Categories

Best High frequency Signal Isolators

FC-3000P Ham Radio CB Frequency Counter 27Mhz-3000Mhz - High Sensitivity with CTCCSS DCS Decoder for The VHF & UHF - CB Continuous Carrier Signal, Walkie-Talkies, DMR Radio Transceivers

  • ✔️ IDENTIFYING FREQUENCY - The frequency meter measures frequency parameters of the continuous carrier signal walkie-talkies , with signal strength indicator..
  • ✔️ PORTABLE FREQUENCY COUNTER - Counting continuous wave signal comes from Two-way Radio. VHF & UHF frequency measurement, useful for the CB amateur Ham Radio..
  • ✔️ FREQUENCY COUNTER METER RANGE - CB, HAm Radio, DMR frequency range 100Mhz-3000Mhz. Build-in DCS CTCSS Decoder Low PPM crystal time base used to achieve high accuracy measurement.
  • ✔️ EASY TO OPERATE - User friendly controlled with four buttons. The DMR radio frequency counter is compact and handy when needed..
  • ✔️ 100% MONEY BACK GUARANTEE 2 YEARS WARRANTY ensures this will quickly become your favorite no-risk purchase..
Check Stock

Padyrytu 400W Speaker Crossover 2 Way High-Low 4-16 Ohm Frequency Divider for Speaker 304142, motherboard red

  • Professional High-quality Crossover：This is a professional frequency divider, which is widely installed in the speaker. Playing an important role of the total frequency signal segmentation. Treble and bass dual frequency support, helps to transmit the treble signal to the tweeter unit, and divide the bass signal into subwoofer unit.
  • Perfect HIFI Sound Quality：Make the treble clear and increase the intensity of the bass, freely enjoy clear and natural music.To separate the mixed audio signal into a treble, bass, and then were sent to the corresponding treble, bass speaker unit in playback, resulting in enhance the sound quality purposes.
  • High Quality and Super Durability: wire wound ceramic resistor and high-quality metal film capacitors, ensure its large load power, long-term durability, never burnout.Large capacity, reasonable design, beautiful appearance, circuit board design with precise cutouts and lines, free for welding, very suitable for DIY.
  • Treble and Bass dual Frequency Dividing: It can be used in a wide range. It can be used with tweeter + bass two-way frequency speakers, 2.1 mid-high-range small satellite boxes and car full-range speakers, and can also use single-use treble or single-use bass. Speaker impedance of 4-16 ohms can be used, ....
Check Stock

PRV AUDIO EQ7-15 7 Band Graphic Equalizer 15 Volt RCA Line-Level Output with Fader and Subwoofer Level Control for Car Audio

  • Fully Adjustable: Built unlike other EQs, ours focuses on the ability to give you the POWERFUL signal required to get the most out of your custom sound system..
  • Tailor Your Sound: Combining its high 20dB headroom capability with 15 volts outputs make this audio equalizer capable of high signal performance, ensuring that your amplifiers will get a clean, powerful signal for maximum performance..
  • Effortless Control: Graphic equalizers are quite simple on the EQ7-15 it features one control for each frequency band present. These knobs allow you to either cut down that particular frequency or boost it in the mix..
  • High Performance: All 7 Band knobs are designed for the best grip with a precision stop point at 0 db gain. Each adjustment allows a -12dB to +12db on each frequency point with a 20dB headroom, that is able to amplify the signal with high peak levels without any signal compression, or distortion..
  • Upgrade Today, Hear the Difference: Manufactured using some of the highest quality and most reliable electrical components, many with 1% tolerance components throughout..
Check Stock

NATGAI Steel Spring Hanger Vibration Isolator for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • High Quality: By using 3mm thick steel, high quality spring and silicon material, this product provides high efficiency in absorbing vibration, it is fully matched to requirements of interior decoration..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

AD8317 Logarithmic Detector, RF Log Detector Logarithmic Detector, Logarithmic Detector RF Signal Log Output Power Meter 1M-10000MHz Controller

  • [Main function]: This logarithmic detector is designed for ADI's AD8317 chip and is used for RF signal power detection..
  • [Detection frequency range]: The detection frequency range of the logarithmic detector is 1M-10GHz, and it can detect RF signals with a power of -55dBm to -0dBm, and convert the RF signal into a DC voltage output..
  • [Excellent performance]: The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which will expand the dynamic range of the detected signal by 55dB..
  • [Wide use]: The logarithmic detector is widely used in radio frequency signal detection, signal power measurement, environmental field strength detection, and can also be used as a component of automatic gain control and automatic level control..
  • [Stable and durable]: This logarithmic detector can withstand high and low temperatures, is stable and durable, with a temperature measurement range of 0°C to 1024°C, and a converter temperature resolution of 0.25°C..
Check Stock

Professional Upgraded DDS Signal Generator Counter, Seesii 60MHz LCD Display High Precision 200MSa/s Dual-Channel Arbitray Waveform Function Generator Frequency Meter

  • ...pts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened..
  • 【Storage And Custom】 You can store 99 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 60MHz. 200MSa/s sampling rate. It has 60 positions for saving user-defined waveform. In addition, it has a very good software package that allows you to create your own waves and frequency combinations. After you save them, you can disconnect the unit from the computer and use them for any applications you wish..
  • 【High Precise】 Using Dual-channel DDS signal and TTL electric level output to generate precise, stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Sawtooth wave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters.Duty cycle of each channel can be adjusted separately. Precision can be 0.1%..
  • 【Frequency Meter】With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting func....
Check Stock

Globact RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC Consistency Tester,RC Helicopter Tester Tool)

  • 【High Srecision】The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds).
  • 【Button The Select】 (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic).
  • 【Keys Pulse Width】1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz.
  • 【Powerful Testing Function】RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display.
  • 【How To Use】Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.
Check Stock

Pulse Generator, DROK 2pcs LCD Display PWM Frequency 1Hz-150kHz Duty Ratio 0-100 Percent Adjustable Square Wave Rectangular Wave Signal Generator Board

  • DROK pulse generator module operating voltage range is DC 3.3-30V, adjustable pwm frequency range is 1Hz-150kHz, adjustable duty ratio range is 0%-100%..
  • Application: it can be used as a square wave signal generator, generate square wave signal for experimental development.
  • generate square wave signal to control the motor driver.
  • generate adjustable pulse to control the relevant circuit (PWM dimming speed application etc)..
  • High Frequency Resolution: frequency in range 1Hz~999Hz, display resolution is 1Hz.
  • range 1.00kHz~9.99kHz, display resolution is 0.01kHz.
  • range 10.0kHz~99.9kHz, display resolution is 0.1kHz.
  • range 1kHz~150kHz, display resolution is 1kHz..
  • TTL Level Communication: the frequency meter is designed with single-chip TTL level communication, communication standard is 9600 bps..
  • LCD Display: the blue LCD clearly displays frequency and duty ratio, PWM output can set frequency and duty ratio independently..
Check Stock

Agatige Frequency to Voltage Converter Module, 0-10Khz to 0-10V F/V Digital to Analog Converter Conversion Module

  • FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
  • FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
  • ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
  • APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
  • MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..
Check Stock

20 ft Foot 2 Dual RCA Audio Cable for Stereo CD DVD Amplifier Mixer DJ PA

  • ...【Stereo Interconnect Cable】 Devinal Dual 1/4 inch mono to Dual Rca cable is designed to connect gear with stereo unbalanced phone jacks to gear with stereo phono jacks.
  • Delivers high performance and versatile full range bass for your musical instrument audio device equipment.
  • Accurately transfer high bandwidth frequency quality detailed clean natural pure audio sound / realism and clarity jitter-free in audio signals..
  • ★【Excellent Sound】 Heavy-duty and high-density shielding for effective EMI and RFI suppression and flexibility ensures high-quality audio transmission without static or pop-up. corrosion resistant,excellent signal quality. Oxygen Free Copper Lines combined with a double shielding allow for a maximum audio quality.
  • minimizes return loss, so music, dialogue and sound effects are always clear, dramatic, detailed in excellent signal quality..
  • ★【Durable】 Gold-plated 1/4 TRS and RCA plug. Make the cable more durable than nickel or other materials. Top quality Flexible Rubber Jacket made by environment-friendly material improves high quality signal transfer. Polyethylene insulation improves high frequency response. Accurately transfer high bandwidth frequency quality detailed clean natural pure....
Check Stock

Party Up [Explicit]

  • DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by console) by wireless way..
  • No time delay when signal data is transmitting, signal data is real time and reliably..
  • Communication distance: 400M (visible distance).
  • High effective GFSK modulate,communication design.
  • 126 channels jumping frequency automatically, high anti-jamming ability..
  • 7 groups ID code settable,User can use 7 groups individual wireless net without any interfere each other in the same place..
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 10

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 20

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock