Categories

Best High Table Banding Machine

Edge Supply White Melamine 3/4 inch X 25 ft roll of White Edge Banding – Pre-glued Flexible Edging – Easy Application Iron-On Edging for Cabinet Repairs, Furniture Restoration

  • WHITE MELAMINE EDGE BANDING – this roll of white edge banding is of superior quality and pre-glued with strong adhesive. Perfect for repairing or finishing off cabinets, DIY projects, shelving or repairing furniture, this edging will give a smooth, neat finish to your projects.
  • SUPERIOR QUALITY MELAMINE EDGE BANDING – made to last, this white roll of cabinet edge banding is durable and supplies a high-quality finish. Pre-glued, our edge banding is ready for your application and easy to use without snagging or splitting.
  • PRE-GLUED FLEXIBLE EDGE BANDING – pre-glued with top-quality, hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the banding strip for a strong, permanent bond.
  • EASY TO APPLY – this white edge banding is very easy to apply by simply placing it onto your item, then applying firm, hot heat with a household iron. Supplied tightly rolled up, our melamine edging is easy to hold for accuracy. An edge banding machine is of course suitable to use for application if you have one in your toolkit.
  • VERSATILE FOR A RANGE OF SURFACES – trimming edge banding is used to enhance and supply a complete look to your shelving and cabinetry. You can use this....
Check Stock

DNYSYSJ Automatic Rebar Tying Machine, 8-34mm Hand Held Rebar Bender Machine Tool Kit, for Civil Building, Foor Pipe, Heating Floor Mesh, Steel Bar w/Pliers+ Charger (Orange)

  • Applicable Scope Of Steel Strapping: 8mm - 34mm.
  • Knot The Required Time: 0.8 seconds at a time.
  • Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.).
  • ★Operating Skills -- 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly..
  • 1X Tying Wire in the machine (Tying Wire Standard: About 0.8 mm x 110 m/roll). (U.S. inventory, fast shipping!).
Check Stock

IDL Packaging - MiniCW34 3/4\ x 250' Mini Woven Cord Strapping Roll, 2400 lbs - Break Strength, 6 x 3 Core, White (Pack of 1)

  • 【3500N TIGHTENING FORCE】This A19 handheld pneumatic banding tools offer a large tension force3500N.
  • 【Portable & Light-weight】This banding machine is easy to carry with small size and lightweight.
  • 【HOT MELTING STRAPPING】The welding tools welds the straps together rather than using binding clips.
  • 【Automatic 】 Automatic banding machine will tighten. weld ,strap, and cut for one time.
  • 【Efficient 】Handheld strapping tool fusion time is just 2S Save time & Labor & your packaging cost.
  • 【Wide Application】Banding strapping kit suitable for carton,steel,logistics,agriculture,industries..
  • 【High-quality】Automatic strapping tool is made of excellent alloy structure It is durable and solid..
  • 【PP or PET straps】Plastic Strapping kit used for 1/2-5/8 Inch Wide PP/PET band thickness: 0.5-1.5mm..
  • 【Friction and hot welding】This strapping tool does NOT require additional fasteners for fixing.
  • This pneumatic tool works quickly and allows for making the strapping nice and tighter.
Check Stock

Edge Supply Maple Wood Veneer Sheet Flat Cut, 24\ x 96\

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” X 50' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to w....
Check Stock

Mixed Variety Domestic Veneer Pack 5-6 sq ft/9 Sheets Or More

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood,....
Check Stock

40-6\ x 12\ Labeled Wood Veneer Pieces (20 Square Feet) Exotic and Domestic Marquetry Arts Crafts Pack

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, red oak wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this red oak 2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging ....
Check Stock

YUCHENGTECH Woodworking Edge Bander Banding Machine Portable Edge Bander Curve Straight Edge Banding Machine With Speed Control 5-10m/min (110V, Adjustable speed)

  • 1.Advantages: More suitable for sealing edges of different shapes, finer and shorter edges. It can seal straight edge, curve, outer arc, inner arc and circumference (arc radius 20mm or more), and the length of the frame is not limited..
  • 1.【Characteristic】：Portable edge banding machine, small size, light weight, can carry edge banding, can also be in desktop..
  • 2.Characteristic: Portable edge banding machine, small size, light weight, can carry edge banding, can also be in desktop. Free from time and space constraints, it can be operated anytime, anywhere..
  • 3.Glue and temperature: Upgrade the heating system for stronger edge sealing. High temperature glue: the temperature should be adjusted to 220-230¡ãC.
  • medium and low temperature glue£ºthe temperature should be adjusted to 150-170℃..
  • 4.Important parameters: The speed can be adjusted. Edge sealing speed: 5 ~ 10 m / min.
  • 5.Applications: Suitable for all kinds of plates and edge strips, such as: ABS, PVC, particle board, melamine board, fine wood board, MDF, integrated board, acrylic board, etc..
Check Stock

Edge Supply Walnut Preglued 1\ X 25' Roll Wood Veneer Edgebanding - Iron on with Hot Melt Adhesive. Sanded to Perfection. Easy Application. Made in USA.

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple 1/2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is....
Check Stock

Edge Supply Walnut 7/8' X 250' Roll Preglued. Walnut Edge Banding, Iron on with Hot Melt Adhesive. Flexible Wood Veneer Walnut Edging Sanded to Perfection. Easy Application, Made in USA.

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, walnut wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this walnut 7/8” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging....
Check Stock

Edge Supply Birch 13/16' X 250' Roll of Plywood Edge Banding, Preglued Real Wood Veneer Edging, Flexible Veneer Edging, Easy Application Iron on Edge Banding for Restoration, Made in USA

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 7/8” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging i....
Check Stock

Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)

  • Easy To Use - Works perfectly with no practice or experience, Pneumatic action allows the edge banding cutter to adjust to different thicknesses very easily. Makes edge banding a breeze, is very comfortable to use, will not cause palm fatigue..
  • Save Time - Using our edge banding tools can greatly reduce the time and effort to complete the work, no more utility knives or razor blades. This plywood edge trimmer tool makes it so easy!.
  • Sharp, Leave No Trace - The sharp tungsten carbide blades to make the trimmer cut smoothly and cleanly and leave a nice edge. Will not cause the problem of excessive cutting. Clean, tight incisions, no confusion or fuss..
  • Easy Conversion - Easy to disassemble and assemble! When you cannot slide the tool with the two jaws due to the special gap problem, you can take the veneer edge trimmer apart and use it on one edge at a time..
  • Cuts in Both Directions - The edge banding machine has four sharp cutting edges, which can trim forwards and backward. This is very suitable for trimming oak edge banding and is suitable for any project that involves installing ....
Check Stock

Edge Supply Cherry Wood Veneer Sheet Flat Cut, 24” x 96”, 10 mil Paper Back, “A” Grade Veneer Face – Easy Apply with Contact Adhesive Cherry Veneer Sheet – Veneer Sheets for Restoration of Furniture

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3” X 25' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to woo....
Check Stock

Edge Supply Birch 3/4 inch X 50 ft Roll of Plywood Edge Banding Pre-glued Real Wood Veneer Edging Flexible Veneer Edging Easy Application Iron-on Edge Banding for Furniture Restoration

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING this birch 50' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood, particle b....
Check Stock