Categories

Best High Power Laser Cutting

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • ...ine power and 10W output power, 0.08*0.08mm compressed spot enabling finer laser engraving. The laser module engraves 304 stainless steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
  • AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
  • ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving module kit protective lens can have no fingerprints, it will affect the cut....
Check Stock

SCULPFUN S30 Pro Laser Engraver with Auto-Controlled Air Assist System, 84W Laser Engraving Cutting Machine, 10W Optical Power Laser Cutter for Home Family DIY, Ultra-Thin Carving (S30 Pro Engraver)

  • ...trolled during engraving, and the engraved pattern will be smoked into a fuzzy fog. The S30 Pro is equipped with an air assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and makes the finished works more high-quality..
  • ▶【Built-in High Pressure Air Assist Nozzle】 - S30 Pro laser cutting machine is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean and smoothy..
  • ▶【High Precision Ultra-thin Linear Rail Engraving】 - S30 Pro laser engraver adopts ultra-thin laser shaping technology, the laser focus is as thin as hair, very powerful for engraving. Besides, the carving machine adopts the most accurate 0.005mm industrial linear guide, which greatly improves the engraving accuracy, and there is no wave line when engraving. When comparing small cutting details, the S30 does not have the wavy pattern that appears ....
Check Stock

ATOMSTACK X20 PRO Laser Engraver, 130W DIY CNC Laser Engraving Cutting Machine, 20W Laser Power for Wood, Vinyl and Metal, Offline Engraving, Built-in Air Assist System, 400x400mm, Honeycomb Table-F1

  • ...the engraving, only the laser power affects the engraving effect. 20W laser power, the latest exclusive technology, based on the compression shaping spot technology, four 6W laser diodes cooperate with optical mirrors to increase the laser power to 20W, and the spot can be compressed to 0.08mm*0.1mm size..
  • 【Strong cutting capability/more powerful engraving capability】Able to cut metal, like a wild beast. 12-15mm thickness solid wood board cutting off with only one pass. 256 different grayscale makes the engraving more than black only According to the different grayscale information from the picture, the laser energy is automatically adjusted to achieve the finer contrast of the finished project as well as more natural transition between colors..
  • 【Can be engraved offline, Equipped with an air assist pump】dependent operation terminal control, improve production efficiency. Equipped with an air assist pump 20W engraver is equipped with 10-30L/Min air assist pump kit, which could improve the cutting and engraving speed with the cleaner surface, as well as extending the service life..
  • 【Use your imagination to DIY your exclusive items】It can engrave on paper, bamboo, wood, plastic, leather PCB board, aluminum oxide, lacquered metal, etc. Able to e....
Check Stock

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock

ATOMSTACK A20 PRO Laser Engraver, 130W Laser Engraving Cutting Machine with Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot, Laser Cutter and Engraver Machine for Metal Steel

  • ...e promotions" and then select "Add to cart" to enjoy buy one get one free. If you order an Atomstack A20 PRO laser cutter on your mobile phone, click on "Special offers for this item" and you will receive a free 380 mm x 284 mm laser honeycomb table..
  • THICKEST CUTS BY 20W HIGHEST LASER POWER: Atomstack A20 Pro laser cutting machine is the world's first 20W optical power diode laser engraver. With the latest generation of four 6W laser coupling technology, it can cut off 15-20mm thick tungsten board as well as the 8-15mm thick black acrylic board with only ONE PASS, and even cut the 0.05mm thick stainless steel sheet..
  • MORE PRECISE ENGRAVING: Atomstack laser cutting & engraving machine with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area makes the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more delicate and natural in the overlay of black and white..
  • SMARTER ENGRAVING & CUTTING: The ATOMSTACK APP is connected to the A20 pro laser cutting machine and supports both Android and Apple phone systems. Also, it is equipped with a controller and an emergency stop button so that you can engrave completely offline. Y....
Check Stock

Under Siege

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
Check Stock

Platy for Prezi!

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
Check Stock

Sovol 3D 40W Engraving Laser Module (5W Output Optical Power), CNC Laser Head Kit with Eye Protection Design, for SV Series & Ender Series 3D Printers and CNC Engraving Cutting Machine

  • [Wide Compatibility] – 40W input, 5W Optical Power Output Modulation Board. The Laser head kit can be used on 3D printer, cutting machine, CNC engraving machine, DIY laser Engraver. Recommended application machine: Sovol SV01/SV02/SV03, Creality Ender-3/Ender-3 Pro/Ender-3 V2/Ender-5/Ender-5 Pro and Comgrow engraving & cutting machine. Not fits for 3D printers with SKR board..
  • [Ultra-fine Laser Head] – The high-power engraving speed is faster, and the accuracy is higher. 0.4-0.5mm spot size and 20mm fixed focal distance, which can easily cut 2mm thick wood, bread, acrylic and glass at once.
  • can directly engrave coated or brushed stainless steel and ceramics..
  • [Easy to Use] – As a professional engraving tool, easy to install the bracket on the back of Sovol laser module and install it on the fan cover of the printer, wire it to the motherboard, and installation is done, you can flash the firmware accordingly. No need to adjust the focus, giving you more creative works to cutting and engraving on DIY commercial signs, greeting cards, models, engraving children drawings..
  • [Eye Protection Design] – The laser protective cover perfectly protects your eyes, filters 97% UV light. You and the people around can watch laser engraving without wearing goggle....
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

ATEZR P10 Combo 60W Laser Engraver with Air Assist& Rotary Roller, 430 * 430mm Working Area, 10W Laser Power CNC Laser Engraver for PC/Mobile, Hypersonic Laser for Wood/Metal/Acrylic etc.

  • ... Laser Technology】ATEZR P10 60w Laser Engraver has 10W laser output power. The laser focus area is reduced to 0.08*0.06mm, which can cut 10mm wood board and 6mm black acrylic at one time.ATEZR P10 laser cutter can cut up to 18mm wood board and 30mm acrylic board. It can combine precision engraving and high energy cutting. The working life of the laser module can reach 30,000+ hours.
  • 【Multiple Connection Modes】ATZER laser cutting machine has 4 connection modes. You can not only connect to PC, mobile phone/tablet APP, but also connect to touch screen and WLAN. You can download APP from App Store/Google Play Store and use your mobile device to take photos and upload to APP directly to start engraving. ATZER laser cutting and engraving machine will bring you a new DIY control experience.
  • 【Customer Service】We will provide you with a 30-day no-questions-asked money-back guarantee, 2-year warranty for quality issues and lifetime technical support for your Atezr products. You can always contact our support team for a fast and effective solution. Customer service is available 24/7 online.
Check Stock

ORTUR Laser Master 3 with Foldable Feet, App Control 10W Laser Engraver and Cutter Machine, Laser Engraving Machine for Wood and Metal, Laser Spot 0.05x0.1mm, Engraving Area 400x400mm

  • .... Exposure Duration Detection and Limitation.
  • 5. Voltage and Current Safety Control System.
  • [Powerful 10W Output Power]: Ortur Laser Master 3 adopts dual-compression diode technology to achieve true 10W laser power. Its cutting penetration and accuracy are twice of ordinary lasers which can cut 20mm pine board and 30mm acrylic sheet. 0.05*0.1mm ultra-thin square compressed spot makes the engraving effect more refined and outstanding..
  • [Faster Speed Laser Engraving Machine]: This Laser Cutter uses the latest upgraded 11th Generation of Laser Motherboard and the V2.0 Series Smart Laser Firmware. The 10W laser module comes with Integrated Air Assist, Dual Fans, and Foldable Focal Gauge all in only 235g Weight, which can work very well at a high speed of 20000mm/min under precision engraving and high-energy cutting, saving you over half the time as other similar brands..
  • [ALL-Metal Structure and Folding Design]: OLM3 Laser cutter is made of aluminum alloy, the modular structure is convenient for users to assemble quickly. The foldable feet use a more stable tilting structure....
Check Stock

20W Laser Module Kit for 3018 CNC Router Machine, IKLESTAR 5.5W Optical Power 12V 450nm Laser Head for 3018 Pro/3020 PLUS, Engraving Tool for Wood and Metal DIY

  • 【Excellent 20W Laser】The optical power of laser module is 5.5W. It has 0.08mm sharp compressed focal point and 0.01mm engraving accuracy. The cutting speed is faster, and the engraving accuracy is higher.
  • 【Fixed Focus & Powerful】The fixed focus distance is 20mm. At the same power, this laser module can cut 4mm wood perfectly at once. It is ideal for engraving and cutting many different materials such as plywood, bamboo, cardboard, acrylic, MDF, etc..
  • 【Long Service Life】Equipped with high-quality aluminum heatsink and cooling fan, this can help the heat dissipate faster and ensure the module works continuously. This laser module can work at full power for 8 hours. The service life can be up to 10,000 hours.
  • 【Widely Applicable】Our laser module is compatible with LaserGRBL, LightBurn and most engraving software. LaserGRBL software is compatible with Windows system, LightBurn is compatible with Mac OS and Windows system. Compatible with engraving machines and CNC milling machines 3018 series.
  • 【Customer Service】We are proud of our customer service and providing 1....
Check Stock