Categories

Best High performance Steel Taps

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Azuno 60PCS Metric&SAE Tap and Die Set, Titanium Coated GCr15 Bearing Steel with T-Handle/Wrench/Gauge/Screwdriver in Storage Case, Master Threading Toolkit

  • 【60pcs Titanium Coated Tap and Die】: Set includes 54 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Constructed by quality GCr15 bearing steel with titanium coating that ensures higher durability in threading..
  • 【Common Sizes in Metric & SAE】: 10MM Dies&Taps: 3x0.5,4x0.7,5x0.8,6x1.0,7x1.0,8x1.25,9x1.25,10x1.5,10x1.0,12x1.75.
  • 10UNC Dies&Taps: 4-40,6-32,8-32,10-24,12-24,1/4,5/16,3/8,7/16,1/2.
  • 6UNF Dies&Taps: 10-32,1/4,5/16,3/8,7/16,1/12.
  • 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced ductility. Titanium coating on the finish ensures higher durability on hard metal..
  • 【Easy for Storage】: Comes with a heavy-duty storage case, convinient for storage and carrying. It has identified slot for each piece so that to keep neat and easy finding..
  • 【Versatile Threading Tool Set】：This MASTER set is perfect for cutting and renewing external and internal threads to exact standards. Durable to process on hard metal such as alloy, steel and brass, for all-day performance in the shop or home project..
Check Stock

6mm x 0.75 Metric Taper and Plug Tap Right Hand Thread M6 x 0.75mm Pitch

  • Reliable Material: High‑speed steel taps are with high hardness and wear resistance. Uncoated taps have only a basic substrate without any additional coatings, and fit a wide range of applications..
  • Practical Function: There are a total of two taps to facilitate the alignment of the tap and the tapping hole to ensure that the tap and the hole are perpendicular to each other and tapping smoothly. It also has a smoothing effect on the thread (removes burrs). Suitable for thick steel, rubber, aluminum, copper, and wood..
  • Good Helper: Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Can make new threads or re‑thread damaged or jammed threads.Number Of Threads: 3. Thread Tolerance Grade: 0.014. Through Hole/Blind Hole: Through Hole. Material: High speed steel. Tap Style: Straight groove. Thread Code: Standard thread..
  • Suitable for: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g. water) can extend the service....
Check Stock

Azuno 40PCS Tap and Die Set in SAE Size, Titanium Coated GCr15 Bearing Steel with Handle/Wrench/Gauge/Screwdriver in Storage Case, Essential Threading Toolkit

  • 【40pcs Titanium Coated Tap and Die】: Set includes 34 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Constructed by quality GCr15 bearing steel with titanium coating that ensures higher durability in threading..
  • 【Most Common Sizes in SEA】: 10 UNC Dies & Taps: 4-40, 6-32, 8-32, 10-24, 12-24, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13.
  • 6 UNF Dies & Taps: 10-32, 1/4"-28, 5/16"-24,7/16"-20,1/2"-20.
  • 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced ductility. Titanium coating on the finish ensures higher durability on hard metal..
  • 【Easy for Storage】: Comes with a heavy-duty storage case, convenient for storage and carrying. It has identified slot for each piece so that to keep neat and easy finding..
  • 【Versatile Threading Tool Set】： This professional set is perfect for cutting and renewing external and internal threads to exact standards. Durable to process on hard metal such as alloy, steel and brass, for all-day performance in the shop or home project..
Check Stock

HORUSDY 60-Piece Master Tap and Die Set | SAE Inch and Metric Sizes | for Coarse and Fine Threads Tools

  • Made of high-quality hardened alloy steel, durable and superior strength. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
  • Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE and metric taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
  • All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
  • Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..
Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • ...harts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
  • Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

  • Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
  • Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
  • Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
  • NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
  • Uncoated Tools for Versatile Use: Unco....
Check Stock

Tap Magic 10004E  W/EP-Xtra - 4 oz,

  • Used to make new threads or re-thread damaged and/or jammed threads.
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power.
  • Hand taps are popular for use in general machine tapping or CNC tapping.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

60-Pc Master Tap and Die Set - Include SAE Inch Size #4 to 1/2” and Metric Size M3 to M12 Coarse and Fine Threads | Essential Threading Rethreading Tool Kit with Complete Accessories and Storage Case

  • ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
  • ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock

Drill America DWT54511 5/16\-18 UNC High Speed Steel Tap Set

  • Used to make new threads or re-thread damaged and/or jammed threads.
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power.
  • Hand taps are popular for use in general machine tapping or CNC tapping.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock