Categories

Best High end Performance

Massive Audio FC6.3 – 6 Inch / 6.5 Inch 3-Way, 150w/300 Watts Max, 6.5 Inch Mid-Bass, 3 Inch Mid-Range, 25mm Tweeter, 4 Ohm, 12db X-Over, Component Kit Speakers. Pair

  • HIGH QUALITY CAR AUDIO SPEAKERS | Looking for high end car audio speakers that will not break the bank? Our high performance component speakers are some of the very best replacements for your factory or aftermarket speakers! These high fidelity speakers have a mounting depth of only 2.4 Inch and churn out high end sound quality with its 6.5 Inch + 3 Inch Drivers. High-Energy Y30 Magnets assures the sufficient magnet force needed for high sensitivity and accurate sound reproduction..
  • SOLD AS A KIT | GREAT SOUND QUALITY | These Car Audio Speakers outperform most aftermarket component speakers period! These great sounding 6.5 inch Component speakers Feature: 150 Watts RMS / 600 Watts MAX / @ 4 Ohm, 93dB, 50Hz - 20KHz, Fully Isolated Tinsel Leads to Eliminate Crosstalk, High Quality Cloth Spider With Polyester Fiber, and 25mm Silk Diaphragm Tweeter With Ferro Fluid..
  • GUARANTEED TO LAST | Are you frustrated with factory car door speakers that crack, snap and pop or even blow out over time? These heavy duty, high end car audio speakers are guaranteed to last! Built with Custom External 12dB Linkwitz–Riley Crossovers and Custom Designed Pole Piece for Low Distortion and ....
Check Stock

JIANXING 4mm 5mm 6mm Carbide Square End Mill Set,4 Flute Cutting Tools,HRC 55 Deg,Tialn Coating，Straight Shank Square Nose End Mills Cutter,CNC Router Bits,Widely Used in Alloy Steels/Hardened Steels(1 Set)

  • 【Cnc 4-Flute End Mill 】Adopt Modern Grinding Machine Equipment For High-Precision Grinding. Resists Wear And Offers High Cutting Performance.
  • 【Material】: Carbide With Tialn Coating For HRC 55 Deg, The Tialn Coating Has Stable Performance And Is Not Easy To Wear Under High Temperature Environment. It Has Higher Hardness And Wear Resistance And Excellent Cutting Performance.
  • 【The 35 degree helix angle design】 Greatly Improves The Production Efficiency, Sharp And Durable, Convenient For Chip Removal.
  • 【Applicable materials】 Include Ordinary Steel, Carbon Steel, Alloy Steel, Hardened Steel, Cast Iron, Etc. The End Milling Cutter Bit Is Suitable For Plane / Side Milling, U-Groove Milling And Other Additive Methods..
  • 【Package Included】: 1set (4mm+5mm+6mm) Carbide End Mill.
Check Stock

Carpenters' End Cut Pliers-Hammer Head Style

  • Premium Material:This end cutting nipper is made of forged alloy tool steel Cr-Ni for long lasting performance, laquer treatment on surface to prevent rust.
  • Sharp Jaw Cutting:Blades are induction hardened to HRC 58-64 for superior cutting performance and durability.
  • Non-slip Handle:This 7 inch end niper plier with no-slip red cushion rounded handle offers comfortable grip.
  • Multi-Functions:High-leverage design and round head profile for easily cutting off nails and screws, trim wires, and pulling out nails and staples, light but smooth construction, easy to open and close in your hand.
  • Wide Application:The end cutting plier is good at construction, floor installation, carpentersfor cutting copper, aluminum, steel, and piano wire in solid, stranded, or braided forms.
Check Stock

Massive Audio HIPPO84V2 – 8 Inch Car Audio Subwoofer, High Performance Subwoofer for Cars, Trucks, Jeeps - 8\ Subwoofer 500 Watt RMS, 1000w MAX Dual 4 Ohm, 2.5 Inch Voice Coil. Sold Individually

  • ... Cast Aluminum 8” Subwoofer worthy of its namesake HIPPO. Each HIPPO84V2 is designed and engineered in the U.S.A. to deliver the low-end Punch that great systems deserve. From its Kevlar Fiber Reinforced Non-Pressed Paper Cones to the double stacked 100oz Strontium Magnets it’s apparent this is one serious High-Performance Subwoofer..
  • MASSIVE FEATURES & VALUE | Our HIPPO84V2 with its Dual 4 Ω, 2.5” High Temperature Voice Coils, thick Cast Aluminum Basket, Heavy Duty Triple Tinsel Leads can be used in a Sealed or Ported enclosure and has dual over-sized mirror image Poly / Nomex Spiders allowing maximum excursion while assuring linear alignment of the Voice Coils within the magnetic gap..
  • WHY YOU NEED THIS | A balanced sound system requires a Subwoofer that can provide both a deep bottom end you can feel and the low-end punch you can hear. Upon listening, you’ll agree that the HIPPO84V2 delivers on both counts and as with all Massive products, the high performance and value are built in..
  • QUALITY TESTED AND CUSTOMER ACCLAIMED | Power handling is rated conservatively at 500 Watts RMS and 1000 Watts Peak yielding an SPL of 88db with just 2.8 Volts. Each Massive Audio product geos under an extensive QC process to ensure performance and reliability....
Check Stock

CORSAIR Dominator Platinum RGB DDR5 32GB (2x16GB) DDR5 5600 (PC5-44800) C36 1.25V - Black

  • Welcome to the Cutting-Edge of Performance: Push the limits of your system like never before with DDR5 memory, unlocking even faster frequencies, greater capacities, and better performance..
  • Do it All, and Do it Faster: As modern CPUs feature more and more cores, the unprecedented speed of DDR5 ensures your high-end CPU gets data quickly, enabling faster processing, rendering, and buffering than ever before..
  • Onboard Voltage Regulation: Makes for easier, finely-tuned, and more stable overclocking through CORSAIR iCUE software than ever..
  • Patented CORSAIR DHX Cooling: Keeps DDR5 temperatures down by cooling both the ICs and the ground plane of the PCB itself with its own dedicated heatspreader, ensuring high performance even under extreme loads..
  • Custom Intel XMP 3.0 Profiles: Customize and save your own XMP profiles via iCUE to tailor performance by app or task for greater efficiency..
  • Powerful CORSAIR iCUE Software: Enables dynamic RGB lighting control synchronized across your entire iCUE setup, real-time temperature and frequency readings, onboard voltage regulation, and custom XMP profiles..
  • World-Renowned Style and Design: DOMINATOR PLATINUM RGB DDR5 combines precision forged aluminum, die-casting, and anodization, complementing the most powerful and r....
Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
  • This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill router bits are used for side milling, end milling, finish machining, etc..
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Fanmusic Topping L70 Full Balanced NFCA Headphone Amplifier 4Pin XLR/4.4 Balanced/6.35mm SE Output Amp with Remote Control (Black)

  • Ultra-High Performance NFCA modules: L70 uses same NFCA (Nested Feedback Composite Amplifier) module with A90. Voltage current hybrid feedback architecture along with UHGF (Ultra High Gain Feedback) technology provide excellent DC and AC performance, ultra-low THD+N and absurdly high dynamic range of 146dB. Even more, high output current drive capability, ultra-low output impedance and the ultra-low noise of 0.3uV which is miles ahead of the competition provide sufficient guarantee for driving headphones with various characteristics, sO that high-fidelity music can be vividly performed on different headphones..
  • 4-Pin-XL R/4. 4mm balanced/6. 35mm SE: The L70 is compatible with common headphone jacks including: 4-pin XLR balanced, 4.4mm balanced, 6.35mm single ended, and 3.5mm single- ended. The built- in fully balanced amplifier circuit can not only fit well with balanced headphones, but also have perfect performance with single -ended headphones..
  • Compatible with almost all kinds of headphones: L70's output has high output voltage, high output current, low noise, low output impedance, sO no headphones that can't be dealt with. High output voltage can easily drive high impedance headphones.
  • High output current allows low-sensitivity headphones to obtain....
Check Stock

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials and high temperature alloys.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.
Check Stock

Proforged 104-10529 Tall Outer Tie Rod End

  • TALL TIE ROD ENDS FOR ULTIMATE PERFORMANCE. Proforged tall tie rod ends are built with a longer ball stud to reduce bump steer on lowered vehicles - dramatically improving your handling. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
  • 1,000,000 MILE WARRANTY. You can install our tall tie rod ends with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A TIE ROD END? A tie rod end (also known as a tie rod) is part of....
Check Stock

Shure SM137 Cardioid Instrument Condenser Probe Microphone with Thin Diaphragm, Class-A Preamplifier, 15db Pad for Performance Consistency, Low Self-Noise, Plus Mic Clip and Zippered Pouch (SM137-LC)

  • Ultra-thin diaphragm for smooth high end and tight, controlled low end.
  • 15dB pad for performance consistency across a wider range of high SPL sources.
  • Low self-noise and transformerless preamplifier circuitry.
  • Cardioid instrument condenser microphone offers natural sound reproduction in both acoustic and high volume performance applications.
  • Features include a thin diaphragm, a Class-A preamplifier, pad for performance consistency, and low self-noise.
  • The SM137 is a versatile, flat-response cardioid condenser probe microphone.
  • Furnished accessories include Swivel Adapter and Zippered Pouch.
Check Stock

CAPiTA Mercury Wide Snowboard Mens Sz 158cm

  • Design: Directional Twin Hybrid Rocker - This high-end all-mountain directional twin is far superior to some one-trick pony freestyle snowboard..
  • Specialty: Park/Groomers/Pow - This high-end all-mountain Directional Twin Hybrid Rocker stick is designed to do everything..
  • Quadratic Sidecut - Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style..
  • Sintered, Stone Ground Base - High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded..
  • Performance Core - High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light..
Check Stock

HIFIMAN EF400 Desktop Balanced Headphone DAC& Amplifier with Himalaya R2R DAC, 3.5/4.4/6.35mm Output for Home Audio

  • ...compact footprint and price to match, but with sonics that outperform products many times its size. Ultra-high efficiency and low power consumption at maximum stability:4.4W per channel balance output. Embedded with HIFIMAN HIMALAYA R2R DAC- Recipient of 2022 VGP Gold Technology Award (Japan)..
  • Experience the prized performance of the R2R DAC: HIMALAYA is a discrete R2R DAC (digital-to-analog) module that is based on the FPGA algorithm. The combinations of its low audio frequency range, out-of-band noise, and low energy consumption make it a perfect match for high-performance audio equipment. The HIMALAYA DAC module supports the standard PCM music signal transmitted by the most common IIS (Integrated Interface of Sound) audio interface, with a maximum resolution of 24Bit..
  • Full Balance: The four-channel differential structure features a DAC, buffer and active filter that add up to unbeatable fully balanced output for stunning performance from a Class AB DAC/amplifier. The four-channel fully differential amplifier circuit features a maximum output of 10.7 Vrms (THD.
  • 4-level Function Switch: High Gain NOS, High Gain OS, Low Gain OS, Low Gain NOS ★Headphone Out (Front Panel): 6.35mm Single-ended.
Check Stock