Categories

Best High Pressure Resin Hose

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

  • 【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
  • 【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
  • 【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
  • 【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
  • 【Warranty】Three months limited warranty & Free lifetime technical support..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

SHIMANO Deore SM-BH90 Cuttable Hose - Black Front

  • Premium replacement resin coated hydraulic brake hose.
  • Stiff reinforced hose that performs under pressure, keeping your brakes sharp.
  • 2.1 mm bore diameter for excellent brake performance and response.
Check Stock

JoyFans Fuel Pressure Test Kit, TU-114 Fuel Injector Pump Pressure Tester Automotive Tool with Gauge Adapter for Schrader Test Port Fuel Injection System on Car Motorcycle Blue Case

  • Quick Inspection of Fuel System: Fuel pump pressure tester kit is used to make comprehensive fuel system check and fault diagnosis on fuel supply and fuel injection pump pressure. Quick installation and easy access to pressure readings. Automotive fuel injector tester has a 1/4" SAE female brass fitting at end of the hose, can be inserted directly into the fuel pump's standard Schrader or fuel pressure test port, or installed a tee fitting on to help splice an in-line connection..
  • Safe Fuel Recovery: Fuel pressure gauge features shock-resistant rubber housing and dual color scale dial, ranging from 0-10 bar (0-140 psi) for easy and accurate work on both American and metric systems. High precision 3-1/2" gauge easily holds pressure values and has convenient pressure reset button with 16" drain hose for safe fuel recovery. 15" built-in flexible hose adapter has 300 psi W.P, can be connected to fittings for fuel pressure test..
  • Scope of Application: JoyFans fuel injection pressure tester kit covers a variety of gasoline engine cars, motorcycles, trucks, SUVs, ATVs, RVs with modern Schrader test port fuel injection systems but Bosch, CIS Jetronic, Throttle Body System on GM vehicles. Custom-made toolbox bases on the shapes and sizes of all tools to keep th....
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A Car HVAC Refrigerant Recharge Kit Auto Air Conditioning U Charging Hose Low Pressure Measuring Meter with 1/4 Fittings Can Tap Quick Coupler 23 Long

  • AC U CHARGE HOSE: Freon charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing....
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to....
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and....
  • MEASURE PRESSURE AND RECHARGE R134A: Start the car, open AC to MAX. Clockwise twist T handle to close can tap, connect the quick coupler and car AC....
  • SATISFACTORY CUSTOMER SERVICE: This air conditioning U hose gauge is very simple and easy to use, dynamic pressure measurement and R134A refrigerant....
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Measuring Meter 1/4" Fittings Can Tap Quick Coupler, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly.
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve).
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of piercing type re....
Check Stock

CMTOOL Radiator Pressure Tester Kit with Universal Rubber Adapter, Updated Coolant Pressure Tester Kit Coolant Vacuum Refill Kit, Automotive Cooling System Pressure Tester Kit with Carrying Case

  • 【Upgraded Multifunctional Cooling System Pressure Tester Kit】The radiator pressure tester kit includes everything you need to quickly and easily test vehicle radiator system leaks and refill coolant, improve vehicle service life, and keep your vehicle running smoothly. Thanks to its universal rubber adapter, the coolant pressure tester master kit is compatible with almost all domestic and imported vehicles on the market. So whether you are a DIY-er or a professional, this set has you covered..
  • 【Durable Radiator Pressure Tester with Good Airtightness】The radiator pressure tester uses high-quality aluminum pump cylinders instead of ordinary plastic pump cylinders, 21" rubber nylon resin hoses and brass fittings to ensure durability and good airtightness. The coolant leak detection kit can quickly find Whether there is abnormal leakage (About 10 minutes). The accurate shockproof meter (3 inches), the dial uses color code design to make the data clear and easy to read. (0-35psi/0-2.5bar).
  • 【Car Coolant Vacuum Refill Kit with 47.24-inch Transparent Hose】The transparent coolant filling hose is convenient for observing the supply status of the coolant, and the joint is equipped with a brass filter to avoid the inhalation of metal or other impuritie....
Check Stock

POHIR Pressure Washer Hose 50 ft with 3/8 Inch Quick Connect, Kink Resistant High Tensile Wire Braided ,with 2 pcs M22 14mm Adapter Set , 4200 PSI Power Washer Hose

  • 【Pressure Washer Hose 50 ft】- 50 Foot power hose is high tensile wire braided, it's durable and heavy duty, able to support quite high working pressure. Inner tube is reinforced with synthetic rubber. Its innovative high-tech materials and processes can extend the service life and are safe to use, suitable for household cleaning & commercial use..
  • 【Pressure Washer Hose 4200 psi】- MAX working pressure of this high pressure washer hose can reach 4200 PSI, burst pressure is up to 16000 PSI. Max working temperature is 140℉ / 60℃. Flow rate is 2.5 GPM to 5 GPM. It's designed to be compatible with most brands of power washers..
  • 【3/8 Quick Connect Pressure Washer Hose】- Both ends of this power hose are equipped with 3/8" quick connector, which is not only easy to connect & disconnect but also helps connect firmly to the pressure washer without being easily shaken, damaged, rusted or leaked. Warm Tips: it's a pressure hose, not a garden hose. Suitable for pressure washer only..
  • 【Kink Resistant Pressure Washer Hose】- The combination of high-quality materials and high-tech craftsmanship brings excellent kink resistance. It's easy to carry, drag and roll up. Warm Tips: For ease of movement and storage, please lay the hose flat to its full lengt....
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • ...diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pressure release & easy fuel recovery. The connectors are ma....
Check Stock

POHIR Power Washer Hose 125FT, High Pressure Washer Hose with 3/8'' Quick Connector, High Tensile Wire Braided Hose with 2 Quick Connect Kits Compatible M22 14 mm, Hose for Pressure Washer 4200 PSI

  • Pressure Washer Hose125 FT - The pressure washer hose 125 feet is high tensile wire braided, it's durable and able to support quite high working pressure. Inner tube is reinforced with synthetic rubber. Its innovative high-tech materials and processes can extend the service life and are safe to use, suitable for household cleaning & commercial use..
  • Pressure Washer Hose 4200 psi - MAX working pressure of this high pressure washer hose can reach 4200 PSI. The burst pressure is up to 16000 PSI. Max working temperature is 140℉/60℃. Flow rate is 2.5 GPM to 5 GPM. It's designed to be compatible with most brands of power washers..
  • 3/8 Quick Connect Pressure Washer Hose - The pressure hose is equipped with 3/8" quick connector which is not only easy to connect & disconnect, but also helps connect firmly to the pressure washer without being easily shaken, damaged, rusted or leaked. Warm tips: it's a pressure hose, not a garden hose. Suitable for pressuer washer only..
  • Kink Resistant Pressure Washer Hose - The combination of high-quality materials and high-tech craftsmanship brings excellent kink resistance. It's easy to carry, drag and roll up. Warm Tips: For ease of movement and storage, please lay the hose flat to its full length when using it for the fir....
Check Stock

Deionized Water System, Spot Free Car Wash System, Spotless Water System For RV, Vehicles, Motorcycles, Bikes, Boats, Planes

  • ...any spots behind. Besides cars, Filterelated Deionized Water System is perfect for spot-free washing of your RV, boat, golf cart, yachts, motorcycle, bike and house windows, too!.
  • Filterelated Portable DI Water System Includes 617 FRP Tank, 5L Premium Mixed Bed Resin, High Pressure Hose, Handle Belt and 9 Product Acessories. It's easy to setup and use. Filterelated Spotless Water Deionizer System For Car Wash works smarter, you will spend less time and money to get professional results..
  • Filterelated Spotless Car Wash System provides approximately 520 gallons of mineral-free and deionized water based on your water input quality. It can be filled with 5L resin to filter the water. The resin is replaceable after 520 gallons of mineral-free and deionized water..
  • When you receive Filterelated Car Washer, you need to pour 5L resin into the tank, install the parts on the tank, connect the hose to your garden faucet, then you're ready to start cleaning. If you have any questions about the spotless water system, please feel free to contact Filterelated..
Check Stock

POHIR Pressure Washer Hose 150 FT with 3/8 Quick Connect High Tensile Wire Braided Power Washer Hose with 2 Quick Connect Kits Compatible M22 14mm Hose for Pressure Washer 4200 PSI

  • 【Pressure Washer Hose150 FT】- The pressure washer hose 150 feet is high tensile wire braided, it's durable and able to support quite high working....
  • 【Pressure Washer Hose 4200 psi】- MAX working pressure of this high pressure washer hose can reach 4200 PSI. The burst pressure is up to 16000 PSI.....
  • 【3/8 Quick Connect Pressure Washer Hose】The pressure hose is equipped with 3/8" quick connector which is not only easy to connect & disconnect,....
  • 【Kink Resistant Pressure Washer Hose】- The combination of high-quality materials and high-tech craftsmanship brings excellent kink resistance.....
  • 【Package Include】- 1 * steel wire braided 150 foot pressure washer hose, 1 * M22 14mm female & 3/8 inch male plug , 1* M22 14mm female & 3/8 inch....
Check Stock