning joints.Ideal for 45 Degree Lock Miter joint, and cutting all types of wood,MDF, particle board, plywood compact panel. Perfect for the production of cabinet doors, closet door ,window, wood drawer, window, cupboard and other woodworking projects.
  • Affordable – Direct Sale from manufactory, provide the best cost but remain in great quality.If you encounter problems during use, please contact customer service, we will help you answer in time.
Check Stock

Lovejoy Size NB12B Needle Bearing Universal Joint, 1\ Round Bore and 1\ Round Bore, 1/4\ x 1/8\ Keyways with Setscrew, 2.00\ Outer Diameter, 5.44\ Overall Length

  • Single pin and block universal joint for applications with up to 25 degrees angular misalignment and speeds up to 6,000 RPM.
  • Needle bearing design for applications with continuous high rotational speeds.
  • AISI 1144 carbon steel for strength and durability.
  • Bored hubs fit onto shafts without the need for machining.
  • Operating temperatures range from -30 to 212 degrees F.
Check Stock

KEO 55705 Solid Carbide Single-End Countersink, TiALN Coated, Single Flute, 60 Degree Point Angle, Round Shank, 3/8\ Shank Diameter, 5/8\ Body Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining").
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

Lovejoy Size NB8B Needle Bearing Universal Joint, 5/8\ Round Bore and 5/8\ Round Bore, 3/16\ x 3/32\ Keyways with Setscrew, 1.25\ Outer Diameter, 3.75\ Overall Length

  • Single pin and block universal joint for applications with up to 25 degrees angular misalignment and speeds up to 6,000 RPM.
  • Needle bearing design for applications with continuous high rotational speeds.
  • AISI 1144 carbon steel for strength and durability.
  • Bored hubs fit onto shafts without the need for machining.
  • Operating temperatures range from -30 to 212 degrees F.
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

TOOLDO Router Bits Set 15 Pieces, 15 Pcs 1/4 Inch Shank with High-End Carbide Router Bit Kit, for Woodwork Project

  • TOODLD router bit sets 15 Pieces 1/4 inch shank is  A light set of daily essentials for the family.Universal 1/4 inch shank fits all models of routers,(either handheld or benchtop router table) such as TOOLDO, KOWOOD, Bosch, DeWalt, Makita,Milwaukee, MNA,Porter & Cable, Skil, Ryobi, Black & Decker.
  • Carbide-Tipped Bits- Carbide tipped bits retain their cutting-edge hardness at high machining temperatures generated by high cutting speeds and feeds that reduce machining cycle time.
  • Shear Angle Technology-TOOLDO router bit has shear angle technology, which can improve cutting quality, speed and extends service life. The inclined angle facilitates the removal of wood chips.
  • Widely application-Ideal for edging, trimming, veining, and grooving all types of wood,MDF, particle board, plywood compact panel. Perfect for home improvement, cabinet doors, wood flooring, paneling and and other carpeting projects.
  • Easy to use and carry -TOODLD router bits set 15 pcs is an artwork hanging on the wall，convenient to carry and use,a set of light household daily necessities.If you encounter problems during use, please contact customer service, we will help you answer in time.
Check Stock

High Performance Finger Joint Router Bit 1/2 Inch Shank Glue Cutter Woodworking Milling Cutter Kit Drill Bit Router Assembly for Professionals and Beginners

  • TOODLD router bit sets 12 Pieces 1/2 inch shank is  the first router bits exquisite package for beginners.Universal 1/2 inch shank fits all models of routers,(either handheld or benchtop router table) such as TOOLDO, KOWOOD, Bosch, DeWalt, Makita,Milwaukee, MNA,Porter & Cable, Skil, Ryobi, Black & Decker.
  • Carbide-Tipped Bits- Carbide tipped bits retain their cutting-edge hardness at high machining temperatures generated by high cutting speeds and feeds that reduce machining cycle time.
  • Shear Angle Technology-TOOLDO router bit has shear angle technology, which can improve cutting quality, speed and extends service life. The inclined angle facilitates the removal of wood chips.
  • Widely Application-Ideal for edging, trimming, veining, and grooving all types of wood,MDF, particle board, plywood compact panel. Perfect for home improvement, cabinet doors, wood flooring, paneling and and other carpeting projects.
  • Easy to Store and Carry -The wooden box is sturdy and durable, which can protect the drill bit intact during transportation.Sticker guidance, very suitable for novices.If you encounter problems during use, please contact customer service, we will help you answer in time.
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

Ruland OD21/33-AT Oldham Coupling Disk, Black Acetal, Bore, 1-5/16\ or 33.3mm OD

  • Ruland oldham couplings have a zero-backlash balanced design for reduced vibration at speeds up to 4,500 RPM. They can accommodate high amounts of parallel misalignment (up to 10% of the hub OD)..
  • Acts as a mechanical fuse stopping power transmission during a torque overload. User can combine clamp or set screw hub with inch, metric, keyed, or keyless bore for a high level of customization..
  • Made from acetal for higher torque and torsional stiffness capabilities than nylon..
  • Proprietary hub machining process for smooth interaction between the hub and disk allowing for significantly longer life..
  • Ruland oldham coupling disks are RoHS3 and REACH compliant.
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock