Categories

Best High Module Low Shrinkage

NR2-25 Electric Overload Relay Adjustable Motor Protection Thermal 50-60hz(17-25A)

  • ◇ ANTI-INTERFERENCE---Made of the high quality miniature optocoupler, the relay module is of anti-interference ability, stable performance.
  • ◇ STABLE AND RELIABLE---Adopting 9.5mm black barrier terminal and standard 30A terminal, the relay module is stable and reliable.
  • ◇ HIGH/LOW LEVEL TRIGGER---The high/low level trigger of the relay module can be switched.
  • ◇ DC5V/DC12V/DC24V---There are 3 styles for you: DC5V, DC12V, DC24V, you can choose one according to your preference.
  • ◇ MAIN FEATURE---Product Name: Optocoupler Isolation Relay Module.
  • Output Capability: AC 250V/30A, less than DC 30V/30A.
Check Stock

Sound Module, Support Any Format Recording Module 10 Second Recording Easy To Use for Record Video

  • Sound sensor module have small volume and low output noise, the fixed gain is 20dB, support 3.3v and 5v.
  • Low power consumption of sensor is easy to control, more stable and more efficient.
  • The sound sensor is suitable for assembly, and installed on various small equipment like microphone and robot.
  • Microphone sound sensor module possess small size, more stable performance and simpler installation.
  • This module uses professional microphone amplifier IC, which possess high sensitivity.
Check Stock

Nordic BLE 4.0 nRF51822 Controller Chip Bluetooth Module Small Size 18.5 x 9.1x 2.0mm 5 Pack

  • YTX51822-S01 is a high performance ,low power radio transmit and receive system module based on Nordic BLE 4.0 nRF51822 controller chips..
  • It has the smallest volume package in the industry, the size is 18.5 X 9.1X 2.0, suitable for most applications which pay more attention to the size..
  • The module integrate the complete standard low energy Bluetooth 4.0 protocol stack S110 drive..
  • Customer's MCU is connected to the module by UART port, it will automatically send a broadcast code after the module starts..
Check Stock

YWBL-WH Relay Module One Way 30A Optocoupler Isolation Relay Module High Power Relay High/Low Level Trigger YYG-2(5VDC)

  • ANTI-INTERFERENCE---Made of the high quality miniature optocoupler, the relay module is of anti-interference ability, stable performance.
  • STABLE AND RELIABLE---Adopting 9.5mm black barrier terminal and standard 30A terminal, the relay module is stable and reliable.
  • HIGH/LOW LEVEL TRIGGER---The high/low level trigger of the relay module can be switched.
  • DC5V/DC12V/DC24V---There are 3 styles for you: DC5V, DC12V, DC24V, you can choose one according to your preference.
  • MAIN FEATURE---Product Name: Optocoupler Isolation Relay Module.
  • Output Capability: AC 250V/30A, less than DC 30V/30A.
Check Stock

FINDER 90.26 Relay Socket, 250V, 10A, DIN Rail

  • Output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect whether there is a vibration environment, call the police..
  • This module is compared with the normally open type vibration sensor module, vibration trigger for longer periods of time, can drive the relay module..
  • Product vibration, the vibration switch instantaneous disconnection, output the output high level, the green light is not bright.
  • Product no vibration, vibration switch is closed on state, the output terminal output low level, the green light is lit.
  • Used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.
Check Stock

The Someday Birds

  • ...oved fracture toughness enhanced PLA filament 1.75mm 1kg which has an excellent combination of toughness and rigidity, which can fully meet your needs for high tenacity functional parts printing projects.
  • [Neat Spool & High Purity PLA Filament]-iSANGHU 1.75 mm filament PLA is made of high purity corn starch with low shrinkage and superb layer bonding. Full mechanical winding and strict manual examination, guarantee the filaments neatly and easy to be fed. There's less pulling and twisting..
  • [Clog-free & Bubble-Free]-Filament 1.75 pla is Designed and Manufactured with Clog-Free technology which makes filament outflow smoother, and come out homogeneous. High-quality Shiny printing filament pla with a glossy appearance, good shaping, no bubble, no warping, and easy to print..
  • [Dimensional Accuracy & Consistency]-Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm. You don't have to worry about the deformation of the overall structure due to the large change of diameter and uneven printing..
  • [Low Shrinkage & Good Layer Adhesion]-iSANGHU PLA filament for 3d printer is a worry-free product that has great bed adhesion, very consistent color, and dimen....
Check Stock

Acxico 2 pcs ESP8266 ESP-01S + 5V WiFi Relay Module Smart Home Remote Control Unlock Board

  • This module uses genuine relays and normally open interfaces. High stability and low power consumption..
  • Strong driving ability, stable and reliable performance. High efficiency, fine workmanship, and durable..
  • Add one more ESP-01S module. This smart relay module is based on the ESP-01S WIFI module design. It can be used to DIY your own smart switch. It can be remotely controlled by the mobile phone APP and provides APP and LUA source programs. It's easy to use right away..
  • The package includes：2 pcs ESP8266 ESP-01S Relay module, relay WIFI smart socket (with ESP-01S).
  • We are very grateful for all customers’ opinions to improve sales, if you are not satisfied, please contact us to find the best solution.
Check Stock

BIQU Filament Break Detection Sensor Module 3D Printer Accessories with 1M Cable for 1.75mm Filament Extruder Material Run-Out Detector for 3D Printer (Transparent)

  • ❤【Function of Filament Detection Module】 To detect Filament in 3D printer run-out,pause detection,it automatically stops the 3D Printer when the filament runs out.Optimize the inlet port/outlet port of the material detection module, to reduce the resistance of the feeding material..
  • ❤【Filament Break Detection Module】When there is material, the level signal of the detection port should be high level. When there is no material, the level signal of the material port goes low, and the system detects one. If the high-to-low transition is determined, the material is considered exhausted and a pause command is executed..
  • ❤【Detection Method】The material detection module uses the level jump detection method..
  • ❤【Filament Size】 It Suitable for 1.75mm Filament with 1m cable which making your printing work goes smooth and relieved..
  • ❤ 【After-Sales Guarantee】We support high quality after-sales Service,any questions or feedback please contact us,no matter what refund or resend. We will satisfy with your request..
Check Stock

DC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub

  • Parameters: DROK audio amplifier board working voltage is DC 8-26V, can be powered by 12V, 24V.
  • output power is 15W stereo (24V 8ohm)/ 10W stereo (12V 8 ohm), if connect 4 ohm or 2 ohm speaker, the power will be automatically limited to 15W..
  • Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the class D power amp module is with high efficiency of over 90%, general harmonic distortion noise is less than 0.2%, low quiescent current and noise suppression..
  • Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
  • Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
  • available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity leve....
Check Stock

Inland 1.75mm Blue PETG 3D Printer Filament Dimensional Accuracy +/- 0.03 mm - 1kg Spool 2.2 lbs

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the....
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more....
Check Stock

CDM324 Microwave Module, 24GHz 15m Doppler Radar Smart Microwave Body Induction Module Single Channel Switch Intelligent Sensor Module

  • 【Contactless】 Non-contact detection, moving object detecting. Using Doppler radar technology, Compared with the traditional infrared feeling PIR, with the penetrating detection capability..
  • 【Wide application】 This frequency sensors module's transmitting frequency is 24GHZ, can be widely applied in business, industries, word controlling etc.This is a microwave sensor module for detecting moving objects and human body. Widely used in human body sensing lighting system, anti-theft alarm system..
  • 【Parameter】 Advanced low consumption PHEMT oscillator, Provide various frequency range standards: -UK,-F,Operating Temperature:-20~60℃..
  • 【Independence】Independent transmitting and receiving route, can get the big gain. The module has many advantages such as high sensitivity, long sensing distance, wide sensing angle, high reliability, wide range of operating voltage..
  • 【High performance】 Single channel operation. High sensibility, high flexibility, low cost, operating distance is 15m. Not influenced by temperature, humidity, noise, air flow, dust, ray etc, adaptive to terr....
Check Stock

Audio-Technica Instrument Condenser Microphone (ATM350U)

  • ...ument and positioned to stay where you want it – the gooseneck won’t flop around no matter how aggressively you move the instrument as you play. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case. Features: Low-profile mic design for minimum visibility Crisp, clear, well-balanced microphone response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Unmount universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone Rugged Unmount 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise Interchangeable elements available for hyper cardioid and omnidirectional polar patterns Included violin mount with hook-and-loop fastener provides an additional mounting option Specifications: ....
Check Stock

ICC/Intervox MEU-65PD-02-704, Microphone; 100 to 12000 Hz; 2 V; 0.5 mA (Max.); 6 mm x 5.2 mm; -70 dB

  • The sound sensor is suitable for assembly, and installed on various small equipment like microphone and robot.
  • Microphone sound sensor module possess small size, more stable performance and simpler installation.
  • Sound sensor module have small volume and low output noise, the fixed gain is 20dB, support 3.3v and 5v.
  • Low power consumption of sensor is easy to control, more stable and more efficient.
  • This module uses professional microphone amplifier IC, which possess high sensitivity.
Check Stock