Categories

Best High Viscosity Index

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

Duragard Arctic Blue Hydraulic Fluid - 5 Gallon Pail

  • FULL SYNTHETIC - No compromise formulation, full synthetic with extremely high-performance metrics. EXTREMELY ECONOMICAL - Lowest cost per hour of operation. Period. MULTI-VISC FORMULATION for wide viscosity range applications..
  • TRUE ALL-SEASON - Extreme temperature range for arctic cold (-54 F) to hot desert summers. Trouble-free, long duration, flawless hydraulic response, and power transfer..
  • 7,000 -10,000 Hour RATING - Minimum 7,000 hour rating and up to 10,000 operational hours in severe service. ZERO FOAMING - Virtually zero foaming in high-stress environments and extremely rapid air release & air separation. Prevents hydraulic cavitation..
  • EXTREME THERMAL STABILITY - Highest viscosity index (194) of any commercially available hydraulic oil. Outstanding temperature tolerances and shear stability under high loads. Prevents overheating, blown hoses, over-pressure, and facilitates excellent heat transfer to keep hydraulic systems cool..
  • CONTAINS 300% ANTI WEAR BOOST - Exceptionally high ZINC levels and corrosion inhibitors to protect expensive pistons and all types of hydraulic pumps..
Check Stock

OEMTOOLS 24399 Vacuum Pump Oil, 8 oz, Hydrotreated, 8oz Vacuum Oil Change Tool Accessory, Widely Compatible for Fluid Pump, Automotive, Electrical, and Mechanical Systems

  • Premium: Extremely high quality, hydrotreated vacuum pump oil.
  • Engineered to maintain viscosity even in extreme temperatures.
  • Essential: Don't damage your equipment with substitute oils.
  • Your vacuum extractor depends on regular service and the quality and purity of your vacuum pump oil.
  • Clean: Used oil contains contaminants like moisture, acids, vapors, and dirt.
  • Vacuum pump oil should be changed after each use to improve performance and the life of the pump.
  • Universal: This mechanical lubricant is compatible with pumps made by most manufacturers.
  • Specifications: 225 Viscosity SUS at 100 degrees Fahrenheit.
Check Stock

Quicksilver 20W-50 Full Synthetic Motorcycle Oil – 1 Gallon

  • NO COMPROMISE FORMULATION – Ours is a state-of-the-art formulation, built for performance. Synthetic ester base oils, built-in friction modifiers, and outstanding viscosity stability under high thermal stress and high RPM..
  • HIGHLY OXIDATION STABLE – Protects the engine from oil thickening, high-temperature sludge, and varnish deposits. SHEAR STABLE HIGH VI INDEX – Improver-protects against viscosity breakdown in severe service and racing conditions..
  • VERY HIGH WEAR PROTECTION – Anti-wear agents and built-in friction modifiers effectively protect cam lobes and other highly loaded parts from wear, including chains and clutches. Excellent performance and high wear protection in high temp engines such as the V-TWIN.
  • Exceed FZG Load Stage 12 – ULTRA FAST GEAR CHANGES – Exceptional gear changes and clutch engagement, facilitates rapid gear changes in all conditions..
  • UNIVERSAL FORMULATION – Fits a wide range of small 4T engines – Motorcycles, scooters, off-road dirt bikes, etc. FULL WARRANTY – Meets and exceeds all Japanese OEM warranty requirements..
Check Stock

TRIAX Synthetic OEM Grade Power Steering Fluid, Universal, Arctic Grade -50 Cold Flow, Fits Most Asian, US, and European Cars, Full Synthetic with Esters, Widest Spec Application (1 Quart)

  • Meets or exceeds the specifications requirements for most European, Asian, and US vehicles power steering / servo hydraulic steering systems in modern vehicles.
  • compatible with all types of seals materials in virtually all power steering systems.
  • universal top off and complete fill formula.
  • the green color mixes with any color power steering fluid.
  • Extremely high viscosity index assures superior control in both exceedingly hot and very cold climates (-50F).
  • Exceptional oxidation stability assures the fluid will not thicken or foul up with time.
  • very high heat tolerances without losing viscosity and properties.
  • contains high-quality elastomers and seal conditioners to maintain seal integrity for at least 150,000 miles.
  • contains top tier custom built optimized additive pack.
  • protects all metals including servo/power steering pumps from corrosion and rust.
  • ultra-rapid aeration and water separation.
Check Stock

AeroShell - 33 Airframe Grease 14oz MIL-PRF-23827C

  • Fully synthetic lubricating oil / Extreme temperature range / Resists burnoff / High temp, high-viscosity index formula.
  • Moisture barrier / Rust preventative / Excellent for trigger, slide & actions.
  • Precision needle tip applicator for firearms, fishing reels, knives, etc..
  • Long lasting mil-spec grease for AR 15 rifle building, superior adhesion essential for hot days and high bond strength for long term storage needs.
  • Lubrication performs under extreme pressure and heat to prevent damage.
Check Stock

Motorcraft - Oil - Engine XO5W305Q3SP

  • Top - quality motor oil for Ford, Lincoln and Mercury passenger cars.
  • American Petroleum Institute (API) - certified for gasoline engine service ILSAC GF - 5 and meets API SN or Energy Conserving.
  • Manufactured with high - viscosity index, premium - quality, synthetic base oils that provide good high - temperature and low - temperature....
  • Helps protect against high - temperature oxidation, low - temperature gelling, rust, corrosion and foaming.
  • Friction - reducing technology provides excellent wear protection and features energy - conserving characteristics, which offer significant....
Check Stock

Epoxy Adhesive Optically Clear High Impact,Two Part Low Viscosity AA-Bond F113 5gm Pouch

  • Spec. Gravity 1.23 g/cc Mixed Viscosity 175 cP At 25°C, Thixotropic Index 1.0.
  • Mechanical Properties Hardness, Shore D 86, Pot Life 1.5 hours, Refractive Index 1.51.
  • Glass Transition Temp (Tg), ultimate 102°C.
  • cure time 24 hrs At 25°C, 1-2 hrs At 65°C.
Check Stock

Aeroshell SHAEW155-12 15W50 Shell Aviation Oil 1 Quart 12 Pack

  • The non-ash forming, polymeric additive promotes engine cleanness.
  • High viscosity index semi synthetic oil protects engine components under high shear stresses.
  • Reduces oil consumption up to 50percent and fuel up to 5percent over straight grade engine oils.
  • Compatible with other approved aircraft piston engine oils.
  • performance allows for improved engine operation in temperature extremes.
Check Stock

Motorcraft Full Synthetic Motor Oil XO-5W20-QFS 12 Qt Case

  • Top - quality motor oil for Ford, Lincoln and Mercury passenger cars.
  • American Petroleum Institute (API) - certified for gasoline engine service ILSAC GF - 5 and meets API SN or Energy Conserving.
  • Manufactured with high - viscosity index, premium - quality, synthetic base oils that provide good high - temperature and low - temperature....
  • Helps protect against high - temperature oxidation, low - temperature gelling, rust, corrosion and foaming.
  • Friction - reducing technology provides excellent wear protection and features energy - conserving characteristics, which offer significant....
Check Stock

(2 Pack) Petrol Gel Food Grade Equipment LubricantNSF (2/4 oz. Tube)

  • Authorized by USDA as a lubricant for Use where incidental contact with food may occur, USDA rated h-1, FDA approved.
  • Technical white grease, impervious to water, will NOT taint, operating temperature 0-185 degrees.
  • Petrol-gel is the purest of lubricants, made with odorless, tasteless high viscosity Index paraffin base oil.
  • Petrol-gel is compounded with appropriate food grade additives to meet the performance demands for all Recommended applications.
Check Stock

Tractor Maintenance Log Book: Tractor Repair ,Servicing and Maintenance Logbook| Routine Inspection Log For Farmers and Company (Volume 13)

  • Odorless, tasteless high viscosity Index paraffin base oil.
  • Technical white grease, impervious to water, will NOT taint.
Check Stock

AA-Bond FDA22 FDA Medical Grade Epoxy Adhesive Two Part Room Temp Cure 5gm kit

  • Spec. Gravity 1.44 g/cc Mixed Viscosity 27,000 cP After mixing Pot Life 3 hrs solids contents % 100.
  • Hardness Shore D 78 Adhesive Bond Strength 2100 psi At 25°C Elong at Yield 5 % Color Light Tan.
  • Volume Resistivity 1.50e+14 ohm-cmDielectric Constant 3.5 At 1000 Hz Thixotropic Index 1.4.
  • Maxi Service Temp Air 293 °F Min Service Temp Air -76.0 °F CTE linear 26.1 µin/in -°F At Temp 68 °F.
  • Thixotropic Index 1.2 Cure Time 1.00 - 4.00 hour At 65°C 24.0 hour At 25°C Pot Life 180 min.
Check Stock