Categories

Best High Voltage Tffn

Valefod 10 Pack DC to DC High Efficiency Voltage Regulator 3.2-35V to 1.25-30V Buck Converter DIY Power Supply Step-Down Module

  • 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects..
  • 【Input Voltage】DC 3.2V to 35V (input voltage must be 1.5V higher than the output voltage, no boost)..
  • 【Output Voltage】DC 1.25V to 30V voltage is continuously adjustable, maximum output current is 3A..
  • 【Mini Size】45 * 23 * 14 mm (with potentiometer). 10pcs included..
  • 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V).
Check Stock

Non-Contact Voltage Tester, Dual Range Voltage Tester AC 12V-1000V/48V-1000V, ENGiNDOT Live/Null Wire Tester, Electrical Tester with LCD Display, Buzzer & Light Alarm, Breakpoint Test (Blue)

  • 【Safety Non-Contact Voltage Tester】Non-Contact Voltage Tester is safer for testing all Electric Appliances in Your Family. The tester with NCV inductive probe for AC voltage Just places the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire..
  • 【 High-Efficiency And Convenient 】The tester with LCD display. When the voltage is detected, the alarm will send out green or red light and beep. When the higher the sensed voltage or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the screen will be red or green, red means the high voltage and live wire are detected, green means the low voltage and null wire are detected..
  • 【DUAL RANGE/ High&Low Sensitivity】The sensitivity/flashlight key can be switched at high and low sensitivity. Detect high and low voltage (AC 12-1000V /48-1000V )Press the S button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring..
  • 【Multifunction Design 】Use the Non-Contact Voltage Detector in Circuit Breakers, Lighting Fixtures, Switches, Outlets, Wires, and Anywhere You Need it. Bright LED flashli....
Check Stock

Non Contact Voltage Tester Pen, Electrical Tools Electrical Tester AC 12-1000V/48V-1000V, LED Flashlight, Buzzer Alarm for Live/Null Wire Tester Judgment, Wire Breakpoint Finder

  • 【SAFETY FIRST】 : It will send out multiple alarms through sound and light. When the voltage is detected, the tip will send out red light and beep. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the light will be red or yellow, red means high voltage and live wire are detected, yellow means low voltage and null wire are detected..
  • 【Accurately Multi-ranging Measurement】The electrical tester accurately detects AC Voltage ranging from 12V to 1000V, and distinguish them into 2 Voltage levels (low, high). NCV sensitivity automatically adjusts from low and high while indicating Voltage level with audible beep..
  • 【High Efficiency】 Press and hold the switch for two seconds to start the machine, As Long As Voltage is Detected, the Led in the Tester Pen will Shine.
  • 【COMPACT DESIGN】 Bright LED flashlight for work in dim ares.
  • Low-Power-Indicator when battery voltage is below 2.5V.
  • Automatic Power Off after 3 minutes without operation or signal detection.
  • Pocket-sized, pen hook allows you to carry it in your shirt pocket..
  • 【SECURITY LEVEL】 IEC rated CAT III 1000V CAT IV 600V, Meets CE requirements.
  • The electrical tester is safely double insulated. High Voltage Aler....
Check Stock

Antimicrobial,Yes ADA,110 to 127 VAC,Automatic Hand Dryer

  • The Airblade V HU02 Sprayed Nickel is available in 2 different voltage options - Low Voltage (100V/120V) and High Voltage (200V-240V) - make voltage selection at checkout.The Airblade V HU02 Sprayed Nickel is available in 2 different voltage options - Low Voltage (100V/120V) and High Voltage (200V-240V) - make voltage selection at checkout..
  • Airblade V HU02 is 30% quieter (79dB) than the previous generation (Airblade V AB12) -.
  • The high-speed Airblade V HU02 dries your hands in 12 seconds), but uses less energy than the previous generation (AB12 V) to do so..
  • The newly redesigned 1000 Watt motor now costs even less to operate.
Check Stock

Non-Contact Voltage Tester Pen - Dual Range AC Voltage Tester 12V/48V-1000V, Live/Null Wire Circuit Detection Tester Breakpoint Finder Electrical Outlet Voltage Detector, Measure AC Circuit Tester

  • Safety and Security: Non-contact voltage tester has passed the CE CAT III 1000V CAT IV 600V test certification. When the ac electrical tester pen detects a voltage, the probe will flash red and beep, the higher the detected voltage, or the closer it is to the voltage source, the dual range voltage detector will beep at a higher frequency. The ac socket tester detects low voltage and neutral and triggers a yellow flashing light, and detects high voltage and live wire triggers a red flashing light.
  • Non-Contact: The ac circuit tester uses a non-contact method to measure voltage, with an NCV induction probe for detecting ac voltage, you only need to place the tip of an electric circuit detector near an outlet or power cord to detect the presence of voltage.The dual range circuit voltage tester is a safe double insulation, you don't have to worry about being shocked, voltage detector tool is very safe, and it is an ideal device to help determine the neutral or live line and breakpoint testing.
  • Dual Range: The electrical current tester detects standard voltage and low voltage ranges (12-1000V AC / 48-1000V AC), making the measurement more flexible and accurate. NCV sensitivity is automatically adjusted from low to high, low sensitivity can detect doorbells, ....
Check Stock

Ignition Coil Module, Pulse Generator High Voltage with Pulse Generator for Replacement for Electronic DIY for Product Development

  • It can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science..
  • After the input of dc 3.0V-6V voltage, a dc high voltage of about DC200KV(about 1.5 cm of arc) can be obtained at the output end..
  • According to the coil principle, the module outputs high voltage pulse current, small volume and high efficiency..
  • The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge is violent..
  • Used for high voltage production, electronic DIY, product development, high voltage electronic security, etc.
Check Stock

Securitron AQU126 Power Supply, 6 Ampere/12V DC

  • 300W high voltage power supply with single output, you can use it to generate the high voltage output..
  • Application: High voltage electric field, clean air, clean smoke, electrostatic air cleaner etc..
  • This high voltage power supply has shortcut protection and preventing spark-over protection..
Check Stock

High Voltage DC-DC Boost Converter 1.5V-3V to 300V-400V 380V Adjustable Step-up Voltage Booster Power Supply Module

  • 3V DC boost power module, High-voltage sensors, Quiescent current 12mA, Size: 58x17x14mm/2.28x0.66x0.55inch.
  • Input voltage 3V, the output voltage adjustable range of 300V-400V (this circuit is not added voltage regulator circuit, the input voltage decreases the output voltage will drop)..
  • When the high voltage output is connected with a load, the on-board vibrator wiring terminal will have 3V voltage output (also can be connected in series with a LED and dozens of ohms resistanceas an indicator)..
Check Stock

Micsig DP10007 High Voltage Differential Probe Kit, Oscilloscope Probe Kit, 100MHZ 700V

  • 【Maximum differential test voltage】 Comes with 70V-700V measurement range, you can safely measure up to 700V floating voltage and up to 100 MHz bandwidth..
  • 【High voltage conversion】The testing probe kit can convert the input high voltage signal to low voltage signal for oscilloscope observation and analysis..
  • 【Safer to use】High-impedance isolation between the sampling input and output of the high-voltage differential probe to protect personal safety..
  • 【Multifunctional kit】All 6 pieces come with three different connectors, which are helpful for various tests on different occasions..
  • 【Wide application】The attenuation rate is 10X/100X, which is widely used in most of oscilloscope..
Check Stock

DP10007 Oscilloscope Probe, DP10007 100MHZ 700V Probe, High Voltage Accessory for Voltage Testing

  • The attenuation rate is 10X, which can be used in any brand of oscilloscope, meet the needs of floating measurement..
  • DP series high‑voltage differential probes, specially designed for the measurement of high‑voltage differential signals..
  • High‑voltage differential probes sample high‑impedance isolation between input and output to protect person safety..
  • The power supply adopts USB DC 5V output and has a USB interface, which is easy to use and carry..
  • Convert the input high voltage signal to low voltage signal for oscilloscope observation and analysis..
Check Stock

DC12V Power Supply Door Access Control System, 5A Adapter 110-240V

  • Application occasion: High voltage electric field, electrostatic air cleaner, electrostatic field, clean smoke, air purifier, air ionizer, etc..
  • 50W high voltage power supply with single output, you can use it to generate the high voltage output..
  • Shortcut protection and preventing spark-over protection..
Check Stock

15KV High Voltage Arc Pulse Generator, 3.7V~4.2V Input 15KV Output High Voltage Pulse Igniter Coil Generator Module Disassembled Parts

  • 【Application】 - It can be used for anion generator, electronic instrument or scientific experiment..
  • 【Very Popular】 - There are 2 sets in disassembled pieces that are very popular with electronics enthusiasts..
  • 【Parameter】 - The input voltage is 3.7 V ~ 4.2 V DC and outputs a high voltage of 15 kV AC..
  • 【Features of high voltage generator】 - The module can output high voltage pulse current, small size and high efficiency..
  • 【High Temperature Arc】 - Issue a high temperature, high voltage arc that could easily ignite paper or plastic..
Check Stock

Malibu Low Voltage Landscape Light 1W LED Pathway Light 12V Outdoor Black Lighting 60 Lumen 3000K Warm White Walkway Light with Connector and Stake 8406-2104-01

  • 1W Low Voltage Landscape Pathway Light: This pathway light use universal 12V AC low voltage safe working voltage, which can be applied to most low-voltage lighting systems. It only use 1W that produce 60 Lumen of 3000K warm white that ideal for outdoor installations, lighting pathway, garden.
  • Easy Installation: This low voltage landscape pathway light include 1 cable connector and 1 spike stake. Compared with complicated wiring methods, this landscape light with cable gland can high-quality construction that directly connect low voltage cables , wiring work does not require splicing/crimping, you just insert the light spike stand into the suitable position on ground（It is better to use a shovel) and put the connector on each side of the cable and press to lock.
  • Safe & Durable: 12V safe working voltage. This means that in the event of a broken wire or light, no one will be electrocuted! Safe for person or pets around, no risk for outdoor use. All cast aluminum construction which can effectively weatherproof, enables it to withstand tough weather conditions over time so that your home can be a beautiful painting on rainy nights.
  • Low Voltage System: Working voltage 12V AC, compatible with most low voltage landscape lighting systems. This pathway light us....
Check Stock