Categories

Best High Voltage Board

AC 50-220V 2000W 25A Motor Speed Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmerswith Speed Control Knob(5pcs)

  • Material: made of electronic components, internal conductor: pure copper..
  • Features: The module uses thyristors, with a withstand voltage of up to 1200V. The regulator has a peak voltage absorption circuit, which can effectively protect high-power thyristors, has a long service life and is more durable. High-quality CBB capacitors can withstand 630V DC withstand voltage..
  • Note: The module is connected to an AC voltage of 220V, so safety must be paid attention to during the debugging process to prevent electric shock accidents..
  • Specification size: high temperature resistant FR-4 circuit board circuit board 35MM * 48MM, external size: 48MM * 60MM (knob direction) * 26MM (height).
  • Package contains: 5 * 50-220V 25A AC motor speed regulator.
Check Stock

XYGStudy Raspberry Pi Expansion Board Power Relay Module for Raspberry Pi 4 3 2 Model B B+ A+

  • Raspberry Pi Expansion Board, Power Relay.
  • The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent..
  • Standard Raspberry Pi 40PIN GPIO extension header, Supports Raspberry Pi A+/B+/2B/3B/3B+/4B and later versions.
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.
  • Photo coupling isolation, prevent interference from high voltage circuit.
Check Stock

Buachois 2 Pcs 68x36mm 0.3W 5V Solar Power Solar Energy Panels Electric Motor STEM Kits Electronic Assembly Solar Powered Toy Kit for Boys and Girls

  • POLYSILICON PRODUCTS:The circuit board is made of high-quality polysilicon, with high photoelectric conversion rate, energy saving, good insulation....
  • MAIN FUNCTION:The circuit board is a device that directly or indirectly converts solar radiation energy into electrical energy through photoelectric....
  • SCOPE OF APPLICATION:The circuit board is usually used in solar garden lighting, small home lighting systems, solar street lights, outdoor solar....
  • ANTI-WIND AND ANTI-FREEZE:The circuit board adopts the design of anti-wind and anti-freeze, so that it can work normally in various environments, with....
  • MAIN PARAMETERS:The circuit board has a working voltage of 5V, an open circuit voltage of 6.2V, a working current of 0-60mA, a short-circuit current....
Check Stock

ARCELI Boost Buck Converter,Communication Constant DC - DC Voltage Current Step-Down Power Supply Module Buck Voltage Converter Voltmeter 50V 5ADPS5005+USB+BT

  • buck voltage converter input voltage range DC 6-55V, output voltage range 0-50V, output current range 0-5A, output power range 0-250W, output voltage resolution 0.01V, output current resolution: 0.001A..
  • Wireless & Wire Connection: it can connect with computer by Bluetooth, in the distance range of 5 meters.
  • or can connect by the USB communication board. User can remote monitor, voltage setting and current setting can be operated quickly..
  • Quick Operation: it is easy to operate converter with this, you can do voltage setting and current setting as quickly as possible.
  • you can also set it to cut off output when over voltage, over current and over power..
  • LCD Display: Built with color LCD display, it will be convenient for you to review preset voltage, input voltage, output voltage, preset current, output current, output power and brightness of LCD..
  • Package Including: 1x DC adjustable constant voltage power supply converter.
Check Stock

High Voltage DC-DC Boost Converter 1.5V-3V to 300V-400V 380V Adjustable Step-up Voltage Booster Power Supply Module

  • 3V DC boost power module, High-voltage sensors, Quiescent current 12mA, Size: 58x17x14mm/2.28x0.66x0.55inch.
  • Input voltage 3V, the output voltage adjustable range of 300V-400V (this circuit is not added voltage regulator circuit, the input voltage decreases the output voltage will drop)..
  • When the high voltage output is connected with a load, the on-board vibrator wiring terminal will have 3V voltage output (also can be connected in series with a LED and dozens of ohms resistanceas an indicator)..
Check Stock

Newest Raspberry Pi 8-Channel Relay Expansion Board 5V Power Relay Module for Raspberry Pi 4 3 2 Model B+ B Jetson Nano @XYGStudy

  • The RPi Relay Board (B) is an expansion board with 8-ch relays for Raspberry Pi.
  • It gives your Pi the ability to control high voltage products such as home appliances..
  • Standard Raspberry Pi 40PIN GPIO extension header, Supports Raspberry Pi A+/B+/2B/3B/3B+/4B and later versions, Jetson Nano.
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.
  • Photo coupling isolation, prevent interference from high voltage circuit.
Check Stock

Swivel Eye Hoist Hook - 2 Ton

  • [HIGH QUALITY ANTENNA, SWITCH BUTTONS & CIRCUIT BOARD]: The remote control distance is 100 meters, 360 degree barrier-free with strong penetration and no need to aim. The transmitter adopts high-performance metal contact button for durability, with a good performance circuit board. Besides, it is IP65 Class product, performing excellently in harsh environments such as high oil pollution and high humidity..
  • [EXCELLENT NYLON CASE]: The wireless remote control is made of PA66 reinforced flame retardant nylon, which has strong ability to against pressure and corrosion..
  • [EASY INSTALLATION]: To facilitate your installation, we provide detailed description and a color printing instruction manual..
  • [KEY FUNCTION MODIFICATION]: Connecting with the computer WIN7/XP system through the special data line (needed to purchase separately), you can set the function of keys by yourself..
  • [HUMANIZED DESIGN]: This hoist crane remote control is equipped with a magnetic key switch that can be used in emergency situations. With the battery voltage warning device, the circuit can be cut off automatically when the voltage is insufficient..
Check Stock

AOICRIE 12V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit PiC ARM AVR

  • ★12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
  • ★Equipped with high-current relay, AC250V 10A.
  • ★The control signal voltage range: the trigger signal is low 0-2V.
  • ★Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
  • ★DC 12V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit.
Check Stock

Tynee Mini 2 Electric Skateboard Longboard with Remote,30 mph top Speed,25 Miles Range,850W*2 Belt Motor,Suitable for Adults & Teens,6 Months Warranty

  • 12S (50.4V) high voltage power system. More power, higher efficiency,less voltage sag.Tynee mini 2 uses the 12S (50.4V) high voltage power system.Compared with other boards with 10s (42V) power system.it has more torque,faster speed,higher efficiency,less voltage sag and less heating.It has better performance and durability..
  • The famous Molicel battery.More reliable,longer battery life.Battery is the most important and most expensive part in a board,Tynee mini 2 uses the famous Molicel 363Wh batteries.Now many brands widely use unknown battery cells.Tynee insists on using high-quality Molicel battery cells,which will get better performance,longer circle life and more safety..
  • The latest 12s ESC, Smoothest control experience in the industry.It is recognized as the smoothest controller (ESC) with stable and reliable quality. Tynee mini 2 uses the latest 12S ESC which can support the replacement of hub and belt motors and smart turn on/of function..
  • 850W*2 belt motor.Most powerful mini electric skateboard.Two 850W belt motors with 50.4V high voltage power system make it to be the most powerful mini board on the market.Belt motors have stronger acceleration and braking,which will make you feel confident when you ride it..
Check Stock

2Pcs Digital Amplifier Board,TPA3116D2 Dual Channel Audio Stereo AMP High Power Digital Subwoofer Power Amplifier Board 2x50W 5V 12V 24V for Store Solicitation Home Theater Square DIY Speakers

  • The power amplifier board is made of high performance Original chip TDA3116D2, 2 channel stereo amplifier, 2x50W output power.
  • This digital amplifier is made of Use high-performance inductors and high-performance capacitors..
  • The digital amplifier board is operated by wide working voltage DC4.5-26V(24V recommended)with reverse connection protection,and it is highly recommended for 4-8 ohm speakers.
  • The TPA3116D2 device features short-circuit and thermal protection as well as over-voltage, under-voltage and DC protection to prevent complete failure..
  • TDA3116D2 is widely used in store solicitation, home theater, square speakers, etc.due to its excellent performance and comprehensive cost performance..
Check Stock

DZS Elec 6pcs XL6009 DC-DC Booster Converter Module 3V-32V to 5V-35V 4A Adjustable Step-up Voltage Regulator 5V 9V 12V 24V Power Supply Module

  • XL6009 DC-DC Adjustable Booster Power Converter Module, High efficiency non-isolated booster module can be used for booster voltage stabilizer power supply, DIY adjustable mobile power supply, booster charger, etc..
  • Input Voltage: 3V-32V, The optimal operating voltage range is 5-32V.
  • Output Voltage: 5V-35V Continuing Adjust (Step-up module, output voltage is higher than input voltage).
  • Input Current: 4A (max) Non-Load 18mA (The higher voltage, the greater no-load current.).
  • The booster power board is equipped with 4A high-efficiency MOSFET switch tube, with the conversion efficiency up to 94%..
  • Ultra high switching frequency 400KHz, the filter capacitance with small capacity can achieve very good effect, smaller ripple and the volume..
Check Stock

WOWOONE dc to dc Step up Converter DC Voltage Regulator Voltage Converter Step Up dc Boost Converter USB Power Module Supply Module 2V-24V to 5V-28V 2A MT3608 Mico USB (Pack of 10)

  • ❥Mini DC-DC voltage converter board with micro USB voltage input,just connected with USB power adapter then you can get 9V 12V 18V 24V voltge..
  • ❥DC 2-24V input and 5V-28V adjustable voltage output with high power conversion efficiency up to 93%..
  • ❥Maximum Output Current: 2A, Board Size: 30 X 17 X 14mm/1.18 X 0.67 X 0.55inch(L*W*H)..
  • ❥MT3608 includes under-voltage lockout, current limiting, and thermal overload protection to prevent damage in the event of an output overload..
  • ❥Widely used for storage battery, power transformers, DIY adjustable regulated power supply, industrial equipment, 5V, 9V, 12V, 28V output, etc..
Check Stock

H HAILONG 36V 4.4AH Lithium ion Battery 36v Battery Replacement

  • 【High capacity Battery】 The battery is 10S2P, and its voltage and capacity is 36V 4400mAH. True battery capacity is better for you to move scooter. Battery size Size: 5.3*2.95*2.36in (135 * 75 * 60mm) Size: 5.3*2.95*2.36in (135 * 75 * 60mm).
  • 【Reliable Us Delivery】 Package will be delivered to you in 3-7days.2 months return and exchange..
  • 【Quality BMS Protection】 Built-in intelligent circuit protection board, with over charge protection, over discharge protection, short circuit protection, over voltage protection, load protection, high temperature protection and other functions..
  • 【Long Life Battery】Home to 1000 times cycles,long battery life.High temperature resistance (-85-392°F), high voltage resistance (≤600V), corrosion resistance, aging resistance, etc..
  • 【Notes】 This battery only match 36V device, please make sure this 36V 4.4Ah battery.To avoid unnecessary returns, please confirm battery parameter(size and voltage) before purchasing..
Check Stock