Categories

Best High Voltage Module

DC High Voltage Generator, Generator Electric Arc Module DC3.6V/4.8V/6V/12V High Voltage Pulse Generator DC 3kV-11kV Super Electric Arc Module for Nebulizers,Electric Guns

  • PORTABLE AND EASY TO USE --- The high voltage transformer generator is small, lightweight and portable.
  • EASY TO USE --- The high voltage generator installation and operation process is very simple, its peripheral circuit is very simple, you only need to connect the switch and battery. You don't have to worry about not using it at all.
  • INPUT VOLTAGE --- The high-voltage arc generator can output high-voltage current, with small size and high efficiency. The input voltage is DC3.6V/4.8V/6V/12V and will output DC3kV-11kV high voltage.
  • WIDE APPLICATION --- The High Voltage P-ulse Generator can be used for electric gun salute, gas stove, etc.
  • GOOD PERFORMANCE --- This module is the finished module of the high-voltage negative ion generator with the help of high-voltage current output and boost power supply module.
Check Stock

DZS Elec 6pcs XL6009 DC-DC Booster Converter Module 3V-32V to 5V-35V 4A Adjustable Step-up Voltage Regulator 5V 9V 12V 24V Power Supply Module

  • XL6009 DC-DC Adjustable Booster Power Converter Module, High efficiency non-isolated booster module can be used for booster voltage stabilizer power supply, DIY adjustable mobile power supply, booster charger, etc..
  • Input Voltage: 3V-32V, The optimal operating voltage range is 5-32V.
  • Output Voltage: 5V-35V Continuing Adjust (Step-up module, output voltage is higher than input voltage).
  • Input Current: 4A (max) Non-Load 18mA (The higher voltage, the greater no-load current.).
  • The booster power board is equipped with 4A high-efficiency MOSFET switch tube, with the conversion efficiency up to 94%..
  • Ultra high switching frequency 400KHz, the filter capacitance with small capacity can achieve very good effect, smaller ripple and the volume..
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
  • AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
  • Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
  • Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
  • Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protectio....
Check Stock

Juried Engineering LM393AP LM393 Precision Dual Differential Comparator, Industrial Grade IC DIP-8 Breadboard-Friendly (Pack of 20)

  • The module is made of high‑quality components and processed with stable performance. It can be widely used in various voltage measurement and control applications..
  • The controller presets 5 different functions and can customize and add other specific functions according to the user's needs..
  • Increase the automatic power saving function, the user can set it autonomously. All setting parameters can be saved automatically, and the setting contents will not be lost when power is off..
  • The voltage monitoring module is a multi-function voltage monitoring controller that uses an industrial-grade microcontroller as the main control unit with a wide measurement range and high accuracy..
  • The user can set the upper voltage limit and the lower voltage limit. Measurement range is 0-100V DC, measurement accuracy +/-0.1V. Newly added 0-99.9 seconds delay pull and 0-99.9 seconds delay off function..
Check Stock

High Voltage Generator, Small Size 40Kv-50Kv Ac High Voltage Output High Voltage Pulse Generator, for Transformer, Small Scientific Production

  • The module can output high voltage pulse current, small size and high efficiency.
  • This module is the finished module of transformer/booster for small scientific production.
  • The input voltage is 3.6V/4.8V DC and will output 40kV-50kV AC high voltage.
  • It can be used as security equipment accessories, gas range ignition, or for electrostatic adsorption experiment.
  • The peripheral circuit is simple, simply connect the switch and battery, and the discharge is great.
Check Stock

UMLIFE 4PCS AC/DC to DC Step Down Buck Converter AC 5-30V DC 5-48V 24V 36V 48V to DC 2.5-35V 12V Voltage Regulator Board 2A Adjustable Volt Power Supply Module

  • 4PCS LM2596HV AC/DC to DC Buck Step Down Converter Module 3v 3.3V 5V 6V 9V 12V 15V 24V DC 5V-50V Adjustable Step-Down 3A Power Supply.
  • Adjustable AC/DC to DC buck converter power supply module Voltage Regulator.
  • Input ac voltage AC5V~AC30V or dc5v-50v. Due to the large fluctuation of ac voltage, the recommended ac voltage range has been reserved..
  • The power module adopts plug-in LM2596HV, LM2596 version of high voltage, the highest input voltage is 50V(limited by filter capacitor voltage) with external radiator, can withstand high current work..
  • Input voltage range: AC 5V-30V, DC 5V-50V Output output range: DC 3.3V-33V.
Check Stock

Isolation Amplifiers Isolated Modulator (5 pieces)

  • ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
  • ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
  • ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
  • ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
  • ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock

Juried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 Breadboard-Friendly (Pack of 1)

  • DROK micro voltage converter with low voltage input range DC 4.8-35V, positive and negative dual output voltage is ±15V, rated output current is 660mA..
  • APPLICATION: the step-up regulator module is suitable for sensor, operational amplifier, audio and other devices that needs positive-negative power output..
  • SMALL MODULE HIGH EFFICIENCY: DROK boost converter is with small dimension 64x27.5x12.5mm.
  • the small module conversion rate can be up to 88%..
  • TWO MOUNT METHODS: the volt transformer module not only support row pin welding, but also lead mounting, which will be convenient for your use..
  • NOTE: please note that although the module is with short circuit protective function, it can not in long continuous short circuit, or it will be damaged..
Check Stock

High Voltage Pulse Generator DC 6-12V 0.5-1 Million V Super Arc Pulse Ignition Transformer Boost Step-up Coil Module for Cigarette Lighter (901-c2)

  • [High Quality] The pulse generator is made of high quality material, it has long use life, high reliability and durability..
  • [Powerful] After the input of DC 6-12V voltage, a dc high voltage of about 10,000V (about 1-2 cm of arc) can be obtained at the output end, small size and high efficiency..
  • [Feature] The boost step-up coil module can generate high temperature and high frequency arc to easily ignite combustible such as smoke, paper and candle. There are two models of pulse generator for choice, including 901-2(work continuously for 10s) and 901-c2(work continuously for 1 min)..
  • [Good Performance] According to the tesla coil principle, the module outputs high voltage pulse current, thus it will generate the electric arc between the two wires. The peripheral circuit is simple (simply connect the switch, install the battery), the discharge intensity is violent..
  • [Application] This module is mainly used for high school science experiment, electronic instrument, negative ion generator, high voltage ignition, DIY science products and more..
Check Stock

Dasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer

  • 【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
  • ultra-low input and output pressure difference..
  • 【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
  • 【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
  • 【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
  • the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
  • 【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
Check Stock

12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

Boost Buck Converter, DC 6-55V to 0-50.00V Wireless Digital Adjustable Programmable Step-Down Communication Version Buck Power Supply Module LCD Constant Voltage Buck Converter(DPS5005)

  • The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one..
  • This module has power-down stored function and can store 10 groups preset value..
  • Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required..
  • LCD display on the module has the function digital voltmeter and ammeter..
  • On the setting data interface, you can adjust over-voltage value, over-current value, over-power value, data set and LCD brightness.This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied..
Check Stock