Categories

Best High Pressure Globe Valve

MTM Hydro Ball Valve for Pressure Washer Gun, Foam Cannons, High Pressure Power Washer Shut Off Valve Plated Brass 3/8” Female BSP 3000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Plated Brass Ball Valve for pressure washer guns. 3000 PSI Max Pressure rating. Max Temp 176 degrees Fahrenheit..
  • PLATED BRASS - Ball valve pressure washer made from plated brass, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female BSP Inlet x 3/8" Female BSP Outlet..
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock

Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System

  • ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
  • ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
  • ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..
Check Stock

Johnson Controls VG7882ET Series VG7000 Bronze Globe Valve, Three-Way Mixing, Brass Trim, Union Sweat End Connection, 1/2\ Valve Size, 1.8 Cv

  • Elbow globe valve with rising stem and threaded bonnet for on/off actuation and flow control (throttling) in a pipeline.
  • Bronze valve body and disc for strength and corrosion resistance.
  • Pounds per square inch (gauge) (psig) rating of 200 for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP).
  • Threaded bonnet for reduced risk of leakage.
  • Female National Pipe Taper (NPT) threads on both ends for connecting to male threaded pipes.
Check Stock

TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI

  • The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4000 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 1/4’’ quick coupler plug + 1/4’’ male NPT thread.
Check Stock

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

  • High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
  • Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
  • The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
  • The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
  • If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock

Slingshot SUP High Pressure Inflator Valve

  • High Pressure Adaptor for quick inflation.
  • Compatible on most SUP brands and inflatable products.
  • Connects to any high pressure shreader inflator.
  • The Slingshot High Pressure SUP Inflator Valve fits with the Halkey Roberts Valve. The best way to determine if the Slingshot inflator valve works with your inflatable craft is to check the valve and look to see if there are 8 square continuous key holders. The Slingshot HP SUP Inflator Valve is com.
Check Stock

Dante Products FP.GV.PTR Pewter Floor Plate for Dante Globe Valve

  • Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
  • 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
  • The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.
Check Stock

Yaeccc 4500PSI Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
Check Stock

Air compressor pilot unloader valve with muffler Vent Rolair 131B 125-150 psi

  • ✅【Product Description】This is a pressure switch, control valve with a single port connection manifold. Air compressor pressure switch is similar to the regular single port pressure switch, but this switch is equipped with heavy duty 26A contacts to provide a longer lasting switch in demanding applications..
  • ✅【Pressure Switch Features】Air compressor switch is a universal pressure switch replacement, convenient to replace the broken one..
  • ✅【Excellent Material】100% Brand new and high quality. Pressure switch control valve is Made of high quality material, with long mechanical life..
  • ✅【Specifications】Type: pressure sw....
Check Stock

Esnbia Shower Kit, Shower Faucet Set（Valve Included) with 6-Inch Rain Shower Head, Single-Handle Shower Trim Kit, Matte Black

  • IMPORTANT WARNING:Not compatible with other brand valve and cartridges.The old shower valve must be removed if install this kit..
  • 6-INCH HIGH PRESSURE RAIN SHOWER HEAD: Enjoy a waterfall like shower experience, with modern excellence in performance. offer consistent powerful shower even under low water pressure, that this will bring you an high water pressure..
  • CUPC CERTIFICATION PRESSURE BALANCE VALVE : Pressure balance valve cartridge, brass valve body, the flow of cold and hot water can be adjusted through the settings on the left and right sides. Designed for use with standard 1/2" U.S. plumbing connections. Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18 ASSE 1016/ASME A112.1016/CSA B125.16..
  • ANTI-CORROSION--Multi-layer Matte Black finished, this can resist daily scratches, corrosion and tarnishing in humid shower room.The elegant, one-piece curved handles complement any decor.
  • SHOWER PACKAGE INCLUDE: shower valve with valve trim, 6 inch rain shower head, 6" shower arm.
Check Stock