Categories

Best High Pressure Fuel Tube

KATUMO Gasoline Siphone Hose, Gas Oil Water Fuel Transfer Siphon Pump, Portable Widely Use Hand Fuel Pump, Fuel Transfer Pump with 2 Durable PVC Hoses

  • ...acting & inserting liquids like oil gas and water. And an air pumping hose and adapter for inflating air into tires etc..
  • ✓ SPECS: Gas Syphon Pump with intake & discharge tubes: 9” - 2 Hoses (with black connectors): each 50”/127cm, OD: 1/2” ID: 11/32” – Dipstick tube: 48”, OD: 1/4” ID: 1/8” – Air pressure tube: 15”, OD: 7/16” ID: 1/8”.
  • ✓ QUALITY: Durable hard plastic fluid pump provides perfect pressure with rapid siphoning transfer, and thick plastic hoses to ensure no leakage or slops - Rubber dipstick tube transfers oil without melting from heat – High-quality acid & water chemicals resistant equipment..
  • ✓ DESIGN: The gas siphon hand pump has Smooth action handle with 2 long flexible red hoses that reaches anywhere – Extractor dipstick tube sucks oil from any vehicle - Easy Assemble/Disassemble of the fuel siphon pump is great for efficient cleaning..
  • ✓ USES: Easy large hand vacuum pump with intake & discharge transfer system for motor oil changes, overfilled tanks, off season storage, refueling empty tank from gasoline container, draining transmission petrol fuel, diesel & gas from cars, trucks, tractors, snow blowers, boats, lawnmowers & outdoor power equipment, or draw water from aquarium tanks, unclog plumb....
Check Stock

Universal Car Turbo Charger Manual Boost Controller 1-30 PSI Manual Adjustable Boost Controller - Black

  • Material: The turbocharger pressure regulating valve is made of high-quality aluminum, and the surface is anodized, which is not easy to rust, high temperature resistant, durability and practicality and long service life.
  • Easy to install: It is easy to install, cut the turbo vacuum tube, install the tee, one end of the controller is connected to the vacuum tube, and the other end is connected to the pressure relief valve.
  • Function: The pressure regulator valve adjusts air pressure, improves engine performance and reduces fuel consumption. When the turbine starts, an extremely high pressure is generated inside.
  • Scope of application: Suitable for most turbocharged and supercharged cars.
  • Customer Service: If you are unsure about our products, please contact us through Buyer Information. We will provide you with a solution within 24 hours..
Check Stock

X AUTOHAUX 17113556 Car Fuel Pressure Regulator Vacuum Line Tube for Chevrolet for Buick for GMC for Cadillac 4.8L 5.3L 6.0L

  • Fitment: for Hummer H2 2003, for GMC Sierra 1500 2002-2004, for GMC Yukon 2000-2005, for GMC Yukon XL 1500 2000-2005, for GMC Yukon XL 2500 2000-2005, for Chevrolet Tahoe 2000-2005, for Chevrolet Avalanche 1500 2002-2005, for Chevrolet Silverado 1500 1999-2004, for Chevrolet Silverado 1500 HD 2001-2003, for Chevrolet Suburban 1500 2000-2005, for Chevrolet Suburban 2500 2000-2004, for Cadillac Escalade 2002-2004, for Cadillac Escalade EXT 2002-2004..
  • OEM Part Number: 17113556. Please check your part number before placing an order, to ensure a proper fit..
  • Function: The tube is used on the fuel system to make sure the engine's usage..
  • Durable Material: Fuel pressure regulator vacuum tube made of ABS plastic, nice characteristics and good reliability. Durable and long service life..
  • Easy Installation: The fuel injection pressure regulator tube is a special car product. Direct replacement and perfect fit. (No instruction included).
Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

  • 【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
  • 【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
  • 【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
  • 【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
  • 【Warranty】Three months limited warranty & Free lifetime technical support..
Check Stock

Brass Inverted Flare Fitting Tube Nut, Brake Line Plug, 5/16\ OD, 5pcs

  • Tube nut for use with inverted flared tubing.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering..
  • Not for use in potable drinking water applications.
  • Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld..
Check Stock

2.6 Gallon Metal Tank, Jerry Can - (10L Green)

  • ...ry strong and durable. The portable filler tube is made of professional PET material, which has excellent corrosion resistance and fuel resistance, and can be freely bent, making it easier and faster to refuel..
  • 【With safety vent and labor-saving handle】 The 2.6 gallon gas can has a vent hole to prevent negative pressure from flowing backwards, and the vent hole improves the liquid transfer efficiency! The handle is easy to lift and you can easily add fuel. Save time and effort when refueling. It is very convenient to carry in the car for emergency rescue..
  • 【Easy and safe to use】The oil filling pipe is equipped with a filter, which can effectively filter impurities or foreign objects, etc., making the oil safer. Safety screw air release valve, anti-corrosion, anti-rust, anti-aging..
  • 【Multipurpose Gasoline Bucket】The gasoline bucket is suitable for motorcycles, cars, SUVs, UTVs, ATV boat trailers or other vehicles. Suitable for diesel, gasoline, motor oil and other fuels..
Check Stock

SunStar Propane Heater Infrared Positive Pressure Straight Tube, 175000 Btu 40L

  • ...r. LOW MAINTENANCE: No ceramic parts to break, or replace. Not thermocouples to replace. Emitter tubes do not glow cherry red, therefore are not fatigued to the point of premature failure..
  • HIGH OUTPUT SERIES. PH-40 HO.28,000 – 40,000 BTU.10′ heater approximately 12′ x 12′ area mounted 8 to 12 foot high.
  • Gas Pressure at Manifold: Natural Gas – 3.5″ W.C. / L.P. Gas – 10.5″ W.C..
  • Gas Connection Size – 0.5″ N.PGas.T. 1/2″.
  • Gas Inlet Pressure: Minimum Maximum Natural 4.5″ W.C. 14.0″ W.C. L.P. 11.5 W.C. 14.0 W.C..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

ACDelco Professional 32103 25 ft Bulk Reel of 5/16 in Fuel Line/PCV/EEC Hose

  • Nitrile tube that is spiral reinforced for enhanced durability.
  • NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.
  • Vacuum rating of 24 in/Hg for sizes less than 12 in I.D., and 10 in/Hg for sizes 12 in to 34 in I.D. at ambient temperatures.
  • Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications.
  • Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.
Check Stock

ACDelco Professional 32102 25 ft Bulk Reel of 1/4 in Fuel Line/PCV/EEC Hose

  • Nitrile tube that is spiral reinforced for enhanced durability.
  • NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.
  • Vacuum rating of 24 in/Hg for sizes less than 1?2 in I.D., and 10 in/Hg for sizes 1?2 in to 3?4 in I.D. at ambient temperatures.
  • Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications.
  • Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.
Check Stock

ACDelco Professional 32104 25 ft Bulk Reel of 3/8 in Fuel Line/PCV/EEC Hose

  • Nitrile tube that is spiral reinforced for enhanced durability.
  • NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.
  • Vacuum rating of 24 in/Hg for sizes less than 1/2 in I.D., and 10 in/Hg for sizes 1/2 in to 3/4 in I.D. at ambient temperatures.
  • Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications.
  • Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • ...diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pressure release & easy fuel recovery. The connectors are ma....
Check Stock