Categories

Best High Performance Manifold

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

6 Way 8 Port Air Manifold, G1\\/2 Supply Port, G1\\/4-Inch Output Port, Pneumatic Air Manifold Distribution Block, Industrial Aluminum Alloy Air Compressor Manifold

  • 【High Pressure Resistant & Better Sealing】 Acrux7 air distributor block has high pressure resistance and strong sealing. Air manifold for distributing pneumatic power to multiple locations from a single source..
  • 【Precision Air Distributor】Total Size: 20.3x3x3cm/8"x1.2"x1.2"(L*W*H).
  • Ports Diameter:11mm (0.4 in). Two G1/2" inlet ports and six G1/4" outlet ports.
  • 【Easy & Fast to Connect】The air compressor is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
  • 【Industrial Aluminum Alloy】Manifold block is made of aluminum for less weight than brass and resistance to corrosion. Efficient and stable performance, easy to install and sustainable..
  • 【Excellent Air Manifold】Air manifold is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

ARB 12 Volt High Performance Twin Air Compressor & E-Z Deflator Airline Tire Inflation Kit & Air Locker Manifold Kit

  • Boost Projects Custom Kit Includes: ARB 12V High Performance Twin Air Compressor & E-Z Deflator & Airline & Tire Inflation Kit & Air Locker Manifold....
  • Air Compressor Kit Includes: Fully assembled and tested air compressor (12V). Complete wiring loom w/ Air Locker solenoid plug-in terminals.....
  • Manifold Kit Includes: Manifold body with mounting bracket. 2x 1/8_ѝBSPP ports for installation of up to 2 x Air Locker solenoids. 2x 1/4_ѝ NPT....
  • E-Z Deflator Kit: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing....
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the....
Check Stock

Small Block F-ord Intake Manifold - 351W Aluminum Carb Intake Manifold 1500-6500 Satin E42458

  • Our LowRise manifold for 351w engines is the ultimate street performance manifold for this engine.
  • Its long runner dual plane design provides the best of both worlds.
  • It provides good top end power without sacrificing bottom end torque..
  • This manifold has a number of features not found in similar competitive manifolds. It includes a rear water crossover passage which can provide for more balanced cylinder head temperatures and a cooler running engine.
Check Stock

Digital Manifold Gauge Set, Vacuum Pressure Temperature Leakage Tester for Air Conditioning Systems and Heat Pumps, HT-750

  • Quick, accurate measurement of high and low pressure with two temperature compensated pressure sensors.
  • automatic measurements of the evaporation and condensation temperature.
  • 83 refrigerants stored in the instrument: just one instrument covers all the most important refrigerants and, depending on the refrigerant, there is no need for different manifolds.
  • Equipped with a large 2 line backlit display, 2 way valve block and a suspension hook, the HVAC/R instrument enables a convenient application.
  • Including 3 hoses (blue, red, yellow), each 35.4 Inch long, suitable for all common refrigerants.The rugged housing of the digital manifold includes a frame around the display, which protects the digital manifold from impact to provides a lasting performance.Complete kit: one Digital Manifold Gauge, three hoses, two pipe clamp temperature probes. and a hard shell case.
Check Stock

Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable

  • 【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs..
  • 【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage..
  • 【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response..
  • 【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor\A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor

  • Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor "A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor.
  • This A-Team Performance air conditioning manifold fitting kit will allow you to complete the installation of your vehicle's A/C system.
  • Allow you to complete the installation of your vehicle's A/C system..
Check Stock

Dorman 615-188 Engine Intake Manifold Compatible with Select Ford Models

  • Ideal replacement - this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines.
  • Made in USA - designed, engineered and manufactured in the United States to deliver consistent quality and precise construction.
  • Proven design - features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance.
  • Complete kit - includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws.
Check Stock

MOSTPLUS 2721402401 2721402201 Intake Manifold Compatible for Mercedes C230 E350 SLK280 S400 GLK350 ML350

  • 【Fitment】— Compatible for Mercedes C230, C280, CLK350 06-09.
  • Compatible for Mercedes C250, ML450 (Only fit for 3.0L and 3.5L).
  • 【OEM Part Number】—2721402101, 2721402201, 2721402401, A2721402401.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Please check the year, make, model and trim of your vehicle in the garage before purchase.
Check Stock

E-Tuner 4

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

Physeed 139QMB Carburetor Manifold Intake Replacement for 18mm Tao Tao 50CC Carburetor GY6 49CC 4 Stroke Chinese Scooter Moped Mini Dirt Bike ATV Ruckus Racing Kymco

  • PD18 18mm Carburetor for 4 Stroke GY6 49cc 50cc Chinese Scooter 139QMB Moped for Taotao Kymco Scooter Jonway Baja Jmstar Lance NST Peace Banzer Barton....
  • GY6 50CC Carburetor for most of Chinese Made Scooters and ATV. Such as JONWAY, JMSTAR, ROKETA, SUNL, TANK, PEACE, TAOTAO, Dongfang, Kazuma, JCL,....
  • High performance Carburetor for GY6 49cc 50cc 4 Stroke engines..
  • Air Filter Intake:35mm(inner diameter), 39mm (Outer Diameter).
  • Intake Manifold side: 18mm (Inner Diameter), Intake Manifold side:....
  • Package comes with: 1pc Carburetor + 1pc Air Filter + 2pcs Fuel Filter + 2pcs Spark Plug + 1pc Intake Manifold.
Check Stock

Startzeal Carburetor Intake Manifold Joint Boot fits 1999-2004 Yamaha Bear Tracker 250 YFM250 4XE-13586-00-00

  • Replacement for Yamaha Bear Tracker YFM250 1999 2000 2001 2002 2003 2004..
  • Replaces part numbers:4XE-13586-00-00 93210-35537-00 90450-49001-00 91317-06020-00.
  • Package Includes:1x Intake Manifold， 1x O-Ring， 1x Clamp，2x Bolts..
  • This intake manifold boot with throat hoop and gaskets kit made of high quality materials, which will built to long lasting durability and prevent water and corrosion, high performance carburetor. According to factory specifications, perfect match to your original car..
  • Please confirm the model, year of your car before purchasing, If there is any problem with the product, please contact us in time, we will solve your problem as soon as possible.
Check Stock