Categories

Best High Torque Motors

BEISGUANGS Electric Bike Accessories Universal Torque Arm Conversion Kit for ebike Front or Rear Hub Motor Wheel E Bike kit Easy Install Reinforcement

  • 【Material】Torque arm is made of high-quality metal, with good design and strong resistance to deformation. The surface is galvanized to prevent corrosion and maintain gloss..
  • 【Size】Torque arm length 86mm, shaft hole 14mmX10mm, C clip 14mmX10mm, arm thickness 3mm, hub bracket thickness 4mm, C clip thickness 3mm, can be adjusted according to different configurations..
  • 【Function】This torque arm will help prevent the motor from loosening from the bicycle's front fork (front) or frame (rear fork), and prevent the slotted shaft from bending or breaking your dropouts. Necessary for high-power motors..
  • 【Installation】This torque arm is suitable for electric bicycle motors and electric bicycle conversion kits. Easy to install, the product is suitable for normal motor shafts, except for special shafts (the size of the motor shaft does not exceed 14mm)..
  • 【List】Contains 1 long reaction arm + 1 short reaction arm + 1 hex screw + 1 collar + 1 nut + 2 washers. (as the picture shows). It can provide maximum protection for your electric bicycle, motor and hub motor wheel..
Check Stock

10:1 Planetary Gearbox 1/2\(12.7mm) Input Shaft for Nema 34 Stepper Motor 3000RPM Gearhead Gear Reducer CNC Benchtop Lathe Machine (10:1)

  • 1/2" (12.7mm) Input Shaft , connect directly with motors which has 12.7mm shaft.
  • Rated 30Nm high torque planetary gearbox ,10:1 speed reduction.
  • Nema34 flang, the gearbox must be screwed on the motor with the offer 4pcs screw to keep the concentricity. Very easy to install on motors, gearbox output shaft keyway dimension 5*5*25mm.
  • Rated speed is 3000RPM, precision less than 25 Arcmin.
  • This nema34 planetary gearbox mainly matches the stepper motor to reduce speed and increase torque. Widely used in CNC field on mill,lathe,bench,packaging machine etc..
Check Stock

Golf Cart Motors - Club Car Motors (Series) - 170-002-0002-19 MPH - 10% More Torque - replaces 1012191-48 or 36 volt Golf Cart Motors

  • 99% OF ORDERS SHIP SAME DAY!!!!! - Club Car Golf Cart Motor - can be used on 36 or 48 volt Golf Cart Motors - Can ONLY be used on Series golf cars : Stock 10 Tooth spline - 19 mph & 10% More Torque versus a stock Golf Cart Motor. (replaces 1012191).
  • This motor is an economical way to get some more Torque & Speed. Perfect for moderately hilly environments and mainly on-road. (Club Car Parts Electric).
  • WARNING - No Warranties or Automatic Returns are given on this product and no liability is assumed until D&D Motor Systems has been contacted with all details of your golf cart setup..
  • We are the actual manufacturer, D&D Motor Systems, Inc. - Need Tech support just call us! (Golf Cart Motors).
  • Our Blue motors are the Last Golf Car Motors being MADE IN THE USA (If it's not BLUE, it's not true RED WHITE & BLUE) Golf Cart Parts Club Car.
Check Stock

Furnace Draft Inducer/Exhaust Venter Motor Fits Jakel 1172823

  • Multi-speed, constant torque, brushless DC motor.
  • NEMA 48-frame (5. 6 inch diameter) belly band mount with 5-inch long 1/2 inch diameter shaft.
  • Four discrete speeds using 24VAC, plus automatic continuous fan speed.
  • Designed to replace direct-drive blower motors in residential and light commercial indoor furnaces, air handlers and package systems that were designed with a 6-pole 1075rpm rated PSC motor.
  • Replaces / Supersedes: American Standard & Trane MOT13004 , MOT-13004 , MOT12888 , MOT-12888 , MOT12292 , MOT12319 , MOT12542 , Carrier / ICP HD44AE137 , HD44AE137A , HD44AE138 , 1172987 , 1173682 , 5SME39HKL017 , 5SME39HXL285 , 5SME39HXL298 , S81-948 and other 1/2 HP X13 Constant Torque Motors from ALL Major Manufacturers as well as the Azure Digi-Motor # 10800..
  • DOES NOT REPLACE EON , 3. 0 , 2. 3 and 2. 5 ECM Motors.
  • 1/2 Horsepower , 208-230 VOLT , Universal X13 Replacement Motor.
Check Stock

Fielect Shaft Coupling 12mm to 15mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor

  • 【Dimension】 - Shaft usage:12mm to 15mm/0.47" to 0.59".
  • 【Material】 -The coupling is made of aluminum alloy, the surface is oxidized, and the type isthread holding tight.
  • 【Features】- Connector is wear-resistant, high hardness, good responsiveness, super elastic torque can absorb vibration, suitable for large torque transmission.
  • 【Function】 -The Flexible Coupler Joint transmits torque while suppressing system vibration and adapting to misalignment to protect other components from damage.
  • 【Application】 -The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
Check Stock

Cordless Impact Wrench 1/2 inch, Aiment 550 Ft-lbs Max Torque(700N.m), 21V 3000RPM Brushless Power Impact Gun, 4.0Ah Li-ion Battery with Fast Charger, 6Pcs Sockets, Electric Impact Driver for Car Home

  • 【High Torque & Brushless Motor】 550ft·lb (700NM) powerful torque meets industrial-level work requirements. High-quality brushless motors provide a guarantee for high performance. The life of brushless motors is 1.5 times longer than carbon brush motor! It only takes a few seconds to loosen or tighten the car tire screws with it..
  • 【3 Gear Torque Adjustment】 You can set the most suitable torque according to different needs. Three gears, accuracy +/-5% (450Nm/ 650Nm/ 700Nm). 1/2 inch drive, it can work with different sizes of sockets. The Impact wrench set has 6 socket accessories: 18/19/21/22/23/24mm..
  • 【4.0Ah Fast-Charging Battery】4.0Ah battery=2*2.0Ah battery. Provide you with double the battery life. It only takes 2.5 hours to fully charge. The battery has a convenient power display LED indicator. You can always know when you need to charge the device..
  • 【Elaborate Design & Easy Maintenance】The belt hook on the side of the brushless wrench and the toolbox are easy to carry when working outdoors. The soft all-rubber handle can reduce fatigue during work. The brushless wrench does not generate heat or ....
Check Stock

Fielect Shaft Coupling 17mm to 17mm Bore L66x40D Flexible Coupler Joint for Servo Stepped Motor

  • 【Dimension】 - Shaft usage:17mm to 17mm/0.67" to 0.67".
  • 【Material】 -The coupling is made of aluminum alloy, the surface is oxidized, and the type isthread holding tight.
  • 【Features】- Connector is wear-resistant, high hardness, good responsiveness, super elastic torque can absorb vibration, suitable for large torque transmission.
  • 【Function】 -The Flexible Coupler Joint transmits torque while suppressing system vibration and adapting to misalignment to protect other components from damage.
  • 【Application】 -The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
Check Stock

Axis-Plate Dual Motor Vibration Plate Exercise Machine with Resistance Bands - 3D Whole Body Fitness Platform - Silver

  • Dual motors: Two motors allow independent or combined use of oscillating motion (seesaw / side to side) and spiral motions (up and down). The motors....
  • Best in class power: Both motors in this vibration plate machine are upgraded high-torque models for an extremely effective workout for all fitness....
  • Fast complete workout: Whether the goal is to stimulate weakened muscles, improve circulation, or get into overall better health and tone, this....
  • Resistance bands & remote control: Enhance your workout with the set of included resistance bands. These attach securely to the base, helping to....
  • Built for life: Featuring a sturdy steel frame with dent-resistant composite cover this machine is designed for durability and stability. It supports....
Check Stock

Hobbysky 6374 190KV Brushless Outrunner Motor Belt Drive Motor with Closed Cover and Hall Sensor for DIY Electric Skateboard Electric Bike Mini Scooter Surfboard (10mm Shaft)

  • ★ Fast Shipping by DHL if Purchase Two or More Motors Per Order.
  • Fast Free Shipping by DHL if Purchase One Motor and One ESC Per Order.
  • ★ ADVANCED DESIGN :The Closed Cover Enable Motors Dustproof and Waterproof.
  • ★ POWERFUL MOTIVATION: The Max Output Watt is 3600W and Not Easy to Get Hot.
  • ★ BETTER EFFICIENCY:This Motor Comes with Low KV(190RPM/V), High Torque(Max Torque is 3.57N.m),So You Can Get More Mechanical Energy Per Unit of Power.
  • ★ EASY TO INSTALL: Two Rows of Concentric Mounting Holes Allow You to Quickly Install.
Check Stock

Fielect Shaft Coupling 6mm to 10mm Bore L25xD20 Flexible Coupler Motor Connector Joint Maximum Speed 8000rpm Aluminum Alloy Silver

  • 【Dimension】 - Shaft usage:6mm to 10mm/0.24" to 0.39".
  • 【Material】 -The coupling is made of aluminum alloy, the surface is oxidized, and the type isthreaded top wire.
  • 【Features】- Connector is wear-resistant, high hardness, good responsiveness, super elastic torque can absorb vibration, suitable for large torque transmission.
  • 【Function】 -The Flexible Coupler Joint transmits torque while suppressing system vibration and adapting to misalignment to protect other components from damage.
  • 【Application】 -The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
Check Stock

M6C12 EEE 150KV MAD COMPONENTS Antimatter brushless Motor for Multirotor Quadcopter Hexrcopter Drone RC DIY Hobby rig

  • ENTHUSIASTS EXTREME EDITION for extreme weight reduction while maintaining the highest possible performance. Our brand ANTIMATTER motors are defined as not “ordinary” in the multi-rotor motors field. We are proud to release ANTIMATTER series motors at the end of 2019. We spent one year to design and prove which motors are the most efficient with 21-24in props. This is the magic! MAD Components in Poland brings to the table. It is for unmanned Vehicle Aerial system (UAS, UAV, RPAS or drone)..
  • MOTOR SETUP COMPATIBILITY Mounting holes standardization 4 x M4 Ø32 mm 4 x M3 Ø25 mm.
  • EXTREMELY REDUCED WEIGHT Airy case design Passive heat dissapation Lower power consumption & Maximized performance.
  • HIGH VOLTAGE Designed for 6-12S voltage Increased torque.
  • PROPELLER INSTALLATION COMPATIBILITY multiple propeller mounting options 4 x M3 Ø12, 4 x m3 Ø18 mm,4xm3 Ø22 mm.
Check Stock

Protech 51-102500-01 1/2 hp 120/1/60 Blower Motor

  • HIGH TORQUE: Adopting high quality motor steel material, DROK 3d printer stepper motor kit is provided with high torque (0.46 Nm/ 65 oz-in), low self-inductance reactance, responsive and can avoid system error..
  • LOW NOISE: The internal rotor of our anet anet a8 stepper motor kit is made with introduced German craftsmanship and there is rotor rubber covering the rotor, effectively reduce the noise..
  • DURABLE & TOUGH: Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction..
  • WIDE APPLICATION: This small motors can be used in various area, such as stage lighting.
  • WHAT YOU GET: The package includes 1* 42 Stepper Motor..
Check Stock

Five Oceans FO4205 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 130lbs 60kg, Black Poly Mounting Board 25HP

  • Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches black poly mounting board for the new wider style motor locking clamps Transom Plate Measures: 4-3/8 inches x 4-7/8 inches.
  • They are designed for 4-stroke motors. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
  • Suitable for motors up to 25HP with a maximum weight of 130 pounds. Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
  • Built especially for new 4 strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary motors with ease.
Check Stock