Categories

Best High Strength Clamping Devices

Forward HY-DT150B-6IN Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil (6")

  • Jaw width:152.4mm(6"), Opening: 125mm(5"), Throat Depth: 66.6mm(2 5/8"), Clamp force: at least 5500lbs.
  • More Durable and Sturdy: Material updated, stationary body and floating body are all made from high strength cast iron and ductile iron.
  • Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise.
  • Great for clamping and fixing workpiece: Higher clamping force.
  • 360 degree swivel base providing unlimited clamping space.
  • Perfect Dual-Purpose Vises: This 6" vise is suitable for both industrial and DIY home use. The front jaw can be rotated by 360 degree, more convenient for clamping works.
Check Stock

BULUSHI 25mm Dia Snap-in Webbed Plastic Cable Bushing Grommet Black 40pcs

  • Scientific Design:Inside of each grommet have rubber boot sealing ring to tight the connector, waterproof design.Wide clamping range with strong durable stretching resistance, cause no damage to cables or devices.
  • Cable glands adjustable: 6-12mm/0.23" - 0.47".
  • High Quality Materials:Made of high-level tensile strength & toughness, which won’t crack after used a long time in harsh environments.
  • Easy to install:You just need to thread the cable through the cable gland then tight up the sealing nut and lock nut, the cable will be tightly fixed but no need to disassemble.
  • Wide Applications:The cable glands are Wildly use to cable fixing, wire splices, machinery control boxes, distribution panels, and electrical appliances etc.
Check Stock

Happybuy Milling Vise 3 Inch,Mill Vise Ductile Iron Precision Lock Down Vise,Heavy Duty Milling Machine Vise,for Milling, Drilling Machine and Precision Parts Finishing

  • 【PREMIUM QUALITY STRUCTURE】- The whole bench clamp is made of high-quality material with high hardness and stiffness. Designed for long-term service time..
  • 【POWERFUL CLAMPING FORCE】- After fine grinding treatment, the surface of the clamp is smooth and flat. Clamping the workpiece without shaking, and the machining accuracy is higher. Jaw Width: 3.15 inch (80 mm).
  • 【HIGH ACCURACY SCREW】- The screw rod is made of high strength material which is not easy to deform, wear resistance, and achieves smooth rotation. Accurate to 0.002" on parallelism and squareness..
  • 【REINFORCED & ADJUSTABLE】- The solid base and swivel handle make the use more stable and convenient. Easy to operate and improving working efficiency. Maximum clamping force of 15 KN.
  • 【WIDE APPLICATION】- It is an essential tool for fitters. Most work of the fitters is completed by using the clamping vise such as sawing, filing, chiseling, and some assembly and removal jobs..
Check Stock

Head Stud Replacement Kit for 7.3L 1993-2002 Ford Power Stroke Diesel CP879

  • DIRECT FIT REPLACeMENT - Fits 7.3L 1993-2002 Ford Power Stroke Diesel Models. Engineered to unleash more performance out of your vehicle. Centerless ground to assure perfect concentricity. Please see vehicle compatibilities above to ensure accurate fitment..
  • ULTRA STRENGTH - XOTIC 7200 material properties allow for far greater tensile strength compared to 8740 chromoly steel head studs. Rated at 220,000 psi tensile strength. Threads rolled after heat treatment for optimum fatigue strength. Ample clamping strength prevents cylinder heads from lifting..
  • EASY INSTALLATION - Broached stud ends install & make cylinder head removal easier. Installation manual is included with drawn diagrams to ease the installation process. Head studs are designed to retain cylinder seal even with today's extreme high pressure turbo systems. These studs far exceed clamping forces provided by standard head bolts..
  • KIT INCLUDES - 36x Heads Studs, 36x Nuts, 36x Hardened Parallel Washer, 1x Fastener Assembly Lubricant & Instructions Manual. Black oxide finish protects from wear and tear. Hardened parallel washers allow for uniform load distribution and accurate torque readings..
  • WORRY-FREE PURCHASE - Xotic Performance is dedicated to offering LIFETIME WARRANTY and full money ....
Check Stock

RAM Mounts Quick-Grip Universal Phone Holder with Ball RAM-HOL-PD3-238AU with B Size 1 Ball

  • Spring-loaded holder features adjustable side supports that provide a secure fit for a variety of large phones and other devices.
  • Included B size 1" RAM rubber balls allows for connection to any B size RAM double socket arm.
  • ball and socket technology allows for near-infinite....
  • Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments.
  • Cradle Clamping Dimensions: Height Range: 4.75" - 5.75", Width Range: 2.19" - 3.25", Max Depth: 0.72".
Check Stock

Hand Wheel, 250x22mm Lathe Handwheel for Machine Tool

  • DURABLE MATERIALS: Made of 40Cr and carbon steel materials, with carburizing and quenching process, high hardness and strength..
  • INTEGRATED FORMING: The inside and outside of the tool holder are integrally formed, fine control processing, with stable performance..
  • HIGH ACCURACY: Inner hole grinding treatment, has high concentricity, suitable for high accuracy machine tool processing..
  • CLAMPING RANGE: The clamping range of the extension rod is 1‑7mm, standard in size, and it is suitable for ER11 collet..
  • WITH WRENCH: Equipped with a wrench, stable in processing, and can effective vibration suppression..
Check Stock

Router Table Lift System, Aluminum Alloy Stainless Steel Simple Operation Router Lift Base Sturdy 4 Jaw Clamping for Small Trimming Machines

  • DIY ROUTER LIFT TABLE: This base is suitable for making your own router worktable for high precise woodworking, easy to install and operate..
  • EXCELLENT MATERIALS: Composed of aluminum alloy body and stainless steel support rod, with high strength, rust and corrosion resistance..
  • FIRM CLAMPING: The router lift base adopts 4 jaw clamping way, the clamping is firm and stable, not easy to fall off..
  • EASY ADJUSTMENT: Come with crank handle, you can easily and accurately adjust the height of the router bit from above the desktop..
  • WIDE LIFTING RANGE: The base supports lifting height up to 51mm, supports machine diameter is 64mm to 66mm, ideal for small trimming machines..
Check Stock

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

Wurlitzer K7 Actuator Aftermarket Jukebox Part

  • RUST PROOF ALUMINUM ALLOY: The guide rail bracket is made of good quality aluminum alloy, which is rust proof and wear resistant. The is sandblasted and oxidized. Light in weight, high in strength, heavy in load and durable.
  • LOW FRICTION: Rail clamping rod possess low frictional resistance, movement, high rotation accuracy and low vibration.
  • ACCURATE ROTATE: Linear motion rail clamping guide support can get high accuracy rotation in motion, easy to maintain and replace.
  • MORE SECURE AND STABLE: Linear bearing bracket is an exquisite base, provide more secure fixation and quality assurance.
  • WIDE APPLICATIONS: Linear optical axes brackets are suitable for various electronic equipment guide rods, drive shafts and struts, and have a wide range of applications.
Check Stock