Categories

Best High Viscosity Gear Oil

Red Line (50304) MT-90 75W-90 GL-4 Manual Transmission and Transaxle Lubricant - 1 Quart

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Red Line MTL Manual Transmission Oil- Pack of 4 Quarts 4 Pack

  • LONGER SYNCHRO LIFE - High-performance gear protection, satisfies the gear oil viscosity requirements of 75W, 80W and motor oil viscosities of SAE 30,....
  • OFFERS QUICKER SHIFTS - MLT Gear Oil with balanced friction control for most manual transmission synchronizers. Other synthetic gear oils are often....
  • SAFE FOR BRASS SYNCHROS - As it lacks the reactive sulfurs found in most GL-5 oils that cause damage. Recommended for GL-1, GL-3 & GL-4 applications.
  • COMPATIBLE WITH - BMW, Honda/Acura, Ford Focus, late-model Mini Cooper, Land Rover/Range Rover LT77S, Mitsubishi, Dodge & Jeep NV1500, NV3500, NV3550....
  • WHY RED LINE - Established in 1979, Red Line Products perform & protect better than any on the market. No compromises.
Check Stock

Air Wick Botanica Plug in Scented Oil Starter Kit with Air Wick Botanica Air Freshener Room Spray

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Red Line 50204 SAE 75W80 API GL-4 Manual Transmission and Transaxle Lubricant - 1 Quart Pack of 12

  • LONGER SYNCHRO LIFE - High-performance gear protection, satisfies the gear oil viscosity requirements of 75W, 80W and motor oil viscosities of SAE 30,....
  • OFFERS QUICKER SHIFTS - MLT Gear Oil with balanced friction control for most manual transmission synchronizers. Other synthetic gear oils are often....
  • SAFE FOR BRASS SYNCHROS - As it lacks the reactive sulfurs found in most GL-5 oils that cause damage. Recommended for GL-1, GL-3 & GL-4 applications.
  • POPULAR MOTOR OIL FOR - BMW, Honda/Acura, Ford Focus, late-model Mini Cooper, Land Rover/Range Rover LT77S, Mitsubishi, Dodge & Jeep NV1500, NV3500,....
  • WHY RED LINE - Established in 1979, Red Line Products perform & protect better than any on the market. No compromises.
Check Stock

Red Line 50204 SAE 75W80 API GL-4 Manual Transmission and Transaxle Lubricant - Car Gear Oil - 1 Quart Bottle

  • LONGER SYNCHRO LIFE - High-performance gear protection, satisfies the gear oil viscosity requirements of 75W, 80W and motor oil viscosities of SAE 30,....
  • OFFERS QUICKER SHIFTS - MLT Gear Oil with balanced friction control for most manual transmission synchronizers. Other synthetic gear oils are often....
  • SAFE FOR BRASS SYNCHROS - As it lacks the reactive sulfurs found in most GL-5 oils that cause damage. Recommended for GL-1, GL-3 & GL-4 applications.
  • POPULAR MOTOR OIL FOR - BMW, Honda/Acura, Ford Focus, late-model Mini Cooper, Land Rover/Range Rover LT77S, Mitsubishi, Dodge & Jeep NV1500, NV3500,....
  • WHY RED LINE - Established in 1979, Red Line Products perform & protect better than any on the market. No compromises.
Check Stock

MERCURY Genuine Premium Gear Lube Qt - 858058K01

  • Lower unit gear oil formulated to protect against corrosion and excessive wear.
  • Designed for outboard motor lower unit and sterndrive applications above 75 HP.
  • Extreme pressure synthetic additives protect gears from metal to metal contact.
  • Extends gear life in extreme conditions including high-speed and high-horspower applications.
Check Stock

GPI - L5132 High Viscosity Oil Pump, 32 QPM, 230AC/115V Oil Transfer Pump for Viscous Fluids That Features a 0.75” Ball Valve Nozzle, 8 Foot Hose, 3 Foot Power Cord with Three-Prong Plug (142100-02)

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum housing and gerotor gear design, our oil extractor pump ensures long life and minimal maintenance. With the rugged 230/115-volt AC motor, our oil pump delivers a flow rate of 8 GPM or 32 QPM (30L/min)..
  • HEAVY-DUTY OIL PUMP: The L5132 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. Our high viscosity pump is highly productive when used to pump drums, bulk tanks, waste oil reserves, and other oil containers. Modeled to fit easily to a barrel or drum, this oil extractor quickly transfers all incombustible liquids!.
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of fluids without the risk of overheating. The weight centering inlet base of the pump reduces the tank stress and the pressure relief valve offers the easy strainer access..
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and installation time. The pump includes an 8 foot long....
Check Stock

Mercury Marine 92-858064K01 High Performance Gear Lube CASE OF 6

  • Lower unit gear oil formulated to protect against corrosion and excessive wear.
  • Designed for outboard motor lower unit and sterndrive applications above 75 HP.
  • Extreme pressure synthetic additives protect gears from metal to metal contact.
  • Extends gear life in extreme conditions including high-speed and high-horspower applications.
Check Stock

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock

Yukon Gear Gear Lube (OK 3-QRT-CONV) SAE 80w-90 1 Qt. Gear Oil, Pack of 3

  • Lower unit gear oil formulated to protect against corrosion and excessive wear.
  • Designed for outboard motor lower unit and sterndrive applications above 75 HP.
  • Extreme pressure synthetic additives protect gears from metal to metal contact.
  • Extends gear life in extreme conditions including high-speed and high-horspower applications.
Check Stock

Yamaha ACC-SHAFT-LU-00 Friction Modified Plus Shaft D; New # ACC-SHAFT-PL-32 Made by Yamaha

  • Lower unit gear oil formulated to protect against corrosion and excessive wear.
  • Designed for outboard motor lower unit and sterndrive applications above 75 HP.
  • Extreme pressure synthetic additives protect gears from metal to metal contact.
  • Extends gear life in extreme conditions including high-speed and high-horspower applications.
Check Stock

Red Line 50504 MT-85 75W85 GL-4 1 Quart 1 Pack

  • Satisfies Gear Oil Viscosity Requirements Of 75W, 80W, 85W, Sae 30 5W30 Motor Oil.
Check Stock