Best High low Screw

CNCCANEN Ballscrew SFU1204-300mm with BK10/BF12 + SBR12-300mm Linear Rail Guide Set SBR12UU Block Bearing Sliding Shaft Rod Kit for CNC Machine DIY

High service life time due to low friction.
Ball screw diameter:12mm, ball screw pitch:4mm, ball screw length:400mm(15.75 inch).
The total length is 400mm and the effective ball screw length is 335mm.
Do not remove the ball screw nut from the ball screw, because it is matched, or it will be difficult to install it again.

Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (50 pcs)

【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..

Check Stock

SFU2005 300mm Ballscrew kit + Set BK/BF15 Kit + 2005 Ballscrew RM2005 L300-1000mm ball screw with Ball Nuts + Screw Nut Housing for CNCRouter Machine

【Package Include】- End Machined ballscrew SFU2005-300mm/11.81inch length with nut + BK15/BF15 end support with locknuts and circlips + 2005 Ball nut housing..
【Basic Description】- SFU2005 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
【End support & Nut Housing】Ball screw vertical end supports BK15 and BF15, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 2005 nut housing matching ball screw, simple assembly and convenient installation..
【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
【Application Areas】- SFU2005 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation d....

Check Stock

46mm Low Profile Tripod Head with 3 Screw Adapter 3/8 to 1/4 Professional Aluminium 360 Rotating Panoramic Ball Head Max Loading 44lbs/20kg

... and Hollowed out quick release plate clip, 0.1 mm machining tolerance, anodic anodized, ultra high strength aviation aluminum alloy. It’s solid, stable and high quality.
【WIDE COMPATIBILITY】: The ball head can be used with tripod, monopod,camera slider,for installing camera, DV, mobile phone, telescope. 1/4 " screw quick shoe plate screw and a 3/8 " thread tripod mount screw. Quick release plate compatible with Acra RRs, etc.
【Packing & After-sale】: 1*Low profile Tripod + 3*Screw Adapter 3/8" to 1/4", ☎️we promise 12 months After sales service from the date of purchase. If you have any problems within the quality guarantee period, we will refund or resend. we are always ready to hear your voice (reply within 24hrs).

Check Stock

Oem liftmaster chamberlain Genuine Screw Drive Coupler

Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current).
Replaces sprocket coupler on screw drive rail assemblies..
Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current), models 1000SD, 2000SD, 1000SDR, 2000SDR, 2110, 2220, and models 4600, 4620, 4640, 9902, PD420, PD460.

Check Stock

2mL Autosampler Vials with Caps, HPLC Vials, 9-425 Amber Glass Vial with Blue Screw Caps/Writing Patch/Graduation, White PTFE & Red Silicone-1000 Pcs

2ml Amber autosampler glass vials with screw caps,12mm Diameter,32mm Height,9-425 screw top. Our vials with caps are widely used in standard HPLC and GC applications. The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Agilent, HTA, Shimadzu, Thermo, Varian, Waters, etc..
Autosampler vials with unique screw design ensure the consistency of the seal. Blue polypropylene screw cap including silicon septa and PTFE ideal for compound sample storage in the chemical industry, pharmaceutical industry, and scientific research laboratory..
2ml sample vials are made of high-quality borosilicate glass, low content of free ions, low coefficient of expansion, and very high chemical resistance. It is suitable for containing all injectable preparations with acid, neutral and alkaline pH. Temperature range from -76F to 248F..
Amber vial with large writing patch for sample identification and white printed graduations in 0.5ml increments..
These series of sample glass vials with screw caps are suitable for various automatic samplers for thin neck bottles.Easy to use..

Check Stock

RATTMMOTOR RM/SFU1605 BallScrew Kit, 500mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine

【Package Include】- End Machined ballscrew SFU1605-500mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devic....

Check Stock

RATTMMOTOR RM/SFU1605 BallScrew Kit, 1000mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine

【Package Include】- End Machined ballscrew SFU1605-1000mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devi....

Check Stock

RATTMMOTOR RM/SFU1605 BallScrew Kit, 350mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine

【Package Include】- End Machined ballscrew SFU1605-350mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devic....

Check Stock

142pcs Threaded Inserts Repair Kit, Stainless Steel Helicoil Type Wire Insert Installation Set

【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..

Check Stock

RATTMMOTOR SFU1204 Ballscrew Kit, SFU1204 RM1204 Ball Screw 400mm Length + Ball Screw Nut Housing+BK10/BF10 End Support +Ballscrew Nut Housing for CNC Router Engraving Machine Milling Machine

【Package Include】- End Machined ballscrew SFU1204-400mm length with nut + BK10/BF10 end support with locknuts and circlips + 1204 Ball nut housing..
【Basic Description】- SFU1204 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
【End support & Nut Housing】Ball screw vertical end supports BK10 and BF10, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
【Application Areas】- SFU1204 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devices, et....

Check Stock

Liftmaster 25C20 Screw Drive Sprocket Coupler

Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current).
Also replaces some Chamberlain models Same as Part number 25A18.
Replaces sprocket couplers Use on screw drive rail assemblies.
Replaces sprocket coupler on screw drive rail assemblies..
Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current), models 1000SD, 2000SD, 1000SDR, 2000SDR, 2110, 2220, and models 4600, 4620, 4640, 9902, PD420, PD460.

Check Stock

InLine 34601 Firewire Adapter 6 Pin Female to Male

【SAFETY AND SECURITY】RJ12 screw terminal adapter can ensure a firm and non-corrosive connection. The fixed RJ12 interface and compact design can effectively shield the external electromagnetic signal interference. RJ12 screw terminal adapter has strong signal stability and reliability..
【100% BRAND NEW AND HIGH QUALITY】The compact design and reliable connection of this RJ12 screw terminal adapter make the signal more stable and the connection more convenient, which greatly facilitates your use..
【PLUG AND PLAY]】This RJ12 screw terminal adapter has a clip that is easy to snap, easy to carry, and easy to insert and remove. The size of the adapter: 50*20*11mm. The adapter is small and light, so it is very easy to use..
【HIGH-QUALITY MATERIALS】This RJ12 male to 6-pin threaded connector is made of high-strength flame-retardant plastic, durable, tear-resistant, high and low temperature resistant, impact resistant, scratch resistant, high quality and durable, and can be used for a long time..
【100% SATISFACTION GUARANTEE】The screw terminal adaptor is highly performance and of premium quality but if there is any quality problems with our product please don't hesitate to contact us, we will provide you the most friendly customer service..

Check Stock