Best High performance End Mills

Niagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

• 2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
• General purpose end mill for working on all types of materials.
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
• Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
• Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

• Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
• Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
• Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
• Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
• Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

• Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
• Four flutes produce a better finish than fewer flutes.
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
• Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Niagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

• 4 Flute design for creating finer finishes and creating a higher metal removal rate.
• General purpose end mill for working on all types of materials.
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
• Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
• Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

• 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
• Hardened and ground For Bridgeport type milling machines.
• Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
• 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
• For double and single end mills (single end mils only for sizes over 5/8").

Hakkin 20 Pcs Carbide Rotary Burrs Set, End Mill CNC Router Bit, 1/8\ Shank Nano Blue Coating Ball Nose End Mill, Double Cut Coat Rotary Drill for Die Grinder Woodworking, Engraving, Drilling, Carving

• TUNGSTEN CARBIDE: These end mills are made from high quality tungsten carbide for good hardness ,so these milling cutters have sharp edge..
• POLISHED AND TITANIUM COATED SURFACE: Well polished and titanium coated surface has a better anti-rust performance.surface is quite clean, neat, and there is no glitches or burrs on the shank..
• SHARP: These CNC cutter router bits have sharp cutting edges, can be use for milling holes, grooves and edges on plates, smooth cutting..
• 10PCS/SET: There are 10pcs end mills in this set, great replacement for your drill tools..
• HANDEL DIFFERENT MATERIAL: These milling cutters can be used to drill many items or materials, such as circuit boards, hardware parts, plastics, copper and stainless steel..

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

• 4 Flute design for creating finer finishes and creating a higher metal removal rate.
• General purpose end mill for working on all types of materials and high temperature alloys.
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
• Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
• Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.

LittleMachineShop.com 4 Flute Ball End Mill Set, High Speed Steel, 6 Piece (2903)

LittleMachineShop.com #3 Morse Taper End Mill Holder Set, 5 Piece (1636)

• Set of five 3 Morse taper end mill holders.
• Compatible with Mills with 3 Morse Taper Spindle.

LittleMachineShop.com R8 End Mill Holder Set, 5 Piece (1258)

• Set of five R8 end mill holders from 3/16" to 3/4".

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8\ to 1/2\ (Pack of 6)

• Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
• 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
• Stub length end mills for extra rigidity.
• Fitted wood block stand included and each size comes in a marked plastic tube.
• Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

• Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
• Four flutes produce a better finish than fewer flutes.
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
• Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

• High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
• Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
• Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
• Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
• Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....