Categories

Best High Speed Spindle

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

RATTMMOTOR 2.2KW CNC Air Cooled Spindle Motor ER20 80mm Spindle 220V High Speed 24000RPM 3HP 400HZ for CNC Router Engraver Milling Cutting Machine

  • The 2.2KW air-cooled spindle motor's 220V, 8.5A, 400HZ frequency, less than 0.05mm runout off, 0-24000RMP speed..
  • It should be noted that the spindle speed must be kept above 9000 rpm, otherwise the spindle will be damaged..
  • It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine..
  • This spindle is designed with a dustproof and waterproof cover, the body is made of stainless steel, and the rear is equipped with a cooling fan,....
  • It contains 4 bearings, high-precision grinding taper hole, high-precision, low noise..
Check Stock

INTBUYING WM180V Metal Lathe Machine Benchtop Lathe Machine 7''x12'' Mini Precision Lathe Brushless Motor 600W 2500RPM Variable Speed Mini Metal Lathe MT3 Spindle Taper Inch Thread Precision 110V

  • 【Great Performance】WM180V Mini Lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies by Brushless Power 600W/110V,The length of center is 11.8"(300mm),Swing Over Bed is 7"(180mm),Rotary diameter of tool rest is 5.51"(140mm),Diameter of chuck is 3.94"(100mm),Spindle taper is MT3,Precision of the spindle is 0.01mm.❥Our metal lathe include 7 gears(30/48/50/52/60/66/70)..
  • 【High Precision Operation】❥High Precision Reverse three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly.❥Precise dials are provided on the saddle handle, the tail stock handle and the movable center, allowing for more accurate and professional work.❥With the MT2 taper in tailstock spindle, this lathe machine is capable of adjusting set screws for accurate operation..
  • 【Easy to operate】❥The rotation speed can be displayed on the digital screen,which is more convenient for accurate adjustment and operation.❥The adjustable 4-way tool post on the lathe allows you to easily change your cutting tools.❥Forward and reverse switch and with emergency stop switch In case of emergency can stop immediately..
  • 【Adjustable Rotation Speed】The spindle rotation speed is divided into two adjustab....
Check Stock

Huanyang Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz Φ80mm ER11 Collet for Wood Carving

  • The item is Water Cooled 110V-1.5KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 110v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle..
  • stable performance,high precision bearing.
  • Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
Check Stock

Spindle Motor 2.2kw Square Air Cooled Spindle Motor ER20 Collect 24000rpm 220V 6A 400Hz CNC Spindle Motor for CNC Router Engraving Milling Cutting Machine

  • Wiring: terminal U1 of the spindle is connected to U of the inverter, terminal V1 of the spindle is connected to V of the inverter, terminal W1 of the....
  • Before driving, rotation of the shaft by hand.Spindle high speed rotation caused by temperature rise, use of cooling liquid circulating system to....
  • 4 Bearings, runout less than 0.01mm, power factor is about 0.82-0.87.
  • Precision tapered hole: less than 0.005mm. Note: The spindle speed cannot be lower than 9000rpm.
  • Main application: Wood, Aluminum, Stone, metal, glass, PVC industry.
Check Stock

Digital Rotational Viscosity Meter Viscometer Tester Rotary Viscometer, 110V 60Hz with US Plug

  • Display in cP or mPas, % torque, spindle and speed.
  • Excellent accuracy of 1% and repeatability ot 0.2%.
  • Rotary switch to quickly change spindle and speed settings.
  • Auto range features to view full scale range of spindle/speed selections.
Check Stock

SHOP FOX M1036 Micro Milling Machine, Small

  • Item may ship in more than one box and may arrive separately.
  • Motor: 0.2 HP, 2A, 110 Volt, single-phase.
  • Table size: 3-1/2-Inch by 8-Inch.Low speed range:0-3600,High speed range: 0-500.
Check Stock

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock

Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet HUANYANG CNC VFD Motor Factory Direct Sales

  • The item is Water Cooled 220V-2.2KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 220v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 110v voltage at 50hz or....
  • Lubricated with grease, which is resistant to 200 degrees high temperature..
  • Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding..
Check Stock

TECHTONGDA Mini Milling Machine MT3 Mill Drill Machine Benchtop Mill/Drill Milling Drilling Machine Brushless Motor Variable Speed with Digital Readout 110V 1100W

  • ⚒️ The Mini Milling Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on..
  • ⚒️ Machine head tilt, Spindle incline Angle: ±90°(The nose can actually rotate 360 degrees), Spindle taper: MT3, Max. drilling diameter: 0.9"(25mm), Distance from spindle to table: 13.8"(350mm), Spindle stroke: 2"(52mm), Table size: 27.5"*7.1"(700mm*180mm).
  • ⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm.
  • ⚒️ Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM..
  • ⚒️ Widened working table: 27.5"*7.1"(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable..
Check Stock

Grizzly Industrial G0733-18 x 47 Heavy-Duty Wood Lathe

  • Electronic variable-speed spindle control.
  • Headstock can be positioned anywhere along the bed.
  • Heavy-duty cast iron bed and legs ensure stability and minimal vibration.
Check Stock

AMX ap-25 Plateau Tournant Préampli Audio Pour raccordement

  • STABILIZING ROTATIONAL SPEED: This is a great record stabilizer for LP record player, which will efficiently keep the disc from shaking and reducing vibration with stabilizing rotational speed. It is good for eliminating vibration, stabilizing rotational speed, and maintaining horizontal level of LP Turntable..
  • PURE AND EXCELLENT MUSIC ENJOYMENT: This record weight stabilizer realistic sound reproduction and lower noise, perfect for maintaining stability, and improving acoustic quality. provide you a pure and excellent enjoyment in music..
  • COMPATIBLE WITH MOST LP TURNTABLES: The spindle hole of this LP vinyl turntable metal disc stabilizer is suitable for a spindle diameter of up to 7mm, and it works well with most existing LP turntables and has a superior effect..
  • HIGH QUALITY ALUMINUM ALLOY: This aluminum turntable clamp is made of high quality aluminum alloy, with a bright and beautiful surface, and is durable. Match with your record to improve your quality of life..
  • BUILT IN HIGH PRECISION BUBBLE LEVEL: This vinyl record vibration reducer has built in high precision bubble level, show you the rotation speed of the LP disc. It can maximize the high quality sound of the record..
Check Stock

2.2KW 3HP Spindle Motor and VFD Set Air Cooled Er20 CNC Spindle with Matching Variable Frequency Drive Inverter 220V

  • 2.2kw Air -cooled Motor Spindle and Matching Inverter.
  • 2200kw Air -cooling High Speed High Precision Spindle.
  • RS485 communication port,adopting standard international MODBUS main circuit control 1.5KW 2HP VFD.
Check Stock