Categories

Best High Temperature Fittings

Spears 817 Series PVC Pipe Fitting, 45 Degree Elbow, Schedule 80, 2' Socket

  • 45-degree elbow for connecting two pipes or fittings at an angle.
  • Socket ends for connecting to male pipes or fittings.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

TL TOOLEGIN DOT Brass Push to Connect Fittings 1/4" Air Brake Union Air Line Fittings Push in Fittings Brass Union Air Brake Repair Kit Contains Tube Push-in Tee Union Coupling Male NPT 90° Elbow

  • Unique Air Line Tubing Kit: The air brake fittings contains 2pcs 1/4” Unions, 2pcs 1/4’’ Tees, 2pcs 1/4” DOT Push-In × 1/4” MNPT, 2pcs 1/4” DOT Push-In × 1/8” MNPT 90° Elbow, 2pcs 1/4” DOT Push-In × 1/4” MNPT 90° Elbow..
  • High-quality Material: Our push in fittings are made of high quality brass CA360 CA377 , with corrosion resistance, high temperature ductility and low permeability..
  • Technical Parameter: The Working Pressure is from Vacuum to 250 psi, the Working Temperature is from -40° F to +200° F..
  • Easy to install: All fittings can be sealed by pushing the tube firmly into the fittings, and they are also simple to be removed from the tube..
  • Wildly Usage: The air brake union assortment kit can be used with air systems, copper tubing in air brake systems, which is perfect for garages, workshops and so on..
Check Stock

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

  • straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

Utah Pneumatic Push To Connect Air Fittings Tube 3/8\ Od Straightair Air Line Union Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack(3/8 Straight)

  • Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • 【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no to....
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

Corsair Hydro X Series XT Hardline 12mm Multicard Kit

  • The CORSAIR Hydro X Series XT Hardline Multicard Kit is pre-cut for SLI and CrossFire X, letting you easily add multiple cards to your custom cooling system in two, three or four slot graphics card spacing..
  • Crystal-clear chamfered tubing easily and neatly links your GPU water blocks together with just one set of Hydro X Series XT Hardline Fittings..
  • Resilient PMMA construction won’t warp or deform under high pressure or temperatures..
  • Neatly link your GPU water blocks together with crystal-clear, ultra-resilient chamfered tubing using just one set of Hydro X Series XT Hardline Fittings..
  • Max Operating Temperature: 60°C coolant temperature.
Check Stock

VIVOSUN 1/4HP Active Aquarium Chiller Ultrahigh Refrigeration Efficiency for Both Freshwater and Seawater

  • SMART TEMPERATURE CONTROL: Precise, automated temperature control with easy-to-read LED screen, single-chip microcomputer temperature control system and built-in RAM memory CMOS chip.
  • POWERFUL AND RELIABLE MOTOR: The 1/4 HP motor easily maintains the perfect temperature in your hydroponic reservoir or aquarium.
  • specs: 115V, 50/60 Hz, uses R-134A (Freon-free!).
  • OPTIMIZED DESIGN FOR FRESH OR SALT WATER: VIVOSUN’ s pure titanium heat-exchanger delivers quick refrigeration.
  • and its top-grade materials don’t corrode when cooling seawater.
  • COMES WITH FITTINGS(in &out) : This compact features convenient dimensions: 15″L x 10″W x 17″H.
  • and comes with the following tube fittings 3 different sized hoses: 1/2″(2pcs), 3/5″(2pcs) & 3/4″(2pcs).
  • ULTRA-HIGH EFFICIENCY REFRIGERATION &ENERGY SAVING: super-silent compressor,cools up to 660 gallons (2,500 liters) per hour quietly and with optimal energy efficiency.
  • recommended water volume 26-158 gal/100-600 liters.
Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • ...table water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemical environment..
Check Stock

Raincovo Pressure Washer Quick Connect Fittings, M22 14mm to 3/8 Inch Quick Connect Pressure Washer Hose Adapter, 4 Pieces

  • Includes 4 pieces adapters. Pressure washer quick connect fittings make it easier and faster to setup and takedown the hose..
  • Pressure washer adapters are used for power washer gun, hose and pump connections..
  • M22 14mm thread fittings are well made. Advanced technology to ensure the high precision of thread and no leaks..
  • 3/8 Inch quick connect fittings are great for snap. Very smooth to attach and release..
  • Made of brass, high build quality ensures long life. Max pressure is 4500 PSI. Max working temperature is 300 °F..
Check Stock

GeilSpace 4-Way, Malleable Iron Pipe Fittings - Vintage DIY Industrial Shelving, Industrial Decor, Furniture DIY (3/4\

  • MATERIAL & PRODUCTS - GeilSpace Pipes and Fittings are designed with a standard industrial finish.
  • materials and threads constructed from sturdy cast iron.
  • Unlike most other products on Amazon with grey looking and oily surface, our products’ surface is black and clean after high temperature paint, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES – Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs..
  • GUARANTEE&DELIVERY: We promise to provide you with good quality products and services to your satisfaction. If you are not satisfied with our products, 100% guaranteed return of goods. The goods will be sent in 1-3 business days for Amazon Prime Members, and 1-5 business days for normal Amazon Members..
Check Stock

Utah Pneumatic Plastic Push To Connect Fittings Tube 10 Pack 1/4\ Od Straight Push Fit Fittings Tube Fittings Push Lock Hose Union (1/4\ Straight)

  • utah pneumatic Push to Connect fittings: air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fittings.
  • Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
  • You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape.
  • All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned.
  • At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Brass push connectors Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings.
Check Stock

FORMUFIT F114TEE-WH-4 Tee PVC Fitting, Furniture Grade, 1-1/4\ Size, White (Pack of 4)

  • 【0% Metaloxide】: Poly PEX A expansion tee fittings made by premium PPSU materials without metal, provide lead-free potable water, healthy for human and environment..
  • 【PPSU Materials】: Light and durable, chemical stability. Well performance in corrosion resistant, heat and water resistance, RO (reverse osmosis), chlorinated and other types of water. Meet cUPC, NSF, F1960 standard..
  • 【160 PSI, 200°F】: Expansion tee fittings tightly connect with pex-a tube under high temperature/pressure. Applied to Building services pipework systems, Plumbing and heating (or cooling) systems, Potable water service line etc..
  • 【Stopping Shoulders】: To indicate PEX A pipe fully insert in expansion fittings, leak-free. Cold connection, use with expander and expansion rings, no require for glue or sealing tape..
  • 【Package】: 1/2" Poly Expansion PEX A Tee Fittings 15PCS. (Note：Expansion tool and rings are not included)..
Check Stock