Categories

Best High performance Welding Clamp

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

QWORK 260/300/500A Ground Welding Earth Clamp, Brass A-shape Welding Ground Clamp Cable Copper Grip for Welding Machine ( 260A )

  • Brass: QWORK Ground Welding Earth Clamp is made of high-quality brass, excellent conductivity, oxidation resistance and long service life..
  • Wear-resistant: The A-type clip is not easy to fall off, it is safe and reliable to use, electroplated, and wear-resistant..
  • Various types of welding: Suitable for argon arc welding, submerged arc welding, resistance welding, stud welding and other welding equipment..
  • Easy to operate: Simple structure, convenient operation, stable performance, high reliability, it is a perfect substitute for manual welding machine..
  • Wide range of uses: Widely used in shipyards, machinery manufacturing, petroleum exploration, automobile manufacturing and other industries..
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

hynade Brass T-Style Welding Ground Clamp 300-Amp Wide Jaw Clamp Tool

  • Ground clamp size :7 inches long, 1.18 inches max chin opening.
  • The welding ground clamp adopt high-quality brass material, sturdy structure, strong grip, multifunctional wide-jaw grounding clamp.
  • The clamp tool suitable for most grounding situations, specially designed for heavy-duty high-current welding applications/MIG/MMA/TIG/plasma welding/cutting machines.
  • Large contact surface area provides good cable connection and positive grounding.
  • If have any questions, please contact us and we will provide you with 100% satisfactory service.
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

Mellcom CT520D Welding Machine 50Amp Plasma Cutter, 200Amp TIG Welder 3 in 1 Multifunctional TIG/MMA/Plasma Cutter, 110/ 220V Dual Voltage 1/2 Inch Clean Cut with LCD Display

  • USE MOS TRANSISTORS: The powerful electric welding machine performs better than IGBT welding at a lower voltage, and performs well in the high-frequency working section, and the frequency can reach more than 300kHZ. MOSFET power device with unique control mode improves the reliability of the welding machine..
  • SUPPORTS 3 WELDING MODES: Perfectly applied to the three electric welding functions of TIG/ MMA/ PLASMA, allow you to weld stainless steel, alloy steel, and carbon steel and other nonferrous metals. Connect the wires to different interfaces (operate according to the product manual) , Each welding mode can work effectively in 110V/220V voltage environment. This multifunctional electric welding machine meets various daily needs..
  • PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 32 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • WHAT YOU GET: We have equipped this electric welding machine with more excellent product accessories-1 x Argon arc welding torch, 1 x PT-31 cutting torch, 1 x 300A welding torch, 1 x 300A grounding clamp, 1 x Oil-water separator, 4 x Hose clamps, 2 x Copper streets, 2 x Nozz....
Check Stock

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • ...welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs great. Less splash, simple usage and great welding seam..
  • Wide Applications- Mig welders 110/220 volts with gas is super portable and light. In addition, the machine is with powerful functions and suitable for wide occasions. It can be used for hardware welding materials, home DIY, industrial installation, automobile maintenance, machinery manufacturing, engineering operations, steel structure welding. A great choice for home repairs and hobby projects on light gauge steel..
  • Packing List -1X soldadora inverter 110v 220v Dual Voltage MIG 130D/ 1X Ground clamp/1X Welding holder/ 1X MIG welding torch/1X Flux cored wire 1kg/ 1X Welding hose/1X 20cm Conversion Line/1X V-shape wire feed wheel/ 1X Gear wire feed wheel ( installed on the machine)/ 2X 0.8mm Conductive tip/ 2X Porcelain nozzle/ 2X Hose clamp.
Check Stock

Oumefar Welding Electrode Clamp, 400 Amp Twist Type Holder Welding Electrode Rod Holder Welding Electrode Twist Type Full Copper (Black)

  • COMPACT DESIGN ---- Welding electrode holders have strict quality control and quality assurance, compact design, small size, and the handle conforms to ergonomic design, and the work experience is more labor-saving..
  • FAST AND CONVENIENT ---- Type Holder Welding Tool has excellent workmanship and practicality, 400~500A universal, welding electrode clamp is more convenient to choose welding rod, which will help you to weld materials quickly and conveniently..
  • USED FOR ---- The welding Twist Type Full Copper holder adopts advanced technology and exquisite craftsmanship, and welding electrode clamp is not hot for long-term welding. Welding electrode clamp is used as a welding electrode holder for various rod electrodes..
  • WELDING ELECTRODE CLAMP ---- Type Holder Welding Tool have 1 x electrode holder, 1 x hex wrench, 1 x spacer and 1 x spacer post in the package. You can choose from black and yellow to meet your needs..
  • SERVICE ---- We launch products that meet your needs, and you will get our 100% problem-free guarantee. Customer's smile is our first goal,if you have any question,....
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

IRWIN VISE-GRIP Original Locking Pliers with Swivel Pads, 11-Inch (20)

  • PREMIUM HIGH-CARBON STEEL MATERIAL - The welding clamp tools set is made of heat-treated high-quality high-carbon steel material, with high hardness, large torque, strong and tough, stable and reliable. In addition, the product has a nickel-plated coating to prevent rust and corrosion, and has a long service life..
  • ADJUSTABLE SWIVEL PADS AND SAFE TRIGGER RELEASE - The wood working locking pliers come with a swivel pads, which can work on tapered, awkward and delicate objects without damaging the surface of the object. The product is equipped with a trigger release, which can provide quick release to provide maximum locking force and help prevent accidental release..
  • COMFORTABLE HANDLE AND ADJUSTABLE SCREWS - The handle of the C-clamp locking pliers adopt an ergonomic design, is easy to open, has good comfort and control, and can be grasped from any angle to provide better grip. The C-clamp welding tools come with adjustable screws to adjust size and pressure to provide firm clamping force during work..
  • WIDE RANGE OF USES - The C-clamp locking pliers have a wide range of uses. The large opening jaws can fix and clamp objects of various shapes and materials, which are very suitable for wood working, welding, electrician maintenance and so on. In addition,....
Check Stock