Categories

Best High Speed Laser Engraver

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • ...s steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
  • AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
  • ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving module kit protective lens can have no fingerprints, it will affect the cutting ability, and the performance of the module decreases..
  • SPECIFIC PARAMETER DETAILS – Fixed focus: 45mm.
Check Stock

LiebeWH 1pc Laser Diode Head Engraving Emitter Blue-violet Light for NEJE 1000mW Engraver Only to Avoid Eyes IAnjuries

  • 【Professional design】Design for engraver printer machine, suitable for NEJE 1000mW engraver only.
  • 【High-quality】Long time use, carving time will last much longer than other laser head and more stable.
  • 【Features】1000mW blue-violet light laser, higher speed, support more types of materials.
  • 【Appropriate types】Can be carved items included hardwood, plastic, bamboo, rubber, leather, cut paper and so on.
  • 【Supplement】Note that laser is dangerous, it is necessary to use laser protective glass to avoid eyes injuries.
Check Stock

10W Output Laser Engraving Machine, JICCODA L1 High Accuracy 0.05 * 0.1mm Compressed Spot Laser Cutter Mini CNC Machine with 5.0 Bluetooth Technology Laser Engraver for Wood and Metal

  • [Upgraded 10W Laser mould] 10W JICCODA L1 laser engraver adopts the latest double-layer 5.5W laser technology , which can reach the speed of laser cutting up to 10,000mm/m and cut 10mm thickboard and 5mm acrylic plates at a single pass. The service of the laser module up to 10,000 hours in regular temperature..
  • [Built-in dual motors] Comparing the most laser machine has only one motors ,JICCODA L1 cutter machine master 2 motors inside laser frame in order to keep the laser engraver machine more stable while it engraving..
  • [Ultra-accuracy engraving compressed spot & fast laser cutting] 0.05*0.1mm ultra-accurate compression spot can achieve your varieties laser cutting and laser engraving for wood and metal, DIY creation activities and bring you a distinct grain pattern,vivid picture and clear-cut engraving and cutting experience. FR4 double-sided main board with glass fibre material strength the precise of our mini cnc machine..
  • [Easy assemble]The construction of high-strength aluminum alloy and ABS material makes the JIOOCDA L1 laser machine robust and stable. The laser cutting engraver has a disassembled modular design with the stable performance of the drive plate and the laser tube core with heat dissipation function. The laser engraver and cutting m....
Check Stock

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

  • 【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
  • 【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
  • 【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
  • 【Wide Compatibility and Multiple Connection W....
Check Stock

1500mw Blue Laser Diode Engraving Emitter Blue-violet Laser Diode Head Dot for NEJE 1500mW Engraver Only

  • Design for engraver printer machine, suitable for NEJE 1500mW engraver only..
  • 1500mW blue-violet light laser, higher speed, support more types of materials..
  • Can be carved items included hardwood, plastic, bamboo, rubber, leather, cut paper and so on..
  • Long time use, carving time will last much longer than other laser head and more stable..
  • Note that laser is dangerous, it is necessary to use laser protective glass to avoid eyes injuries..
Check Stock

Aufero Laser Engraver, Laser Engraving Cutting Machine for Wood and Metal, 32-bit Motherboard LaserGRBL, LightBurn, Eye Protection Compressed Spot, 15.4'' x 15.4'' DIY Engraving Area(AL2 LU2-2)

  • 【Advanced Motherboard】Aufero Laser engraver adopts the advanced motherboard (32-bit MCU) for fast and precise engraving.
  • LU2-2 Laser Module (real luminous power:1,000-1,600mw).
  • 【Excellent Mechanical Structure】Aufero Laser enraving machine is designed with low gravitity center of X-axis, providing more stability and ensuring accurate engraving even at high processing speed.
  • 390mm×390mm large engraving range to meet various DIY needs.
  • 【Broad Compatibility】Aufero Laser cutting engraving machine is compatible with mature engraving software-LaserGRBL(free), LightBurn(paid).
  • supports Win XP / Win 7 / Win 8 / Win 10, Mac and Linux system.
  • 【4 Safety Protection】→ 1: Active Position Protection.
  • 2:Exposure Duration Detection and Limitation.
  • full safety protection allows you to hook on your project without any worry.
  • 【Dual Eye Protection】Aufero Laser engraver features a protective cover which effecitvely protects your eyes from dazzling beam.
  • comes with a pair of goggles for more protection.
  • works on food, MDF, paperboard, plywood, black acrylic, leather, power coated metal, stone, ....
Check Stock

xTool D1 Pro Upgraded Laser Engraver, 10W Dual Output Laser Cutter, 60W Laser Engraving Machine,DIY laser cutter and engraver machine, CNC Laser Engraver for Wood and Metal, Dark Acrylic, etc.

  • 【High Speed With Powerful 10w Dual Laser Output】xTool D1 Pro laser engraver combining 2 laser beams into 1, has 60w machine power and 10w output power. It can cut a 6mm basswood board or 3mm black acrylic in ONE PASS, at a speed up to 24000mm/m..
  • 【Super Fine Engraving & Cutting】With all aluminum alloy made structure and steel shaft wheel guide rail design,xTool D1 Pro is also equipped with strong belt tension adjustment device and 0.08*0.08mm super fine spot focus, enable engraving/cutting accuracy precisely controlled within 0.004 inches,repositioning accuracy less than 0.007 inches..
  • 【Upgraded Security】xTool D1 Pro laser cutter has built-in flame Sensor for detect and alarm fire in time, while it is more convenient to find the position of the laser head and prevent equipment from colliding with edges with the help of upgraded X&Y axis limit switches..
  • 【Newly Upgraded xTool Creative Space Software】Tailor-made free software for xTool Series laser engraver, more smooth to begin your DIY with unlimited use of 500+ elements, 30+ fonts, and default parameters for common materials..
Check Stock

LaserPecker 3(Basic) Laser Engraving Machine, Fiber Laser Engraver 1064nm Cold Red Light 0.01mm Compressed Spot, 48000mm/min High Speed Handheld Fiber Laser Marking Machine for Metal Jewelry Plastic

  • Fiber Laser Engraver for Metal and Plastic: LaserPecker 3 laser engraver with 1064nm fiber laser for metal and plastic materials. e.g: stainless steel, gold, silver, aluminum, titanium, copper, coated metal plate.
  • acrylic, plastic, etc. Can be directly engraved without any preprocessing..
  • Much Smaller Compression Spot: LaserPecker 3 laser engraving machine adopts a 0.01mm*0.01mm ultra-fine compression spot, achieving detailed and vivid engraving images. Present pixels with 4K level perfectly..
  • Ultra Fast Engraving: LaserPecker 3 fiber laser marking machine with innovative galvo technology achieves high-speed engraving at 48000mm/min. Comparable Industrial-grade engraving speed brings a subversive experience..
  • Easy To Focus, Quick To Start: LaserPecker 3 laser engraving machine adopts dual infrared light positioning design (When the two red light spots are coincident, the focus is correct), which can accurately locate the marking position without offset and good position.
  • Quickly and accurately control the lifting of electric stand, can be realised easy focus on objects of different heights..
  • Versatile Base, Create With Easy: With the help ot the positioning plate on the base, the position of the engraving objects can be fixed/adjusted, making batch engra....
Check Stock