Categories

Best High Pressure Nylon Tubing

Value Plastics Y250-2 Black Nylon Tube Fitting, Barbed Wye, 3/16\ (4.8 mm) Tube ID (Pack of 25)

  • Wye branch fitting has angled inlets to reduce friction and turbulence.
  • Nylon for strength, flexibility, and resistance to abrasion, crushing, and cracking.
  • 200 series barbed fitting creates a secure seal with flexible tubing in high-pressure applications.
  • Meets standards set by RoHS for hazardous materials.
Check Stock

TL TOOLEGIN 3/8\ OD High Pressure Nylon Tubing for Outdoor Misting System 65.6ft/20m Misting Line for Patio Patio Mister for Cooling Water Mister Hose for Umbrella

  • 3/8" OD High Pressure Nylon Tubing 65.6ft/20m..
  • Suitable for outdoor cooling and misting systems..
  • Anti-aging, high pressure resistance, suitable for high flow nozzles..
  • Special high-pressure pipes for artificial fog, humidification and cooling..
Check Stock

Aquaus StayFlex Stainless Steel Hose - NSF Certified 3 Year Warranty 54 Bidet Hose

  • NSF Certified – 54″ Long StayFlex Stainless Steel Spray Hose designed for use with a pressurized Hand Held Bidet or Diaper Sprayer..
  • Stays Completely Flexible When pressurized. The Internal super-strong polymer hose is infused with a braided nylon mesh that will not inflate or burst....
  • Both Ends are standard 1/2″ female Hose connections. Washers included – 11mm OD Patent Pending..
  • Designed specifically as a high-pressure Hand Held Bidet hose with a burst rating of 270 psi, over 3 times the average home pressure – 3-Year....
  • NOT designed for use as a shower hose because the high pressure 11mm diameter inner tubing has a small diameter with lower water flow..
Check Stock

Koolance FIT-L10x13-BK Rotary Elbow Compression Fitting for 10mm x 13mm (3/8in x 1/2in) *Black*, G 1/4 BSPP

  • Typical Application: Air Brake systems except where temperatures exceed +200°F tubing, or where battery acid can drip on..
  • Pressure: Maximum operating pressure of 150 psi..
  • Temperature Range: -40°F to +200°F(-40℃ to + 93℃).
  • Used With: NT100 Nylon Tubing - SAE J844 Type A and B..
Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock

uxcell Pneumatic Tubing, 4mm OD x 2mm ID Air Brake Tubing Nylon Air Line Tube 5m Clear

  • Advantage: Nylon PA6 is strong, lightweight and has a very low moisture absorption rate compared to other nylon,it will remain more flexible, which in turn extends its service life..
  • Material: Nylon Tubing made in Nylon PA6, It always can maintain good resistance to penetration and impact resistance at low temperatures of -40 Celsius Degrees.2.6Mpa working pressure.
  • Feature: Pneumatic Tube Measures 0.08-inches inside diameter by 0.16-inches outside diameter by 16.4-feet total length. thin tube wall providing higher flow rates and working pressure.
  • Please Note : Nylon tubes has hardness. You can use hot water or a hot air gun to soften tube or change to the tube shape you want..
  • Application: Nylon tube widely use in: air, water, chemicals, lubricants, instrument lines, irrigation control systems,textile mills, vacuum systems,oscillation insulator and other industries..
Check Stock

Sunpro CP8216 StyleLine Mechanical Oil Pressure Gauge - Black Dial

  • Kit includes mechanical oil/water temperature gauge, electrical voltmeter, and mechanical oil pressure gauge.
  • 2-in black face dial with white numbers and red pointer.
  • Includes a 72-in capillary tubing with 5/8-in national pipe thread and 1/4-in, 3/8-in and 1/2-in adaptors and 72-in nylon tubing with 1/8-in and 1/4-in national pipe thread fittings.
Check Stock

Iliving ILG-250 Fan Misting Kit, 200 PSI, Nylon (Fan Not Included), Silver

  • 200 psi enclosed pump in stainless steel housing.
  • 6 0.15mm high pressure anti-drip nozzles.
  • All necessary fittings to install system.
Check Stock

mistcooling Outdoor Misting Fan System 18\ Fan - High Pressure (18\ - 2 Fans Black)

  • Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor use - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
  • 1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..
Check Stock

LASCO 19-5217 Compression Fitting with Stainless Steel Gripper Sleeve Nut and 3/8-Inch, Nylon

  • Nylon compression fitting with integral sleeve nut.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock

Orbit DripMaster 65199 Flag Dripper, 1-Gallon Per Hour, 10-Pack

  • SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
  • PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
  • DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
  • ECO FRIENDLY: Provide water directly where you need it without any overspray!.
  • EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!.
Check Stock

Garden Sprinkler, Kadaon 360 Degree Rotating Lawn Sprinkler Large Area Coverage - Adjustable, Weighted Gardening Watering System

  • include : 100pcs ❤ Rich Accessories: 1* 98FT 1/4'' Tubing.
  • 2* 1/2‘’&3/4'’ Threaded Faucet Connector.
  • ❤ Three Irrigation Methods: ①Atomized irrigation, can be hung, and can be cooled.
  • ②Adjustable dripper, eight-hole water outlet, working pressure: 0.5-3Bar, wetting radius: 20cm.
  • ③Pressure compensation dripper, anti-inverted siphon, improve anti Blocking performance, constant flow during long-distance laying or pressure fluctuations, high irrigation uniformity, regular irrigation, 2 liters per hour..
  • include : 100pcs ❤ Save Water and Money: The irrigation system can automatically water after turning on the tap, which can save up to 70% of water compared to manual watering. The precision sprinkler system can slowly and accurately deliver the right amount of water to the root area where the plants need it..
  • ❤ Wide Range of Application: Irrigation kit simple installation, no need to excavate or excavate pipeline technol....
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....
Check Stock