Best High Quality Voice Coil Wire
Soundstream T5.104 Subwoofer
- Key components that you expect from T5 still remain.
- big ass 1,000w 3” voice coil, triple-stack magnet structure, high-density Spruce pulp sub-cone, and the iconic black-on-black Soundstream spider..
- Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics | Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up.
- Non-magnetic non-resonate die-cast aluminum frame | 3” 4-layer voice coil w/ direct connect wire increases power handling | high-temperature tolerance adhesives resist thermal failure.
- Extended excursion polyether foam Surround w/ UV & chemical protection | Dual poly-cotton Suspension dampen violent accelerations | 1-pc gasket/trim ring w/ concealed mounting holes included.
- Max power (watts) 1, 800 | RMS power (watts) 900 | efficiency (1W/1M dB) 83.5Db | voice coil configuration 3″ dvc 4Ω.
Check Stock2 x BXW-124 4800 Watt 12' Subwoofer 4+4 Ohm DVC Pro Car Audio Bass
- Max Power: 2400W Per Woofer RMS Power: 1200W Per Woofer.
- Impedance: 4+4 Ohm Dual Voice Coil Voice Coil: 2.00" 4 Layer Voice Coil.
- 87.5dB EfficiencyOversaturated motor structure for increased magnetic strength 8mm top plate & vented t-yoke improves low-frequency dynamics.
- Nickel-plated spring-loaded compression wire terminals High-temperature tolerance adhesives resist thermal failure.
- poly-cotton suspension dampens violent accelerations stitched voice coil leads to prevent potential damage.
Check StockSundown Audio X-8 Series Subwoofers 800W RMS/Subwoofer (Pair X-8 V.3 D2 8' Subwoofers)
- Black Aluminum 2.5” voice coil former for superior heat dissipation.
- Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
- High strength & patented cast aluminum frame.
Check StockSA-8 V.3 D2 - PAIR Sundown Audio 8' 500W Each RMS Dual 2-Ohm SA Subwoofer
- Xmax = 14mm one-way by 70% BL | RMS Power = 300-watts | Vented magnetic gap.
- Solid Pole piece with chamfered edges for increased air powered voice coil cooling | Black Aluminum 2” voice coil former for superior heat dissipation.
- High Temperature copper voice coil wire | Spring Loaded Terminals.
- Stitched-On Tinsel Leads to prevent fatigue and failure | High strength stamped steel frame.
Check StockDS18 EXL-XX15.2DHE 15” High Excursion Car Subwoofer 4000 Watts Dual Voice Coil 2+2 Ohms (1 Speaker)
- POWERFUL BASS YOU CAN COUNT ON – EXL-XX15.2DHE delivers impressive 4000W Max Power with 2000W RMS at Dual 2+2 Ohm, once you hear it you’ll finally realize what big, rich bass sounds like..
- DUAL VOICE COIL (DVC) – Provides multiple options and flexibility to wire Parallel, Series, or Independent. While typical subwoofers have a single voice coil, the EXL.
- UNMATCHED ENGINEERING – The EXL series of subwoofers come with Three-inch black aluminum voice coil for high power handling and great efficiency to ensure top quality..
- High Excursion surround for a very high amount of xmax..
- NEVER STOP INNOVATING ATTITUDE – DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.
Check StockPair of Pioneer TS-A300D4 12” Dual 4 Ohms Voice Coil Subwoofer - 1500 Watts (2 Subwoofer)
Check StockJBL Professional JRX212 Portable 2-way Sound Reinforcement Loudspeaker System, 12-Inch
- JBL 12-Inch low frequency driver with a 2.5-Inch diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling..
- JBL 2414H-C 1-Inch polymer diaphragm compression driver improves high frequency performance as well as system reliability..
- The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region..
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating..
- Non-resonant, all-steel handles are used..
- Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
- Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage..
Check StockDS18 EXL-X8.2D 8-Inch Subwoofer,Dual 2-Ohms, 1,200W Max, 600W RMS- (1 Speaker) (EXL-X8.2D)
- ⭐POWERFUL BASS YOU CAN COUNT ON - The EXL-X6.2D delivers impressive 1,200W Max Power with 600W RMS at Dual 2+2 Ohm, once you hear it you'll finally realize what big, rich bass sounds like..
- ⭐DUAL VOICE COIL (DVC) - Provides multiple options and flexibility to wire Parallel, Series, or Independent. While typical subwoofers have a single voice coil, the EXL.
- ⭐UNMATCHED ENGINEERING - The EXL series of subwoofers come with a red aluminum frame, DVC, a paper/glass fiber cone, black aluminum 4 Layer voice coil cover, and a treated foam edge to ensure top quality..
- ⭐HIGH-QUALITY MAGNET - Settle for nothing but the best with 130 oz high strench double Ferrite magnets that produces a wider range of tones and can handle tremendous power at high volumes..
- ⭐LOW FREQUENCIES AT THEIR BEST - The EXL-XX8.2D pounds out all of the power you need and handles low frequencies response such as 40Hz-820Hz like a true 8" subwoofer. This will make you a bass head!.
Check Stock5Core 6″ inch Subwoofer Replacement Pair DJ Speaker Car Subs Audio 900W PMPO PP Cone Red, 4 Ohm, 8oz Magnet WF 672 PP 2PCS
- 6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
- 8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
- Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
- Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
- 5 Core uses highly adhesive in the assembly of the Speake....
Check StockPower Acoustik BAMF-122 Bumper-122 Car Audio Subwoofer 3500 Watts with 12-Inch Dual Suspension (2 Pack)
- 6mm Top Plate & Vented T-Yoke Reduces Voice Coil Heat.
- 1.50” 4-Layer Voice Coil on Kapton Coil Former.
- Nickel-Plated Quick-Disconnect Wire Terminals.
- Injection Moulded Polypropylene Cone w/ Foam Surround.
- Stitched Voice Coil Leads Prevent Potential Damage.
Check StockPrecision Port 2' Flared Speaker Cabinet Port Tube Kit
- ...utput amplifier & RCA/speaker line input.
- RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill.
- 1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
- BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
- 35Hz - 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle's sound system.
- One 8'' High Power 4 Ohm Subwoofer - 1.5'' Aluminum Voice Coil.
- Built-In High Output Amplifier - Bass Reflex Vent for Added Sub-Bass Response.
- Blue LED Light Behind The Grill - 250 Watts Max Power Handling.
- Blue Polypropylene Cone - RCA/Speaker Line Input.
Check StockRockville DK512 PACKAGE Dual 12' 2800w K5 Car Subwoofer Enclosure+DB12 Amplifier
- Loaded Sub Enclosure Features: Final Impedance: 2 Ohm, Peak Power Handling: 2800 Watts, CEA-2031 Compliant RMS Power Handling: 700 Watts, ¾” MDF enclosure, Bonded stapled and braced, Computer designed vents, Angled at 15 % for perfect bass alignment.
- 2″ 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire, 50 Oz High Quality Magnet.
- Amplifier Features: Rockville dB12 2000 Watt/500w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp, CEA Compliant Power Ratings (Rated at less than 1 % distortion).
- RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.), – 2 Ohm: 1000 Watts x 1 Channel, – 4 Ohm: 600 Watts x 1 Channel.
- Amp kit features: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17’ – 18 Gauge Blue Remote Cable, 17’ – 16 Gauge Clear Speaker Wire, 3’ – 4 Gauge Clear SuperFlex Ground Wire.
Check Stock5 CORE 6″ Inch Subwoofer Car Audio 300W Peak Power Sub Woofer Loudspeaker Wide Range High Power Bass Surround Sound Stereo 4 Ohm, 8oz Magnet Car Speakers with PP Cone Red, WF 672 PP
- 6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
- 8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
- Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
- Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
- 5 Core uses highly adhesive in the assembly of the Speake....
Check Stock