Categories

Best High Speed Cnc Motor

Happybuy CNC Coil Winder 6000 Circles/Min Automatic Coil Winder 400W 110V Micro Winding Machine Computer Controlled For 0.03-1.2mm Wire Large Torque Winding Machine

  • Product Parameters: Cop motor: Three phase machine 400W(1/2hp).
  • Product Parameters: Spindle motor: Brushless DC.
  • Work Efficiently: The roll spool adopts step-servo motor, be driven by the constant current circuit, completes the winding process with high speed and high precision.
  • Easy to Operate: This winding machine adopts CNC Micro-computer controller, make it easier to set the parameters.
  • Multifunction: This automatic coil winding machine adopts the latest synchronous winding a single -chip microprocessor design, more powerful, much smaller, stronger anti-interference ability. Super elevated wisdom model, it has self-inspecting functions, including the errors of the equipment, excessive speed tracking and the calibration of the speed.
Check Stock

10:1 Planetary Gearbox 1/2\(12.7mm) Input Shaft for Nema 34 Stepper Motor 3000RPM Gearhead Gear Reducer CNC Benchtop Lathe Machine (10:1)

  • 1/2" (12.7mm) Input Shaft , connect directly with motors which has 12.7mm shaft.
  • Rated 30Nm high torque planetary gearbox ,10:1 speed reduction.
  • Nema34 flang, the gearbox must be screwed on the motor with the offer 4pcs screw to keep the concentricity. Very easy to install on motors, gearbox output shaft keyway dimension 5*5*25mm.
  • Rated speed is 3000RPM, precision less than 25 Arcmin.
  • This nema34 planetary gearbox mainly matches the stepper motor to reduce speed and increase torque. Widely used in CNC field on mill,lathe,bench,packaging machine etc..
Check Stock

MaxMetal WPL Upgraded 2 Speed Gearbox with Shift Servo Spare Part fo WPL B14 B16 B24 B36 C14 C24 Remote Control Truck

  • CNC Technology. Professional design with high performance, fine workmanship, durable in use..
  • Good corrosion resistance, high toughness, easy to install. Nice DIY item for the RC model car enthusiast..
  • 2 Speeds: the low speed and high speed. Gear ratio: low speed-29:1, high speed-17:1. Dual speed motor: 28000-30000rpm..
  • 2 speed gearbox with 9g servo for WPL rock crawler rc cars parts..
  • Suitable for WPL military Truck B14/B24/B16/B36/C14/C24/C34/C44, 4WD 6WD RC car DIY modification upgrade accessories..
Check Stock

Electric Nail Drill Portable USB Efile Nail Drill Kit Professional with LED Speed Display and 3 Ceramic Nail Drill Bits for Acrylic Gel Nails Manicure Pedicure Tools Set for Home Salon Green

  • 【UPGRADED CABLE FOR ELECTRIC NAIL DRILL】：The upgraded USB cable combined a LED speed display, speed control buttons and a rotation direction....
  • 【CERAMIC NAIL DRILL BITS】: A Corn Top(Fine Grit), a Ball Barrel Top(Fine Grit) and a Needle Bit(Medium Grit) are made of superior ceramic....
  • 【ERGONOMIC ELECTRIC NAIL FILE】: The compact pen design, ergonomic, stylish streamlined nail filer is made with high technology(CNC process),....
  • 【PROFESSIONAL & HIGH-QUALITY MOTOR】: This portable electric nail efile is equipped with a powerful high-tech motor(speed up to 20000rpm) and....
  • 【PERFECT GIFT & SERVICE】: Comes with a lightweight e file, 3 pcs 3/32" ceramic nail drill bits, a 59" USB upgraded cable with a LED speed display....
Check Stock

StripMeister E2000x Wire Stripper Machine - Wire Stripping Machine Scrap Cable Stripper for Wire Recycling, 72 Pound Heavy-Duty #18 to 2000mcm wire stripping capacity with Variable Speed Control

  • Large Stripping Assembly: This wire stripping machine was built for efficient, fast, reliable, and speed-controlled wire stripping. The wire stripper weighs 72 lbs, has a voltage of 120 V, 1 HP motor, and is made from high-grade aluminum steel. The StripMeister machine wire strippers are waiting to tackle every scrap of copper wire and cable junk. From recycling heaps of common scrap in all shapes and conditions to tackling tons of thick cables..
  • Heavy-Duty Structure: All wire stripper components are precision engineered with the latest state-of-the-art, 5-axis CNC milling technology for unbeatable fit and function. A unique industry first, 1 HP DC variable speed motor coupled with a precision gear box that delivers high torque & precisely adjustable cutting speeds. It can withstand rigorous environments and last for years. Manufactured in North America to withstand punishing wire scrapping jobs of all sizes..
  • Effortless to Use: You just plug into a standard electrical outlet, feed the cable or wire into the machine, set the blade depth, and turn on the switch. The built-in "Romex" adapter strips America's most commonly used house wire 33% faster ....
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

Genmitsu CNC 3018-PRO Router Kit Milling Engraving Machine + GS-775M 20000RPM 775 CNC Spindle Motor with ER11 Collet Set

  • What You Get: Genmitsu 3018-PRO CNC router kit.
  • 1pcs CNC Spindle Motor with ER11 Collet. (Note: They will be shipped separately).
  • Premium Power Adapter: The 3018-PRO has brought safety improvements to the adapter, with CE/FCC/UL-approved. Strong built for heavy-duty and long usage performance, making input/output stably even when work for a long time or work with a laser module..
  • Offline Controller: The 3018-PRO comes with an offline controller, you can manually adjust X, Y, Z-axis without connecting to the computer and download files..
  • Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials. Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise..
  • Speed: 20000/min. Pre-installed motor noise suppression PCB provides enhanced performance. It's compatible with Genmitsu 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc..
Check Stock

RATTMMOTOR 100mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for CNC Router Engraving Milling Spindle Motor

  • Compared with the aluminium profile fixture,the accuracy is much higher, and it is hard to deform..
  • Fit for : CNC 100mm diameter high-speed spindle motor..
  • Cast aluminium fixture is much heavier than aluminium profile fixture..
Check Stock

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock

Electric Skateboard with Remote Control 350W Motor 12MPH Top Speed 10 KM Range 8 Layers Maple Longboard

  • 【GOOD RANGE AND HIGH SPEED】It has three modes and speeds for different needs' skaters. It also comes with reverse capability.Go up to max 10 Km by....
  • 【EASY TO CONTROL AND RIDE】Come with 2.4G wireless remote controller with 4 led indicators, keep you informed the skateboard battery level,....
  • 【STURDY MATERIAL】8-ply rock hard maple deck with hadle design, it has better elasticity and toughness, board without splicing, using CNC trimming....
  • 【350W BRUSHLESS HUB MOTOR】Compared with the belt drive motor, the brushless hub-motor is more reliable and less problems. Even without motor,your....
  • 【NOTICE】The lithium battery is easy enter the self-protection state and it can't be charged if the lithium battery is not charged and discharged....
Check Stock

Nema23 2N.m 57 Hybrid Closed Loop Servo Stepper Motor 2Nm 76mm+HSS57 Servo Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine

  • Name:Nema23 2N.M Servo Motor Driver CNC Kit.
  • Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed.The high speed performance and torque are enhanced in a....
Check Stock

DBXMFZW 2.4G LCD Screen Remote Control Simulation UH60 Helicopter, Single Prop Aileronless RC Drone Aircraft with Gyroscope 2 Battery 6CH Dual Brushless Motor 3D&6G Simulation Fighter Model,

  • ... ☀Using 4006 630KV brushless motor for self-stable co-drive, reducing gear agitation, with low noise, large torque, sufficient power, and high efficiency. The lock tail motor uses a special 1104 4200KV brushless motor, which has the characteristics of high temperature resistance, fast response speed, stable lock tail, and not easy to be damaged after long-term work..
  • ☀Using enlarged 4.3g metal digital steering gear, high torque, fast response, high precision, and accurate return to center, the response speed is 60°/0.05ms, which makes the aircraft fly accurately, feel good, and last longer..
Check Stock