Best High Pressure Fuel Pipe
FST Performance RPM350 FloMax 350 Clear Anodized -6/-8 AN Port Fuel Filter/Water Separator System
- High fuel flow capabilities and extremely low fuel flow restriction coupled with highly efficient 4 micron filtration.
- Designed for use in gasoline, racing fuel, ethanol, and methanol in a wide variety of motor sports applications and engineered for either suction or pressure side mounting.
- Multiport design allows unused fuel ports to function as a fuel system drain, regulator mount, fuel pressure gauge port, flows 300 gallons per hour with a filtration efficiency of 4 microns and burst pressure for this unit is 250 PSI.
- Filter measurements are 4.25 inch height, 3 inch width and 3.75 inch depth.
- unit weight is only 19 ounces and features 1/2 inch NPT (pipe threads) ports.
- made of solid billet aluminum to eliminate porosity, leaking or air intrusion.
Check StockJoywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)
- 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
- 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
- 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
- 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
- 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
- it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check StockA-Premium Electric Fuel Pump Module Assembly with Pressure Sensor Compatible with Cadillac Escalade 2015-2019 & Chevrolet Tahoe 2015-2019 & GMC Yukon 2015-2019, Replace# 13513342, 13582493
- Electric Fuel Pump for 2014-2015 Kia Soul.
- Notes:It's coming with Sending Unit and Float..
- FUNCTIONS - Suck the fuel from the fuel tank, pressurize it and then deliver it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure. Guaranteed supply of continuous fuel to the injector.
- Fuel Pump Assembly DOES NOT come with pressure sensor, the original black pressure sensor on the top of the assembly must be reused at time of installation.
- Fuel Pumps are low noise pump, better driving comfort, balancing cost and reliability to meet different needs.
- IMPORTANT NOTE - Please make sure to match the exact part numbers between this part and the part that you are replacing. Contact your mechanics, or send us a message to make sure it matches exactly in case of doubt before purchasing.
Check StockQuick Fuel Mechanical Fuel Pump For Sbc
- Shut-off pressure pre-set from 6.5 to 8 PSI.
- Inlet and outlet tapped for 1/4 pipe thread.
- Rugged construction provides continuous high RPM operation.
- Not for use with fuel injection systems or alcohol and methanol fuels.
Check StockUniversal Electric Fuel Pump Kit for All 12V Cars Trucks Boats Carburetor Lawn Mower, DC 12V (3-6PSI) Fuel Pump+ 2M 5/16" ID Fuel Line + Fuel Filters + 10pcs Hose Clamp
- Output Pressure is 3-6 psi, Pressure : 0.032-0 .045 MPA.
- which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel..
- - : Fits 5/16 "Oil Pipe, 5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient..
- : You Will Get A Universal 12V (3-6PSI) Electric Fuel Transfer Pump + 2m/79-Inch Reinforced Fuel Pipe + 5/16-Inch Fuel Filter + 10 Hose Clamps. The kit fit all 12 Volt Cars (such as Toyota, Ford, Honda, Mazda, and any other suitable car), Trucks, Boats & Generators, Lawnmower..
- : The wall thickness is 3.2mm. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance..
Check Stock12V Low Pressure Universal Heavy Duty Gas Diesel Inline Electric Fuel Pump HEP-02A 2.5-4 PSI Metal Solid Gasoline Diesel Engine Motorcycle Carburetor Lawn Mower
- Inline Fuel Pump Inlet & Outlet: 5/16 inch, Internal Valving to Prevent Back Flow.
- Compatible Electronic Devices All 12 Volt Cars,Trucks,Boats & Generators,Fit for Toyota,Ford,Honda,Mazda,Lexus,Infiniti,Hyundai,KIA And Any Other Suitable Car Truck,Boat,Motorcycle,Carburetor, Lawn Mower,Agricultural ATV,Generators.
- The function of the fuel pump is to suck the fuel out of the fuel tank, send it to the fuel supply pipe after being pressurized, and cooperate with the fuel pressure regulator to establish a certain fuel pressure..
- Movement Material: 100% Copper Coil(Does not Contain Aluminum).Size: 5.24 x 3.74 x 2.95 inches. Package Include:1X Fuel Pump..
- Slother aim to providing you with better products and services. You can contact us first for any problem or concern, your problem will be figured out with our support..
Check Stock9.85-Foot/3m Length Stretchy 1/4 Inch ID Fuel Line+20pcs 1/3\ ID Hose Clamps for Lawn Mower Tractor Kawasaki Kohler for Briggs & Stratton motorcycle snow blowers Small Engines
- Product name: ID Fuel Line Kit with 10PCS 2/5" (11mm) ID Hose Clamps..
- Thickened pipe wall design: The fuel pipe is divided into three levels: inner pipe, middle layer and outer pipe. The inner diameter is about 1/4" (6mm), the outer diameter is about 0.53" (13.5mm) and the wall thickness is about 0.16" (4mm)..
- Product material: the inner tube is made of rubber, and the middle layer is made of fiber thread. The hose clamp is made of spring steel.
- Product advantages: comfortable appearance, smooth and flat.
- high and low temperature resistance, wear-resistant rubber fiber layer can be woven, can make the hose withstand greater pressure, used for connection, fixation, and ensure its stability..
- Scope of application: suitable for small engines: tractors, lawn mowers, snow machines, power equipment, etc..
Check StockCATUDIY Intake Pipe Valve Cleaner Machine for Car Engine Fuel System Cleaners, Fuel Cleaning Tool Automotive Engine Carbon Deposit Cleaner 110V Valvetronic System Walnut Powder Sand Carbon Deposition
- ... loop. Walnut powder will impact the carbon deposits on the inner wall of the intake pipe. After thousands of impacts, carbon deposits will be clear thoroughly.
- Safe & Efficient -- As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion different from a pollution-caused chemical intake valve cleaner.
- Integrated Design -- Walnut sand can be sprayed and recycled simultaneously. Built-in dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut powder residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
- Easy to Use -- Using this engine carbon deposit cleaner after turning off the engine. Turn the crankshaft to close the intake valve, clean one intake tube at a time, and 6 cylinder engine should be cleaned one by one (6 times) and so on. Note: (Package not included walnut powder and high-pressure air pump).
Check StockKIPA 5/16\ Inch ID Fuel Line Set - 2 Meter / 6 Foot 5/16\ Inch Fuel Line + 4 Pcs 5/16 Inch Fuel Filters + 20 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines
- ...fuel, prevent blockage of carburetor & Fuel pump & Fuel Tank, transmiss Steady clean fuel flows and keep engines Running at the top performance...
- Hose Clamps: They are Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage, make your fuel line mounting all the safe..
- Super Pressure rating and permeability. Each KIPA Fuel Line sections are strictly tested to ensure the durable safe and reliable use. KIPA fuel line reduce permeability we will save money in lost fuel, save the environment big-time and most of all, They are the best-cost performance, you really deserve.
Check StockDICMIC 496 Fuel Tank Filter Assembly with Wrench Replacement for Gasoline and Diesel Water Separate 30 Micron Max 25 Gpm 150 Psi with 1” NPT Top Cap Replace# B10-AL
- [COMPATIBLE WITH FUEL TYPE] Fits common fuels such as unleaded gas, diesel, fuel oil, up to 20% biodiesel and related additives..
- [FUEL FILTER ELEMENT] Keeping a clean 496-5 filter in your vehicle can reduce damage done to your engine and other fuel delivery components. 30 microns, provide high flow rates and superior filtration efficiency, protect fuels from particles such as rust, sand, dirt and water. With protective sheet to prevent the filter element from being destroyed or deformed by pressure..
- [TOP CAP] With 1" NPT pipe fittings inlet and outlet marked at the top of the cap..
- [HYALINE BOWL] Use 495-4 fuel tank filter bowl, makes it easy to visual monitor the fuel flow, the fuel flow will slow down when you need to replace the element. Drain valve installed at the bottom to drain water..
- [FEATURE] Additional matching wrench and tape for easy installation and replacement. Flow rate max 25 gpm. Working pressure up to 150 psi. Gravity flow rate is approximately 5 gpm..
Check StockLeadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp
- ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
- ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
- ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
- ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
- ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check StockWhamisa Fresh Cactus Bouncy Serum New Novel Deep Skin Moisturization and Nourishing Serum Featuring 99.47% Opuntia Ficus-Indica Cactus Extract 1.1 Fl Oz
- ★Powerful Functions--The system is not only characteristic of high and low pressure cleaning function. The non-dismantle fuel injector cleaner kit....
- ★Wondeful Design: The non-dismantle cleaner Autool C100 has a special handling one-way valves to seal up gas and durable pressure regulating valves.....
- ★ EFI-Electrenic Fuel Injection System-- There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with....
- ★Wide Range of Application: The injector clean kits of C100 include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light....
- ★The Advantage of Autool C100-- Can operate non-dismantle cleaning to Fuel System,it Can operate cleaning Air Induction System, Optional pipe....
Check StockFXTUL Fuel Injector Cleaner, Fuel System Cleaner Air Intake System Fuel Injector Nozzle Throttle Body Cleaner for Gasoline Diesel Cars with Carrying Case Non-dismantle
- ... 【EFI-Electronic Fuel Injection System】Electronic Fuel Injection System has two types, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI..
- 【COMPLETE TOOL SET】Most cars and light trucks of the European Union, Asia, and the United States can use this fuel system cleaner because it is equipped with various types of adapters to meet the needs of different models..
- 【SAFE AND QUICK CONNECTION】The throttle body cleaner has a one-way valve treated with a special process, which has good airtightness. In addition, there is a quick connection joint, which is treated with anti-corrosion and wear resistance. Don't worry about being corroded by the cleaning liquid.
- 【ATTENTIVE SERVICE】There is a clear and concise product manual and a portable plastic box for you, which is convenient to store the tools. And you can carry them out anywhere with this portable toolbox. ☆☆☆☆☆For damage caused by n....
Check Stock